The stickers without a cut out for the switch are for if you want to remove switches, for instance if you don't use the switch only the dial, take the switches out to make the transmitter more sleek, less likely to snag and break a switch. That way later if you want to use the switch, they are not broken.

You're so smooth at flying. Great skills and thank you for the info Andy!

Thanks for this, Andy. I'm completely new to all this and have this coming with my wizard soon. This video will help me out!

glad u did the flysky version. and i agree thats where all the beginners start and you did a good job of being considerate to those who use this affordable radio. not all beginners will end up with the top brands bec of better real life priorities and FPV is just one of the hobbies people try their skill on.

Good review as always thanks AndyRC stunning stunning flying display !

Yay thank you Andy! I'm just getting into the hobby and ordered an i6x. I bought the qx 95 because of your videos (and a few others as well). I can't wait to fly it around with the Flysky. I eventually want to get a Wizard after learning more about beta flight etc. and acro mode :D Your videos tailor to me perfectly, cheers!

@AndyRCchannel

7 жыл бұрын

great thanks for watching the wizard should be coming up soon

Oh wow! Your flying skills are sooooo good! 🤯

Thanks so much for all your great reviews :) I really do appreciate everything you do

Thanks for the video. I'm so glad I'm getting into this hobby with KZread available. I'm not sure how anyone figured out everything before KZread.

@AndyRCchannel

7 жыл бұрын

yes it was hard. mostly forums like rcgroups.

Just got mine yesterday. seems good so far

Super helpful video, just bought the exact same setup. Many thanks!

Wow.. 10 videos before Some1 finally mention I-bus!!! its speed from controller to the receiver.. thanks sooo much ! makes choice easier to buy the i6X

Great video Andy! Looking forward to your next video. I have a wizard in the mail!

@AndyRCchannel

7 жыл бұрын

great u will like it

whoo, old skool Andy, getting one of these radio's for Christmas, mainly because my deal with my mate mechanic (I build him a quad, he fixes my car at cost) is getting difficult as he brought a mavik, and a spark. He starting to feel restricted and I gave him my old Diatone? 3" frame in the spring to get him back in the real world. He's got an old turnigy radio running DSM2, and I just can't get the receivers to work anymore (they can't all be broken!) anyway, I'll give him the fs i6, so at least I can get him back in the air, without every move he makes been sent back to DJI. And race him. I also don't really need anything realistic for Christmas! Came here for a bit of advice on what I was in for, and I have to say you've chilled out a lot since this review, i'll have to watch it again at half speed, or with less beer in me. I'm sure I speak for many when I say your reviews are always useful and honest and I'd like to thank you for all your hard work, I've never given you a bean, but you still help me out at least once a month. Maybe time to contribute. This review was a bit of a shock, as I'm used to your confident and relaxed style of more recent stuff, Again Andy, thanks and merry Christmas.

I have the older FSi6 transmitter paired with FSiA6B receiver and I cannot fault it, I've done the 10 channel firmware update so I can have flight modes on one switch arming on another and air mode on another. I would highly recommend it to anyone. Nice review Andy

@AndyRCchannel

7 жыл бұрын

yep its a good one thanks!

Thanks to you, good man, you helped me fix the settings of my quad and that's why I thank you very much👍

@dbproductions6656

4 жыл бұрын

hi does ibus work with sbus

nice video Andy looking forward to your next video

@AndyRCchannel

7 жыл бұрын

Thanks Billy!

Great skills dude👍🇬🇧

Nice Transmitter, have one too. The Range is very very good. I saw a review that shows the Transmitter Processor is the same as in the taranis x9d.

well, I must say that, as an ex aerobatic RC pilot (AMA Class D pattern & FAI pattern) I was impressed with your aircraft flight skills. I recently acquired a Flysky TX (along with the Ideafly 210) via a YT channel "give away contest". Looks like the adapter cable and simulator would be fun. It's been many DECADES since I flew RC pattern aircraft .. perhaps before you were born, but I think I could still manage a bit of fun. Used to fly Mode 1 for aerobatics, but now my TXs (Flysky & Taranis) are both setup for Mode 2, so there would be some 'retraining" involved. I'll have to see if BG offers that setup via their US warehouse. Cheers.

@AndyRCchannel

7 жыл бұрын

id stick to mode 1. been flying mode 1 for 25 years so only go to mode 2 when i have to. cheers

Can't wait for that Wizard review

@AndyRCchannel

7 жыл бұрын

Thanks ill have it up soon as i can cheers

Thanks for the review! Great 3d fixed wing flying skills :) How do you find the reliability of the I6X radio link?

Is it possible to swap the pots for 3 or 6 position knobs? That would be awesome for Naza FCs!

Good review, im going to grab this radio right away 😃😀

Nice 3D skills :-) I know what you mean about planes. I can hang 10 quads on a wall where I previously have one plane. But it's so nice when you do get out and fly LOS.

@AndyRCchannel

7 жыл бұрын

I agree, nothing better than flying a big plane los. cheers

It's so good my friend 👍 I love this hobby, and thank you for chare your experience. 👌👌👌👌👌😊🤗 I subbed your channel 👉✌️

you are the man to ask, How can I run the SmartPropoPlus software on my mac

Perfect timing. I just bought this

@AndyRCchannel

7 жыл бұрын

great enjoy :)

@Frogzy

7 жыл бұрын

B33SON Hohmies Mcfly Santez Morrow so I bind my x6b receiver with my I6X TX and sometimes the RX voltage is disappears from my TX and then shows again screen pls help me did I made the bind not properly?

excellent video buddy very informative 👍👍

@AndyRCchannel

7 жыл бұрын

Thanks a lot Tony cheers

So pleased I have this on order along with a tiny 117. Would I also need the cable you have in this video if I want to try the DRL simulator you posted recently? Ta

@AndyRCchannel

7 жыл бұрын

yep u will need the cable for drl cheers

Have you got the WLtoys V383 yet Andy? I guess that's what you were alluding to? I'd love to see you flying that.

How to connect its reciever to a drone?

great video.. God Bless

Hi Andy could you tell me if the i6 throttle stick can do both sprung center like altitude hold and normal up and down ?

If you update the firmware you can use it as a usb controller without the special connector

Dude. I got a gt2 200x and couldn’t figure this out for a year!

andy could you do a tutorial on how to activate realflight in 22 in 1 simulator? tanx

AndyRC hiya Andy can i connect this X6B to the uart3 next to the usb on the sp racing f3 fc to run ibus i tried using io1 & serial rx with ibus all the channels were there in receiver in betaflight but iv no control or movement on the sticks and channels any idea,s Andy it seems so easy on the video,s for the X6B

If anybody say Taranis is an expensive radio should check out futaba graupner and other high end radios. Taranis is a cheap but versatile radio.

@AndyRCchannel

7 жыл бұрын

agreed

@babakzekibi315

7 жыл бұрын

Ofcourse it is not as low cost as some other radios :)

@EleanorPeterson

5 жыл бұрын

Ah, let them eat cake...

This FS-I6X has the ability to transmit 10 channels. You have to enable it in the controller though using menu>system>Aux Switches. You then can turn on all switches and set the channels to 10

@AndyRCchannel

7 жыл бұрын

yep thats shown in the video

how do you upgrade firmware on the older version, the FS I6? Thnaks

Does fly sky make a radio that could be used for rc trucks and could this one in your video do trucks. Thank you for this video, very informative. Take care bud.

HI will the X6B fit and work ok in the Diatone 2019 GT R349

did that simulator in the video come with the 22 in 1 simulator cable?

Hello Andy: Have a question for you that you may help me with???? I'm new to fpv and my wife surprised me with a Eachine Wizard X220 FPV Racer Blheli_S F3 6DOF 5.8G 48CH 200MW 700TVL Camera w/ FlySky I6 RTF and of course there are no instructions that came with it and I have no idea how all this is supposed to work. Now I got to the point where I got the fpv and my googles to work and I was able to pair the receiver with the drone but I can't get the motors to start. So I did some more research on you tube and down loaded Beta Flight and connected the drone with my computer to check out the operation. Well when I tabbed down to the receiver tab and it opened there is no info. According to other posts there are different color horozonal bars that show up to correspond with the different radio controls and would move when you would move each control. Well on my system there are no color bar and no movement when moving the controls. I can't find any instruction on how to go about checking what would cause this problem? So is there any instruction you could give me on how to go about and what to check so I can make the controls work, I think if I can figure this problem out this will fix the problem of the motors not wanting to ture on?. I hope I explained and made sense on my problem. Thanks for your help I watch your channel all the time and have learned a lot so thanks again. John

Hi Andy. I am building my first quad - the F450 Flamewheel with Naza Lite. I bought this transmitter after your review but am struggling to find any detailed info on how to connect it to the Naza. Could you point me in the right direction, please? Kev.

Hi ya I think I’ve not bound my receiver on the right model as I bound it first what would you recommend ?

when I connect my motor to receiver, the max speed of motor is reached when the throttle stick reaches 50percent. how should I set up my transmitter. fs i6x is my transmitter

Hey andy can you help me, what do I need to do or setup If I want to connect x6b receiver to my eachine x220hv. Which is both new and still on factory setting. Please lmk. 😆

Impressive sim flight... I've never flown a plane perhaps I should try it out in the sim

@Ottivad

7 жыл бұрын

haha you do not need a sim :D you have always good weather :P

@RCFlyer85

7 жыл бұрын

Lordxv For the most part yes lol but.... I have no planes at all

@AndyRCchannel

7 жыл бұрын

u definately need to try ;)

@Ottivad

7 жыл бұрын

AndyRC it would be nice to See the Channel Patch for the FS t6 from flysky .

The usb Does work for pc gaming just a heads up

Friend, do you know if the IRangeX FS-i6 i6x iRX6 connects with k120 or k110 that uses protocol futaba s-fhss

can I bind this transmitter to I bus receiver without using flight controller and bind using esc and battery

Hi Andy I know it's an old vid so don't expect you to see but have you seen the flysky fs I6s ? Was wondering if I could get your thoughts ? Cheers.

Where can i get one of those pins to connect the cable from my flight controller to the same cable the comes with the receiver. My drone is a ready built one too and already has that type of cable coming from it.The pin that you got from an old flight controller. what are they called so i can buy one. hope you can help please and thanks

Would be awesome to see a range test.

@AndyRCchannel

7 жыл бұрын

i dont have the space sadly :(

I wish you could walk us through the connection and use of the simulator with the Flysky transmitters that I am sure that we all have (with some model)

@AndyRCchannel

7 жыл бұрын

theres no need for a walk through. u plug it into the pc and its ready to go.

@MEGIDD0

7 жыл бұрын

Andy, which setting do you have the selector switch set on? on for the USB dongle. 1, 2, 3, or 4? IDK why, but I'm having hell getting my i6x to work properly on PC.

followed everything, not working, if i move the cable going into the middle port to the far end of thereceieve, i seem to get movement on cleanflight but nothing on the quad itself, im almost ready to sell this thing with all the head aches ive had with it.

Great, just ordered one, bad news it's on back order. Have you thought of doing a review on 7"HD 5.8G screens. Mike

@AndyRCchannel

7 жыл бұрын

usually they ship pretty quickly :)

@mike1117777

7 жыл бұрын

Fingers crossed

@mike1117777

7 жыл бұрын

Look what arrived this morning. Problem is the boss lady wants me to go to Padstow, Dam. Mike _lh3.googleusercontent.com/RhiJZt83IiQ2qQ1r5cG2gk-0x9iZUgCjPKqGcjL7vG0sfTFFdPvgHCX1sUhRfSpj4ePjGJPJ6g_

how about building a airplay that you would fly or a kit

Hay man ,I subscribed .I was wondering is this the only rx flysky has that has any sort of telymetry?Is there any that are better?

I have this receiver, but ever since a crash I cannot bind the receiver back to the transmitter

I bought this transmitter recently and when I updated the firmware version did not change.so what should I do .which firmware version is ur transmitter.

which is best receiver between x6b and i10 receiver for this transmitter

Which firmware have u updated to this tx. I am not able to find any new firmware to this tx. Plz inform if there is a new firmware.

hey how can use the x6B receiver with PWM for a rc plane and other

I'm using this receiver with FS-I6 (10ch modded) and everything seems fine I even get battery voltage on the FS-I6 but when I set the alarm on the transmitter RX Battery that I have 4 cells, Low = 13.9V Alarm= 14.0V, High=16.4V (27:39) even when my battery is 15.2 I get the alarm still buzzing. I have to change to 1 cell lipo then it stops. Any help?

Which receptors are compatibles with IRangeX i6X Transmitter ?

Could you please elaborate on the cables used for using the transmitter as a simulator control unit. What are these, where can one get them, etc.

@johnybrave2350

6 жыл бұрын

Alright. I did some research and have learned the answers to my questions. But what I am actually interested in is if these cables can be used with third party simulator soft, e.g. X-Plane 10, or only with the setup supplied with the cables?

Is the Flysky FS-i6X compatible with any receivers with gyro?

great video is the 3d quadcopter coming to the channel gona be the xk x252??

@AndyRCchannel

7 жыл бұрын

i have already reviewed that one :)

yes do more vidéos on planes ;)

Good video Andy, will it work with a Drone with a FlySky reciver? (eachine qx90C) Thanks

@inventormarti

7 жыл бұрын

iñigo Romero Moreno it will

Is this receiver - transmitter setup good for 3 inch quad

@VijitChandna

4 жыл бұрын

Honestly this would take a lot of space. It would be difficult to fix this in a 3 inch quad

I have flysky fli14+ but not binding..when i click bind key on remote then power it says "key stuck".

Andy, I currently have the FS-i6X and I have the ARF Wizard on order. I see that you had to add a set of male pins from another flight controller in order to connect the flight controller wire to the i-Bus wire on the X6B receiver. Will I need to get one of these male pins in order to connect the two together? Thanks

@AndyRCchannel

7 жыл бұрын

yes you will or you can take a female connector and make up your own lead.

You can have the same functions on the i6 with a firmware upgrade (with the exception of adding another 3 position switch... but do you really need two? :) )

@AndyRCchannel

7 жыл бұрын

nah i only use the one

Looking to buy this transmitter so my girlfriend can fly too! Cheap and affordable. Thanks for the video!

@AndyRCchannel

7 жыл бұрын

she will like it cheers

looking for a transmitter for the Eachine Wizard iv ordered which one would you recommend this one you are reviewing or the Flysky FS-i6S 2.4G 10CH AFHDS Transmitter With FS-iA6B Receiver or the Turnigy Evolution just not sure which one to go for. thanks Andy in advance

@AndyRCchannel

7 жыл бұрын

i prefer this one myself

i'm new to this...how do i bind my fs-i6x to a frsky l9r....please

Great video! I've bought like a week ago more or less haha, I've a question, Have you tried the voltage sensor? Haw acurate is? And I just need to solder the red and black wire in the lipo place or the yellow one it's used for something? Thx!

@AndyRCchannel

7 жыл бұрын

I have not tried it myself as when the goggles are on you cant read the tx display anyway but yes just the red and black to your positive and negative of your battery or pdb

@BelloDDC

7 жыл бұрын

You can set up on the menu a beep on certain voltage

How can I connect servo to 5th and 6th channel.its not working for me

I'm looking for a low cost radio to get into all the BNF FPV micro's and whoop's. Is this the way to go for those little guys?

@AndyRCchannel

7 жыл бұрын

yes it should work with most just make sure u buy the flysky version of bnf

Is it compatible with FS iA10? Thanks! P.S. Awesome video. It was really helpful!

Flysky is compatible with Realflight? What about Taranis?

Being interested in this transmitter myself I am looking for videos discussing it. One thing that caught my attention was you said to activate all 10 channels you have to "hack the firmware". Are you sure about that? At least the current version of firmware as of this post its there already however it defaults to 6 and you have to enable the other 4 channels and set them to the IO you want (switches/dials).

@AndyRCchannel

7 жыл бұрын

+Steve Jones no in order to get ten channels from the i6 you have to hack the firmware..this is the i6x

Kindly how to connect the voltage sensor to pixhawk?

can it work on an rc plane? or drones only?

I can you this with airplanes and helicopters as well?

Andy will the FS-IA6B rx. work with this tx.?

@AndyRCchannel

7 жыл бұрын

yes it will cheers

hi Andy, great video. I have a question: if I want to bind different quads with the same transmitter, do I just need to select different model for each quad and bind them accordingly? I have a flysky i6 and was wondering that. thank you and cheers.

@AndyRCchannel

7 жыл бұрын

yes thats what i do just name the models on a different memory and load them up when i want to. it will keep the bins

@mamariomiamo5596

7 жыл бұрын

AndyRC alright, thank you for the reply. will follow when I get new quads. have a nice day :)

@AndyRCchannel

7 жыл бұрын

Zhengtian Ma great you too!

can I use this transmaitter and receiver with my blade 130s rc helicopter

Waittt, your a Mode1 flyer!?!

Can the receiver can run on 6s you said only 4s can it run on 6s what happened if I run on 6s that receiver please reply it will mean the world to me please

Hello AndyRC, Can i use this with eachine qx micro series & DRL Simulator?

@AndyRCchannel

7 жыл бұрын

yes you can. u need the usb dongle in the description to use the sim though

hi man, I have one of these and have been well frustrated with it. Any idea how to bind it on to an eachine 010s I would be so grateful.. also I still cant get it to work with my computer for simulations- which one have you tried ? many thanks

@brianemery8945

6 жыл бұрын

davenickname u need to purchase the multi protocol module irange irx6 and then u can use ANY chinese quad with your controller

I never knew you were a mode 1 weirdo! ;-)

Hello Andy. Very nice video. Whats name of this simulator? Tks

the original cable can be used with digitalradio, with not much to setup and used as a game controller :)

@lm95322ms

7 жыл бұрын

Could you run through the steps you did? I can't get it to recognize the controller

@skypeon1

7 жыл бұрын

Lucas M i dont remember the steps,sorry :(

Help Andy. I've bought this to practice on simulators. I bought the special USB cable but can't get any response on either my Win 10 laptop or my Mac. I've searched for help but can't find any solution. According to your vid you just plugged it in and it worked.

@AndyRCchannel

7 жыл бұрын

a usb cable wont work, that is for flashing the firmware only you need to buy the 22 in one simulator dongle cheers