Floating Vanity Installation | Wall Mount Strong
Learn how to install a Floating Vanity, why these are the best for securing your bathroom vanity safely to your wall. How to properly support a floating vanity, vessel sink + install a faucet. What screws to use, how to secure vanity to wall, how to add backing to your wall and add support for your wall hung vanity. Installation TIPS: how to attach floating vanity to wall, install a quartz countertop, solid surface countertop, install vessel sink + bathroom faucet installation + more.
Subscribe for more Tutorials: / darudhillon
Tools:
Silicone Bathroom Caulk: amzn.to/3hgPUwg
Impact Driver: amzn.to/3VL0N8B
Sink: amzn.to/3hgPUwg
Faucet: amzn.to/3BlYu3R
White drain: amzn.to/3FDPLMW
GRK 6" structural screws: amzn.to/3BoFy4z
**structural screws or lag bolts can be purchased at your local hardware store for $1.30 each approx. They are expensive on Amazon I used 4 x5" for this 48" vanity
Amazon Affiliate Links. As an Amazon Associate, I earn from qualifying purchases. Thanks for supporting my channel
VIDEOS YOU MAY LIKE:
Toilet Replacement: How to Install a Water Efficient Toilet: • How To Replace a Toile...
IKEA Laminate Countertop Installation: • IKEA Countertops Insta...
Subscribe for more Tutorials: / darudhillon
Connect on Social:
/ darudhillon
/ darudhillon
/ darudhillon
www.tiktok.com...
QUESTION: Have a question about installing your floating vanity, renovating or anything else? Post in the comment section of this video. A comment is greatly appreciated, it lets KZread know you find this video helpful.
TimeStamps:
00:00 - 00:15 Tools You Need Intro
00:17 - 00:56 Install backing for floating vanity
00:56 - 1:40 add support for floating vanity, base of cabinet
1:42 -1:48 trick to easy floating vanity install, make a stand
1:49 - 2:17 mounting floating vanity
2:18 - 3:52 installing floating vanity
3:54 - 5:06 Countertop install: quartz
5:12 - 8:08 Faucet install: tall faucet for vessel sink
8:24 - 10:34 Vessel Sink Install
#floatingvanity #bathroom remodel #vanityinstall
About: How to install a floating vanity DIY floating vanity installation, how to install a bathroom vanity, strong and sturdy floating vanity installation. White oak modern bathroom vanity, modern vanity. Vessel sink installation, how to install a faucet for a vessel sink. White bathroom drain, tall faucet installation, bathroom countertop installation, modern bathroom ideas, minimalist bathroom ideas, how to secure a countertop to a vanity. How to install a bathroom faucet. Minimalist bathroom ideas, Bathroom vanity ideas for DIY, bathroom remodel ideas, bathroom trends. Bathroom vanity ideas, bathroom trends 2023, cb2, crate and barrel, solid surface countertop installation. Bathroom remodel ideas.
Пікірлер: 67
I came to KZread to fix my Garage door, little did I know I would fall in love...😂😘🇬🇧
@DaruDhillon
5 ай бұрын
Welcome! ❤️ to you in 🇬🇧
I'm no stranger to construction or DIY videos, but, I am learning sooooo much useful information from watching your channel. Thank you for being so clear and detailed, and for sharing helpful tips in every video. 🏆
@DaruDhillon
Жыл бұрын
So kind of you to say Kathrine! I enjoy learning and sharing what makes my job easier and better. It’s a pleasure and I appreciate the support. Also love to see so many women doing DIY projects like you! 👏🏽
It makes sense to use structural screws for the weight of your vanity fair , great tips appreciate your helpful installation.
@DaruDhillon
8 ай бұрын
Thanks Richard!
Perfect video!! Subscribed exactly what I needed. Love the base to have it sit on and blocking between the studs 👍🏻
@DaruDhillon
9 ай бұрын
Thanks David! Vancouver is beautiful. I’m originally from Victoria.
Such great detail Daru... easy to follow, step by step. Thank you!
@DaruDhillon
Жыл бұрын
Fantastic Donna, thanks! Happy to help. 👍🏽
I quite enjoyed this! Easy instructions & short & to the point. Thank you! We will be installing a floating vanity when we remodel ours.
@DaruDhillon
Жыл бұрын
Thanks Holly! It’s not a hard project and totally worth it. Good luck! 👏🏽
Absolutely Beautiful, smart and talented young lady.
@DaruDhillon
2 ай бұрын
Thanks 😊
Are you telling me only 2 screws are holding that vanity up? that's amazing!! great video. girl power. :)
@eltonnoway7864
Жыл бұрын
Not technically. The 2 screws prevent the vanity from pulling away from the wall... it's the 2x4 she attached to the wall studs starting at 1:17 that is supporting the most of the weight.
Great video. I'm in the process of hanging a floating vanity and I just discovered a bow in my wall and its not straight. Any suggestions on what i do with the gap. It looks like the gap is least 2 inches on one side
@DaruDhillon
3 ай бұрын
If a wall is bowed you would typically shim the wall or add furring strips. For a 2” gap make sure you add that length to your screw(s) so it’s properly secured to your studs. Thanks for the question! These situations come up. Good job ahead!
Thank you and this is a great idea to install floating vanity. Do you need to remove the supporting stud beneath after installation? Or just keep it there?
@DaruDhillon
4 ай бұрын
Hi, this vanity manufacturer requires plywood beneath the vanity to help support it. I beefed it up to a 2x4 because it’s really heavy. It stays there and it isn’t seen. Thanks!
Hello - can you share the source for those mounting brackets, please? Thank you!
Just discovered your channel and I'm hooked! If this vanity was not square, would you have used shims or how would you level it out? Thanks and keep up the good work!
@DaruDhillon
Жыл бұрын
You got it! Shim the back or side to make it level or plumb. Welcome and thanks! :)
I am needing to install new cabinets in a small powder bath and love the tone and style of the wood. I’m in the states, what should I search for when I’m looking for something similar?
@DaruDhillon
7 ай бұрын
Thanks Danielle! I love the look of this vanity too. It’s warm and calm. This cabinet is made of white oak. You should be able to find something in a similar tone in your area or online. Good luck, hope you find something you love.
Never use longer than 2.5 screws. Pipes and electric are usually in the center of the 2 x 4 , longer than 2.5 screw are more likely to hit and what a surprise...
@DaruDhillon
Жыл бұрын
Hi Sam, your recommendation is a good one to prevent damage. For a really heavy vanity like this I have to use structural screws or lag bolts. It’s required by the manufacturer. I also opened up the drywall for added blocking and to see where my screws would line up. 👍🏽
if your going to cut the wall open you may as well install in wall steel brackets
@DaruDhillon
Жыл бұрын
Thanks for the tip! You could definitely do that too. 💪🏽 In this one I’m following the manufacturers installation instructions which calls for lateral blocking or studs. 👍🏽
Where did you purchase the vanity? Love the look and style
@DaruDhillon
Жыл бұрын
Thanks Brett, I love it too! I’m in Toronto it was made here in Canada.
Beautiful job!
@DaruDhillon
Жыл бұрын
Thank you!
You don’t miss a trick.
@DaruDhillon
3 ай бұрын
Thanks!
Flush the water lines before you hook up to the faucet.
What about installing and connecting the sink to the PVC drain pipe?
@DaruDhillon
8 ай бұрын
Great suggestion. I haven’t made one yet but will keep that in mind for the future. Thanks!
On more question.. if I have metal studs, what's the best solution? Should I open the wall up and put in a few wood studs tied to the metal studs? Or is there another solution to just tie directly into the metal studs?
@DaruDhillon
4 ай бұрын
If you can tie into your studs that’s a good solution. If not you can add lateral blocking. This vanity manufacturer requires lateral blocking because it’s really heavy. Also I used 4 structural screws to mount it.
@samalldredge3536
4 ай бұрын
@@DaruDhillon ok great, I think I'll add some lateral blocking. My vanity is probably about a third of the size of yours, and I may as well make sure it's secure 🙌 Thanks again!
@DaruDhillon
4 ай бұрын
@@samalldredge3536 my pleasure Sam. I often opt to beef things up so I know it’s good. Good luck. Glad you’re doing it yourself!
How many inches off the fround was this
That's easy. 🙂👏👏👏👏
@DaruDhillon
Жыл бұрын
Thanks Tas! It’s a good project to DIY. 👍🏽
what type of corner brackets did you use?
@DaruDhillon
7 ай бұрын
These corner brackets came with the vanity. The vanity is really heavy so I used 4 screws to mount the unit. They are similar to the corner brackets used at IKEA for their vanities or kitchen cabinets.
Hey lovely girl.. quick question.. What's the total height from the top of the vanity until the floor? Xooooo
@DaruDhillon
Жыл бұрын
Hi, This vanity was installed at 34 1/2 from the floor. The countertop sits above that. Hope that helps!
@samalldredge3536
4 ай бұрын
This video is so useful 🙌 I was about to buy metal brackets to install my floating shelf and didn't know how high to hang it. Thank you 🙏
2 words: French Cleat
@DaruDhillon
Жыл бұрын
You can use a French cleat but for this vanity I’m following the manufacturer’s instructions. I would recommend you do the same. 👍🏽
Maybe this is just a coincidence, but not unlike a structural screw, i've also been described as round, big and designed for maximum holding...just saying
I always believe a guy helps with the prep and then the ladies come behind them to say they did all the work.
@DaruDhillon
9 ай бұрын
Women can accomplish anything a man can. I don’t have time to wait around for a man. Help yourself. Stay motivated, practice and learn from your mistakes. Anything is possible if you believe in yourself.
Where did you get the brackets? I have looked everywhere.
@DaruDhillon
Жыл бұрын
Hi Chris, these brackets came with the vanity. Some vanity manufacturers will have them built-in. For solid wood or plywood units. I searched for something similar to recommend but I couldn't find them.
@chrisgoble4620
Жыл бұрын
@@DaruDhillon Thank you for letting me know! Keep up the great work!
@DaruDhillon
Жыл бұрын
@@chrisgoble4620 Ah thanks, Chris
Nope, I don’t like seeing that “strengthening” 2x4 at the bottom side! Did I miss something?
@DaruDhillon
Жыл бұрын
Having a bottom support is required by the vanity manufacturer. A plywood base support was included with the vanity but I beefed it up with a 2x4. Having a bottom support is common in vanity installations and many cabinet manufacturers will want it installed or you will void your warranty. Is there a reason why you don't like having a base support?
Using bed connecting hardware! LOL!
@DaruDhillon
Жыл бұрын
I’m using structural screws which are commonly used in construction in place of lag bolts. You’ll see them used on decks to fasten ledger boards and in other structural framing in larger sizes. You must have a really sturdy bed! 💪🏽🛏️
Thanks for watching and supporting my channel. Will you be installing your own vanity? 👏 Watch Next: How To Install a Water Efficient Toilet: kzread.info/dash/bejne/qo2ArZednsTSoda3.html Exhaust Fan Replacement: kzread.info/dash/bejne/m6Gi1cmeeMbUYLQ.html
your thew best , will you marry me ?
Rubber goes first…..dang girl!!!
@DaruDhillon
Жыл бұрын
At least you won’t forget.