Craig… you the man!!! Thanks for doing this. mine showed up today. I will watch this 4 or 5 times. And it’s going into my Sketer. 🤞🏻 thanks so much for doing this.

@WTFRCCars

2 жыл бұрын

It's a fantastic receiver you will be happy with it :)

Great video thanks. I’ve got one of these and was going to put it in my drift car but went Yokomo V4. These would be great for on road and off road racing.

Thank you Sir!! You are the Noble Master for me and many many other people! Thank you very very much for all of your great videos!

@WTFRCCars

Жыл бұрын

Glad ya like em :)

Thank you indeed for this short and very helpful introduction! I am new to FlySky equipment and it helps me a lot!

@WTFRCCars

6 ай бұрын

Glad ya like it :)

Thanks for sharing. I bought my Noble Pro after looking through your great videos! Now I have to get a couple of these recivers✌🏼

@WTFRCCars

Жыл бұрын

You will be amazed at what's coming for the noble pro ;)

@scalebuilder_sweden

Жыл бұрын

@@WTFRCCars That sounds interesting 👍🏻

Just what I needed🙂Thank you so much for this review 😀

First, I know, I'm "a little behind"...but, better late than never, right? Second...and (much) more importantly...a HUGE "thank you"...not only for this NB4-related video, but for ALL the NB4 videos you've done (and, hopefully, will continue doing). Not only have you done more for the NB4 (for years) then any other KZreadr...but, you've done more for it then even FlySky has. In essence, you've created a "video manual" that's FAR more 'complete' than anything (printed, or video) FlySky could have EVER done - your videos are the quintessential 'go-to' for NB4 users arrive the world. I'm 1,000% certain that they're are countless others who will completely agree with me on what I'm about to say.......... Without your videos, I'd be "completely lost" on the NB4. When I purchased the NB4, I got it to 'compliment' my Futaba 7PX (hahaha & land race vehicles on 7PX, boats & crawlers on NB4)...but, as time goes on, and FlySky releases more "advanced" receivers, I find myself coming up with more & more excuses (oops...I means 'reasons') to use the NB4. Not saying I'll get rid of the 7PX...but, just as my Hitec X2 AC Black became my backup/secondary charger after I purchased the iCharger 406 Duo, I could (potentially) see the 7PX becoming my 'secondary' Tx. Please, keep up the outstanding job...and I (plus countless others) will look forward to future 'chapters' in our "NB4 Video Users Manual". 👍🏼👍🏼 🤙🏼

@WTFRCCars

2 жыл бұрын

Thanks 👍 glad you like the vids an yeh I will be doing more :)

This was definitely needed that was the only reason I haven't used my NB4 for speed runs

@rastayouth12

Жыл бұрын

I know you said the set up is the same but would you please do the setup on the NB4 as there are some feature differences between the NB4 & the Pro?

@WTFRCCars

Жыл бұрын

Yeh definitely as there are a good few things that the pro can do that the nb4 can't now

I've been waiting for this RX as It really completes the overall Noble package. Great video and your explanation of the "Priority" setting really helped. I'm also glad flysky made the RX full featured from day one and like you, I think the small form factor is ideal. I don't know of any other surface gyro receiver that's as feature packed as this one, they really thought it out. The "Priority" setting alone is such a great option as it can give you more of a hands off approach to stabilization yet still give you enough to keep those 2wd vehicles from spinning out. One thing I'd like to know is whether or not you can run that RX in "2 way, 2 channel" mode for improved latency or does the gyro processing reduce the response compared to the same setting on another RX like the FGr4S.

@WTFRCCars

2 жыл бұрын

I'll have a look for ya on the 2 way 2ch set up :)

Just bought the receiver on Ali Express for $42.00 I hope I can get it to work with my nb4 and thanks for the video

@WTFRCCars

Жыл бұрын

Works fine with the nb4 :)

BRAVO! I keep coming back to your videos, your an asset, keep those videos coming. Question why don't you post some racing videos?

@WTFRCCars

Жыл бұрын

Just did one :) kzread.info/dash/bejne/foSL0rp7pbibe7g.html

and I just bought the agf gyro. just installed it yesterday

@WTFRCCars

Жыл бұрын

The AGFRC ones are really good gyros very fast and easy to set up too

WOW, Thank you for your videos! They gave me the confidence I could set this up, so I just bought one! Any Chance you could run through this set up on the NB4? I get hung up at the assigning the SVC spot in the video. I understand this function in not available for the NB4 right now, but how do I continue on with the programing after this point?

@WTFRCCars

Жыл бұрын

You just set it up in the menu the only difference is that you can't assign the functions everything else is the same :)

Nice video! I bought an NB4 and wondering which sensor to get for speed, temp and battery voltage. Thanks

@WTFRCCars

2 жыл бұрын

There at the bottom of the page when you scroll right :) www.flysky-cn.com/nb4-peishi

Thanks for your video! I Love your channel. Are there more Noble Pro Firmware updates ? I only see the 1.01 US Version for my Noble Pro but for my Noble I can update the 2.0.100 firmware version. :P

@WTFRCCars

2 жыл бұрын

Nope no new updates yet for the pro.

@WTF RC Cars Do you know where these can be found now? I don't see them on US Amazon or anywhere. I'm in the US. Thanks for all your info on Noble in your videos.

@WTFRCCars

Жыл бұрын

I think they are sold in it everywhere hobbymatehobby.com/products/flysky-rc-noble-nb4-gyro-receiver-4-channels-inr4-gyb-for-flysky-nb4-noble-lite-noble-pro-radio-transmitter-afhds-3

So… I got it working out the car. Just a heads up, but maybe I’m missing something, but I’m not able to program in the controls assign menu short cuts for gain or on and off. I’m happy I can do it through the SVC icon on the radio.

@WTFRCCars

2 жыл бұрын

Yeh that's where your supposed to do it.

@paullevine9598

2 жыл бұрын

In the video he assigns the svc controls to the transmitter variable pots, so you don't have to go to the menu and click and scroll, you just adjust the transmitter controls

If I knew FlySky would release this, I wouldn’t have spent money for another FGr4S… I might still look into one though. Been hoping for a gyro receiver since getting my NB4 a few months ago.

@WTFRCCars

2 жыл бұрын

Receiver aways come in handy for when you get another RC ;)

Guy, I'm looking to replace my acoms technisport handset set which I use in my Tamiya falcon 😊 would this be good upgrade because I would still like to run the old girl 🤔

@WTFRCCars

Жыл бұрын

Both the nb4 and pro would be a huge upgrade from the old acoms :)

Craig. How are you?. I was trying to setup the gyro SVC function but my noble nb4 does not have the option svc to assign.

@WTFRCCars

Жыл бұрын

Just use the SVC menu on the nb4

What do you think the range of this receiver would be like? Similar to the standard FGR4?

@WTFRCCars

Жыл бұрын

Yeh much the same as fgr4 or fgr4p or fgr4b as it has external antenna

hello brother, can't find the svc steering gain in the assign menu, im ruining the regular nb4

@WTFRCCars

Жыл бұрын

The nb4 can't assign functions only the pro can

Hello. I was wondering for those drag racers if you use this and set the ESP on lock would it be a useful receiver for them the keep the vehicle straight going down the track?

@WTFRCCars

2 жыл бұрын

Yeh it would definitely be an advantage for drag RC but it's also against the rules for most drag racing

@The916porsche

2 жыл бұрын

@@WTFRCCars oh i didn't know about that as a rule, but could see it as a full driving experience to control the whole car. I came from slotcars where it's about cutting the .000 light and was thinking of making a 1/24 scale type rc drag car and portable track.(Christmas tree and timer lights. Don't think many could keep a 1/24-1/32 scale 110mph+++ car straight in 55 feet with out help and keep it in a 4 inch lane.

Would the LOCKED setting be something more suitiable for speed runs?

@WTFRCCars

2 жыл бұрын

Really depends and I'd always say try it at a slower speed to see how it reacts and then choose the setting that suits your driving :) the basics are normal it behaves like a standard gyro, locked it will try to lock the direction your wheel is pointing

Where can I get these please bud I noticed you haven't left a link for them in description, are they out yet great upload 👍 I need one of these in my life thanks for sharing

@WTFRCCars

2 жыл бұрын

Not in UK yet but hobbymate has them on USA Amazon

@NoLimitRC87

2 жыл бұрын

@@WTFRCCars thanks buddy will be ordering 1 for sure

@WTFRCCars

2 жыл бұрын

It's definitely a fully featured stability control receiver :)

Great videos. Question. The INR4 GYB is 4 channel only, so what is an IBUS receiver for and will that allow me to have more channels for telemetry and led lights. I would like SVC and GYO functions. There is another voltage sensor that is a black and white wire that comes with the receivers. What is that for and do I also need to purchase CVT01? thanks in advance

@WTFRCCars

Жыл бұрын

The bvd black and white wire is for external voltage monitoring and has its own port so you don't lose a Ch, you could turn one of the channels into ibus and run the 4ch ibus add-on to get 7ch so no you don't need the cvt01 for voltage with them :)

@PATRICK-zo4bw

Жыл бұрын

@@WTFRCCars excellent. thanks a lot.

@PATRICK-zo4bw

Жыл бұрын

forgot to ask which 4ch ibus add-on would be suitable to work with the INR4 GYB

@WTFRCCars

Жыл бұрын

It's the cev-04 www.flysky-cn.com/cev04-canshu

I’m not getting Svc as options for gyro channel control ? Any solution?

@WTFRCCars

8 ай бұрын

SVC will be there unless you have it hidden in the menu options

Any chance of doing one on the nb4 as when selecting tr3 click function there's no svc in the list

@WTFRCCars

Жыл бұрын

The nb4 can't assign SVC functions unfortunately only the noble pro has this option.

I have the nb4 with latest update, but in the "assign" section "svc" does not show at all.... does those "svc" options under Assign only show on the Pro and not the NB4?

@WTFRCCars

Жыл бұрын

Yes only the pro can assign the option's

@CamaroWarrior

Жыл бұрын

@@WTFRCCars thanks for the reply... so any other way to adjust the gyro at all or not with the nb4?

@WTFRCCars

Жыл бұрын

Yeh you can adjust it in the nb4 menus just not able to assign them to buttons like the pro can :) you still have full control of the settings though :)

I have the NB4 (not Pro) and am unable to assign dials to the SVC function as shown with the NB4 Pro in this video. Wondering if you ever tried this? I am running 2.0.100 FCC on my tx.

@WTFRCCars

Жыл бұрын

Yeh the nb4 can't do it yet need new firmware

@jondilly1974

Жыл бұрын

@@WTFRCCars thanks for the quick reply. I will keep an eye out for the FW update.

Can You also daisy chain all Your sensors straight into the Rx? Is there any form of telemetry logging so You can view it after a run? Im not coming away from traxxas or arrma or losi(spektrum). Im running away as fast as I can. My NB4 is on its way.

@WTFRCCars

2 жыл бұрын

I've just got done with a vid on the sensors will be live this week some time :), yes you can daisy chain the sensors all into one port but no there is no logging but it does have alarms for each sensor high and low so you get a warning when ever any sensor goes out of the monitoring range you set :)

@reinierwelgemoed8171

2 жыл бұрын

@@WTFRCCars Great stuff thank You so much. Your channel is the reason I made up my mind to go with the FlySky Noble and not a super expensive Futaba.

@WTFRCCars

2 жыл бұрын

Yeh they are really good and thanks :)

Hey I'm following your steps but with NB4 (Not the Pro) I'm trying to assign the SVC but I cant find it for any buttons , any idea ? I have in the 2nd page SVC menu (calibration and more)

@WTFRCCars

Жыл бұрын

The nb4 can't do the assessment part only the pro can.

@runnerbaba

Жыл бұрын

@@WTFRCCars Oh, i searched the same. So it can do all the same, but i have to go in the menue at change it manually there? thanks sir

@WTFRCCars

Жыл бұрын

Yep until there is a firmware update ;)

Hallo, ich bräuchte Hilfe. Ich habe die normale nb4 aber finde im menue für die Schalter nicht das steering gain. Das fehlt😢

@WTFRCCars

10 ай бұрын

Have you updated the firmware to the latest ?

@Zstreetfighter18

10 ай бұрын

@@WTFRCCars oh nein... Nur die von dem Empfänger

would like to assign svc steering gain to button TR3, but I can not find "svc steering gain" in the menu. What is it called on the NB4?

@WTFRCCars

2 жыл бұрын

NBR can't assign SVC settings in the current firmware.

@b.andersen7523

2 жыл бұрын

Okay, thanks for the reply and a very good channel.

My only issue is that I'm not seeing the SVC settings as options for button assignment on the NB4. I have the latest FCC firmware, so I'm wondering if only the NB4 Pro has this assignment option. Perhaps there's a firmware update due out for the NB4.

@WTFRCCars

2 жыл бұрын

What firmware do you have on the nb4 2.0.100 is the current one

@maxsweet

2 жыл бұрын

@@WTFRCCars Yep, that's mine. No ability to assign any SVC functions to button on the radio. This firmware precedes the release of the receiver. I suspect the next update will address this.

@WTFRCCars

2 жыл бұрын

Yeh it's likely :)

@paullevine9598

2 жыл бұрын

I'm having the same issue, there are no svc assignments available. And running current firmware. I didn't know if that option was only for the noble pro. But I'm waiting to find a solution. Hopefully someone can help

@WTFRCCars

2 жыл бұрын

Yeh it's only the pro at the min that can assign to adjust on the fly, hopefully a new firmware will allow this on the nb4 and NBR lite :)

finally got myself 2....

I still can't get the SVC to work on the NB4.😢😢😢

@WTFRCCars

Жыл бұрын

What can't you get to work and what firmware do you have on the nb4

how do i get one of these receiver ~ there not available anywhere?

@WTFRCCars

Жыл бұрын

They where on Amazon and AliExpress but think there sold out at the min :(

I have updated transmitter and now trying to bind and it wont. Put the transmitter in binding mode, held the bind button and binding plug in and power on - nothing. what am i missing or is something at fault. please advise. -subscribed Thank you!

@WTFRCCars

Жыл бұрын

You need to update the receiver too :)

@km7101

Жыл бұрын

@@WTFRCCars Thank you for quick reply. after updating the transmitter the flysky assistant does not see the receiver so I can update it. Is there any other way to update the receiver? Thank you

@WTFRCCars

Жыл бұрын

Yeh just look through my playlists I have them all

@km7101

Жыл бұрын

@@WTFRCCars Just followed it to the letter and it has been binded - Thank you! Any idea why after a few turns of the wheel on the transmitter to the left it says signal lost. I turn the wheel left and when it returns to neutral the receiver led goes off. This does not happen when turning the wheel to the right.

@WTFRCCars

Жыл бұрын

Low power to the esc and the left endpoint is not set correctly so the servo is drawing too much current

Greg do i need to updated my nb4 again to use this gyro receiver?

@WTFRCCars

Жыл бұрын

You need to be on 2.0.100 firmware on nb4

@runnerbaba

Жыл бұрын

@@WTFRCCars i am still on 2.093 and i have SVC on my NB4? or what would be the benefits? i dont want to update all my cars....

@WTFRCCars

Жыл бұрын

Always update to the latest firmware or you will have strange issues like the RC working then after a few min it gets slower and then stops until you power off and back on :)

My NB4 doesn’t have the SVC option on any switch

@WTFRCCars

Жыл бұрын

Only the noble pro does on the current firmware, the nb4 can only have the settings in the menu.

Hi I just wanted to ask how do you set it up for the regular nb4 I have tried and can't get it to work

@WTFRCCars

Жыл бұрын

It has to be on 2.0.100 firmware but you can't assign the controls to button or dials you have to set it up in the SVC menu only

@rcsinisterdragracing5981

Жыл бұрын

@@WTFRCCars so which one is the one I need I'm a little bit lost

@rcsinisterdragracing5981

Жыл бұрын

@@WTFRCCars it's a new update v3.0.4

@rcsinisterdragracing5981

Жыл бұрын

@@WTFRCCars because I did the 2.0.100

@WTFRCCars

Жыл бұрын

So the nb4 needs to be on 2.0.100, assistant v3 is version 3.0.4 the receiver will bind to the nb4 on version 2.0.100 but you can't assign controls of the SVC functions to any buttons or dials the noble pro is the only transmitter that can do that the nb4 can't on any firmware.

Will the regular NB4 work with this new INR4 receiver? As i'm looking through the NB4 settings and don't see any gyro related items.

@WTFRCCars

2 жыл бұрын

Yep works fine you have to have 2.0.93 or newer firmware installed though on the nb4 :)

@maxsweet

2 жыл бұрын

I'm running one and it works fine w/ my NB4. You have to go the SVC menu to access the settings once paried. But atm, can't assign any SVC functions to any buttons. I hope that will get fixed in the next firmware update.

@WTFRCCars

2 жыл бұрын

Yeh I'm guessing a firmware update will be released.

@cas5950

2 жыл бұрын

@@WTFRCCars got mine on the way, is heading lock more like a drift setting?

@WTFRCCars

2 жыл бұрын

It's more like it tries to keep the RC in the direction of the wheels not the direction it was going in :)

Does all of that the same for NB4 version not the Pro?

@WTFRCCars

Жыл бұрын

Nb4 can't assign any of the settings to any buttons but all works the same :)

@AhmedTaha-kd2sm

Жыл бұрын

@@WTFRCCars Can you please make us a video in NB4 and SVC - I like your videos and thanks for all what we learn from you

@WTFRCCars

Жыл бұрын

It just works the same as any other receiver but with SVC option but if I get time I'll make one for you :)

Ciao amico mio quale versione mi consigli di acquistare ormai che uno fa l’acquisto? Versione pro o base? Ciao e saluti dall’Italia

@WTFRCCars

2 жыл бұрын

Dipende molto, se hai bisogno delle etichette dei canali, 18ch e 3 stadi dell'acceleratore, allora deve essere il professionista, ma l'nb4 è comunque un trasmettitore fantastico se non hai bisogno delle funzionalità extra :)

@leonhardware

2 жыл бұрын

@@WTFRCCars nello specifico quali sono le differenze? Io lo userei per rc rally 1/10, formula e tamiya e vrc pro e magari in futuro per uno scaler. Grazie amico mio per il supporto

@WTFRCCars

2 жыл бұрын

Le differenze principali sono che il professionista può avere etichette di canale in modo da poter avere luce accesa/spenta, differenziale bloccato/diff aperto sullo schermo non solo la posizione del servo, anche 18 canali non 8 canali, la ricarica wireless viene fornita con custodia per il trasporto e dimensioni diverse ruote, trigger di diverse dimensioni, modalità a latenza ultra bassa a 2 canali.

Can this switch setup be done on the NB4 or does it only work on the pro?

@WTFRCCars

Жыл бұрын

Only the pro can assign the menu options to the buttons on current firmware

@lawrenceashby4719

Жыл бұрын

@@WTFRCCars thanks for the reply, do you know if flysky will do an update for the NB4 that will enable the switch use for the menu or will I have to upgrade to the PRO 😂

@WTFRCCars

Жыл бұрын

They haven't told me of anything planned for the nb4 so far

@lawrenceashby4719

Жыл бұрын

@@WTFRCCars thanks for the help, one last thing, can the INR4 GYB be updated from the NB4 ?

@WTFRCCars

Жыл бұрын

Ya don't need to and ya can always update it from pc if needed

what is I-bus protocol

@WTFRCCars

Жыл бұрын

It's what you need to connect i-bus device like I bus servos or a 4 ch add on to one port

In SVC Mode ~ if i turn Priority to 100% dose that mean I have 100% Priority or the gyro has 100% Priority??

@WTFRCCars

Жыл бұрын

0 wiil prioritise keeping the vehicle from loosing grip so bigger turning circle, 100 will prioritise what you are doing so tighter turning radius but less stable :)

@MarcusHicksK.O.C

Жыл бұрын

@@WTFRCCars I Do Speed Runs So Im Just Trying To Go Perfectly Straight ~ So 0% Would Be Best For My Situation??

@WTFRCCars

Жыл бұрын

Yeh your going to need a really fast servo so the gyro can keep the RC straight on speed runs though something like the theta 1000hz servos

@MarcusHicksK.O.C

Жыл бұрын

@@WTFRCCars do you have a email or facebook page?

@WTFRCCars

Жыл бұрын

Yeh I have the Facebook group wtfrccars :) it's the QR code on most of my newer vids :)

Is this actually available? I can't find it anywhere.

@WTFRCCars

Жыл бұрын

I know a few guys got them from Amazon

@toxicnerveYT

Жыл бұрын

@@WTFRCCars Straight up can't find that model anywhere. It's not even listed on the Flysky website.

@WTFRCCars

Жыл бұрын

www.ebay.co.uk/itm/394192685155?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=izhgzng2que&sssrc=2349624&ssuid=-9Xy4QzCS96&var=&widget_ver=artemis&media=COPY but over priced

@WTFRCCars

Жыл бұрын

hobbymatehobby.com/products/flysky-rc-noble-nb4-gyro-receiver-4-channels-inr4-gyb-for-flysky-nb4-noble-lite-noble-pro-radio-transmitter-afhds-3?_pos=2&_sid=e9b14fb8f&_ss=r this is the correct price

@toxicnerveYT

Жыл бұрын

@@WTFRCCars So, I finally got one of these receivers to use with my NB4, binds up all good. However, I don't get any of the SVC options in the assignment menu. Any ideas?

Hello, where can I buy it? Even on the off site there is nothing about him.🤔

@WTFRCCars

2 жыл бұрын

I've seen it available on USA Amazon

@lFarmazonl

2 жыл бұрын

@@WTFRCCars Strange, this receiver is not listed on the off site ...

@WTFRCCars

2 жыл бұрын

I don't think it's officially released yet