Flipper Zero WiFi Dev Board: IRL WatchDogs! How to Install Marauder on WiFi Dev Board!! 😱 😱 😱 😱
Ойын-сауық
00:00 Intro
00:39 How to Use WiFi Card
01:40 Download Marauder Flasher from UberGuidoZ Repo
02:09 Plug in USB while Holding BOOT Button
02:45 Run Flipper Flasher Script
03:34 Download Marauder Flipper Zero App (By Cococode)
04:35 Run ESP32 WiFi Marauder Application on Flipper
06:32 Demonstrate a WiFi deauth attack
07:54 Demonstrate Rick Roll attack
09:30 Check out JustCallMeKoKo's Repo
09:48 Outro
Do you have a WiFi Dev Board for your Flipper Zero? Here I walk you through every step it takes to be able to hack security cameras just like in Watch Dogs!
DISCLAIMER: Never hack anything you don't own or have expressed permission. THIS MEANS YOU!
My Discord : / discord
JustCallMeKoKo's GitHub: github.com/justcallmekoko/ESP...
UberGuidoZ Repo: github.com/UberGuidoZ/Flipper
Uber's DownGit: uberguidoz.github.io/DownGit/...
Cococode's Flipper Zero Marauder Companion App Repo: github.com/0xchocolate/flippe...
-----------------------------------
Amazon List of All the Parts I Use: a.co/0ujD8M9
UberGuidoZ Repo: github.com/UberGuidoZ/Flipper
Uber's DownGit: uberguidoz.github.io/DownGit/...
I Am Jakoby's Channel: / iamjakoby
-----------------------------------
Check Out The Official Squachtopia Hangout Discord Server!:
/ discord
-----------------------------------
Try SquachWare Community Firmware! :
github.com/skizzophrenic/Squa...
-----------------------------------
Support the Channel at my Patreon!!
www.patreon.com/user?u=29290751
-----------------------------------
Follow me on Social Media!
TikTok : / talkingsasquach
Instagram : / talking_sasquach
-----------------------------------
Help Support my Content At Amazon!: www.amazon.com/hz/wishlist/ls...
-----------------------------------
Thank You SO MUCH For I am Jakoby for the intro, definitely hit up his channel and be sure to subscribe!!!
/ iamjakoby
-----------------------------------
Пікірлер: 259
Thanks for filling the holes my "amazing" content left behind. I think it might be time to do an update video on my end.
@TalkingSasquach
Жыл бұрын
Thats how I learned how to use it in the first place! I left this video relatively beginner status. I'll come back and and do a full feature tutorial once I go over a basic ESP32 Flipper add-on build.
@lcrince
Жыл бұрын
Huge fan Koko! Love your humor and project. Thanks for your contributions to the flipper community!
@LifeinWV
Жыл бұрын
@@TalkingSasquach thanks for leaving it up
I bought a Flipper about two months ago and have been scouring the interwebs for resources to learn how to use the device to its full potential (I’ve always wanted to learn about these kinds of things and was informed this would be a fun way to do so) and your videos get pointed to a lot by folks so here I am. Enjoying the content so far. 🧐👍
Great edit!Very informative and well put together. Keep up the content
@TalkingSasquach
Жыл бұрын
Thanks!
Hilarious!!! Love that you added in the part where you go fishing for the box XD Good vid. Thanks for the laughs and info.
OK I love your little graphics they help me learn a little bit and I literally paused and said “damn that’s a good boot that’s a really good boot”
Definitely amazing content I need 3 videos a week this was educational and encourages me to learn more about this field and you seem to be the man !!
@TalkingSasquach
Жыл бұрын
I'm aiming two KZread videos and at least one original TikTok every week! Make sure to subscribe and turn on notifications! New camera and possibly new mic this weekend!
@davelikesfood92
Жыл бұрын
830ish 7o
@zarth9234
Жыл бұрын
same this vid was very educational for me and now i want to use my flipper ever more
i am getting a flipper zero this week and can't wait to use your firmware!! thanks for taking the pain out of getting these running well!
My man. Whatever question I have for my flipper zero the frust thing I do is watch yours videos and there is the answer. Thanks alot for doing this and help the community 🙏 God bless you. Happy new year.
Great video man. Glad to see you
love ur editing and i love watching a youtube video that doesnt have terrible music that dosent fit the video. ur music was great
@TalkingSasquach
Жыл бұрын
Thank you so much!!
great video keep them coming!!!
Saved this to playlist to watch when my dev board comes!!!
@davidvideos1359
Жыл бұрын
I see you on every flipper zero video I watch lol
@EnderGameZ.
Жыл бұрын
@@davidvideos1359 I'm just strongly apart of the flipper community
Just got my FZ two days ago with the WiFi dev board. I downloaded the app on my iPhone and install marauder in two seconds via Bluetooth. So much easier now since the community has grown. But great step by step video.
Subbed, and my new favorite channel. Keep it up man, I just got mine for Christmas and your videos are a godsend! Merry Christmas to you and yours! Also, excellent use of memes, love it. Edit: Getting the message "Preload failed API version mismatch" Any ideas?
@TalkingSasquach
Жыл бұрын
That's usually when you have an application that's not been compiled for the version of firmware you're on. I think there was a recent update so it might take a day or two over the holidays if you got the file from Uber
@R3TURNZ3R0
Жыл бұрын
@@TalkingSasquach Oh okay that makes sense. I really appreciate the help sir.
Loving the vibe I’m getting from this, and I know shit all about computer engineering.
followed this vid but im getting api version miss match when i load the maurader on flipper. ive updated flipper to the lastest version 0.82.3
When I try to load the app I get a error preload failed API version mismatch, any ideas?
That’s exactly how I bought my wifi board. I saw it and said “yeah I’m probably going to need this” all while having no ideas beyond a deauthor. And I haven’t even used it yet, but this vid should motivate me.
@TalkingSasquach
Жыл бұрын
It's fun to play with!
@kill-em-deadairgunner
9 ай бұрын
Same here, got everything this weekend…maaaaan I ham having a lot of fun with this device… for me, the best thing about it is the evil portal features🤯🤫
Got mine today first flash went fine but didn’t execute so i reflashed and it works just fine. ive beaten the shit outta my devices for the last hour thankyou kind sir you deserve the sub
@TalkingSasquach
Жыл бұрын
I'm glad it worked for you!! Congrats!
Nice video! i got a question, the Esp2 wifi marauder that you install in the GPIO App is the same that comes when you install the roguesmaster firmware? So if i have already roguesmaster do i have to install Esp2 wifi marauder again?
So, you're a mechanic, making Flipper videos? I'd have said you were in tech all day long, and your presentation is excellent! Are you sure you're a mechanic? 😄
@TalkingSasquach
Жыл бұрын
I'm very sure lol
@dududjddjehdhdud-ui3yc
Жыл бұрын
You say that like mechanics are not technology savvy. Name a car that doesn't come packed with a shit cluster of mcu's et cetera
@YerBrwnDogAteMyRabit
Жыл бұрын
@@dududjddjehdhdud-ui3yc A Yugo. I could name 1000's. So could anyone.. Anything pre '96, and that's REALLY over-stating it, since OBD2 cars had a single ECU. Apples and oranges. I kinda doubt many mechanics are doing component level IC fixes or know MCU specifics like memory, proc, etc. AND computer diagnostics um, diagnose MCU issues. You're kinda out in left field there. By your logic, my being a network engineer makes me a mechanic too. Cool, thanks!
Quick question since wpa3 basically neutralizes any attempt at deauthentication attacks because of the signed key is there a way to just copy that sign key (by sniffing the packets of any clients connected to the access point) and replicate that in your deauthentication packets?
thanks for great guide, any idea why my Flipper running Roguemaster often keeps crashing while trying to run Marauder?
I'm coming here in June. Waiting on flipper & dev board next week
dude i need help!! ive bought the awok duo board v1with the wifi esp wroom 32 and the as01 on it but i cannot for thre life of me figure out how to flash it with maurader so i can use it. i have the flipper zero wifi dev board and had no problems flashing it.....what am i doing wrong??
My flipper does not show I have a GPIO folder. I tried to put it in my tools and when I run it it says “Preload failed. API version mismatch.” Does anyone know how to fix
@thelockpickinglebowski633
Жыл бұрын
Same here. Stuck at this point.
Lol i just randomly saw wren from corridor crew. nice
@TalkingSasquach
Жыл бұрын
I love those guys!
Great video, I'm a noob and have learned alot through yours and another content creator on here....got my sub forsure....also are your graphics available anywhere??
@TalkingSasquach
Жыл бұрын
What graphics are you looking for??
@xloscarlx
Жыл бұрын
@@TalkingSasquach the dbz graphics you had In the video the goku vs frieza
couldnt get it to even show up at first now its visible on the fz but i get api version mismatch'
Having a hard time downloading on Mac. The flash.bat is coming up as a word document. Can’t run in terminal. Any advice?
Missing GPIO Folder: My software is stock, but I just updated it right before playing this video. I do not see a GPIO folder in my PCs flipper program, but it does show on the actual flipper... About to do a master reset, thoughts?
Thank you so much ur a great help!! And i love ur censored buttcrack intro!!
Hi I was wonderning if you can do a more in detail analysis of the wifi board and what it is naturally capable and how to get it running and set up thank you for taking the time to make these videos and hope you have a wonderful day.
@TalkingSasquach
Жыл бұрын
Maybe in the future!
@kill-em-deadairgunner
9 ай бұрын
I’m 53 years old and somehow computer illiterate….all I did was look at a couple of videos on youtube specifically this guy, it’s shiny points for me is the evil portals! Let’s just say, an ex logged in & that’s how I got in🤫
Can you have multiple firmwares installed on the flipper zero at one time?
Just got my flipper today, noticed this video was a year old at this point, but every step lined up until the part where you go back to applications and click on stable version, that’s not offered anymore just a source older file.
Amazing video, do you think it's possible to transmit fm with a flipper?
I've been struggling with this for weeks, I tried installing it multiple ways but for some reason it never deoaths my network or any network, my network is 2.4ghz and its wpa-2 so idk why it's not working, maybe a faulty wifi board?
Nice intro
@TalkingSasquach
Жыл бұрын
Thank You!! It was made by I_am_Jakoby , definitely check out his channel, great guy with really interesting stuff!
if i don't have a pc, can i update the firmware and install maurader on the dev board from the ios flipper app?
Wow, you just uploaded a new video trying what I asked you in the previous video :), about using the WiFi tools with the original FZ Firmware. Was the app somewhat unstable that you couldn't use it? Because you had to install the unofficial one.
@TalkingSasquach
Жыл бұрын
So I don't really use OFW that much, so I'm not sure. The deauth attack obviously worked great, if you're hesitant to use CFW then I would try the dev build, might have better results.
@javiergarcia-cuervavelasco772
Жыл бұрын
@@TalkingSasquach Hi, I've flashed the WiFi board with Marauder and it was a successful installation. Copied the app in the Applications/GPIO and run it. But when scanning nothing appears. In the video did you use the dev build for the Original FZ Firmware? I've also tried the Deauther, but it crashs (null pointer). FM version 0.72.1 I've retried the installation and I get the same outcome. When I plugin the board a sequence of blue-green-red light appear. Is this the normal behaviour? Logs from the Marauder flash: .... Wrote 946800 bytes (639278 compressed) at 0x00010000 in 10.9 seconds (effective 697.6 kbit/s)... Hash of data verified. Leaving... Staying in bootloader. ----------------------------------------------------------------------------------------------- Process has completed Please disconnect your Wifi Devboard and connect it to your Flipper Zero.
Thanks for this it was really helpful, but a question I have is that if it is possible attack multiple cameras at once with this. I'm not doing it for anything bad just wondering.
@jakewastaken
9 ай бұрын
You sound super sketchy 😂 but I believe he didn’t target a device. He sent a general deauth for anything in range of the board that happened to be on that AP. You can specifically target a device instead of just anything on the AP though.
I have a bunch of esp32 boards from 3d printing projects. Is there a place I could get the pin outs and build my own boards? I use RM firmware.
@TalkingSasquach
Жыл бұрын
Check out Uberguidoz repo and click on the GPIO folder, he's got a bunch. Otherwise you can just Google it, they're pretty easy to find usually
Hey! I'm using a Mac to do all of this, but am getting the following error each time I try to flash Marauder on the the wi-fi dev board: "esptool.util.FatalError: Failed to connect to ESP32-S2: No serial data received." Even though it clearly previously connected to the board. i'm trying to follow the SkeletonMan03 steps. My Wi-Fi dev board's LED is red.. I wonder if that means something is wrong with it?
Is there a different module that does support 5ghz networks? Or other ways to make it work? Great vid 👌🏽
Does this board support 5GHz bandwidth even when scanning SSID's? I thought it was only 2.4GHz stuff that would show up. I mention this because you mentioned the two different SSID's of yours you showed in AP scan. Perhaps I misunderstood?
@TalkingSasquach
Жыл бұрын
Unfortunately there are no production ESP32s that support 5g yet
@Bricksauce_Engineering
Жыл бұрын
@@TalkingSasquach gotcha, that's what I thought. It's a shame there's nothing out there yet. Great vid by the way, and thanks for all the work you've done for the community. It's definitely greatly appreciated!
Hi Mate, I follow all the process and installed the latest firmware version both for the flipper and the wifi and when I try to connect in the application and run the ESP32 so it appears "ERROR ... Preload failed API version mismatch ;/ what to do Doc??
@TalkingSasquach
Жыл бұрын
That means whatever FAP you downloaded doesn't match your firmware version. It is currently bundled in SquachWare if you want to try that!
I can’t flash my board for some reason. When I double click on the flash file it puts all the text in the notes app. I’m on a MacBook. Any recommendations
@thetalkingsasquach I have downloaded the recent firmware from Claracrazy and was having difficulty installing FW to use my Flipper zero Wifi Dev board. Do you have any recommendations? I am using a MacBook Pro to program. Thank you.
@TalkingSasquach
Жыл бұрын
unfortunately I'm a PC user so I can't really help too much on Mac
If I just updated the firmware it will these steps work? Thank you have a güd day
Thanks
My guy !!!!!!!!!!!!!
thanks you fing rock. figure out the video part yet?
Failed to connect to ESP32-S2: No serial data received. thats the message i get can someone help
Great vids & info man! I have a question: With the Flipper & dev Wi-Fi board Can you use it as a hidden cam, Wi-Fi, Bluetooth, cell and gps finder? -Thanks
@TalkingSasquach
Жыл бұрын
That's a bit ambitious for the board to do by itself. Theoretically you could kind of do something like this with a multiboard but it would not be easy!
@wykidone
Жыл бұрын
@@TalkingSasquach I want to learn how to do this! Can you point me in the direction to try and solve this problem? Thank you for the reply
could you make a video on how to set up an nrf24 plugin with gpio wires?
hi I have the wifi dev board pro from just call me coco can you show how to flash/use
Is it allready possible to output videos with the WiFi Dev Board?
I got a "Preload failed API version mismatch", any solutions?
@patriotnurse605
Жыл бұрын
same, cannot figure it out.... HELP!!!
@YatYas1833
Жыл бұрын
@patriotnurse605 can't remember exactly what I did but I used chat gpt to help me get there. Just keep inputting your errors into it and it will get you where you need to go. Hope you figure it out.
Does this work as well as the Arduino setup? It is so much easier so I hope it is just as capable.
How did you get the marauder on the display?
hey im having problems when i run the Scan to to the deauther attack my scan says ' PressBACK to send stopscan ' and i cant even get my personal wifi network to pop up, this is all new to me but i get how firmwear is similar to a OS system but, im doing my best here and this is my first device with these capabilities so im having fun either way :) but i could really use some help thank you! a new very overly detailed video every file type and location would help alot of people plus which apps work with what firmwear/version0.0 and maybe we can make large zip drives that have a esp firmwear automaited preloaded switch to unload one and reload the other so we can pack a memory card full then have all we need so when we start building Frankenstein breadboard's ands we have all the softwear we need loaded all together???? Some thing we should all start to work on it, there's plenty of people that want it we just gotta do it!!
I followed everything but the GPIO in applications is not showing up any help?
im missing the gpio folder were you drop ESP32 WiFi Marauder {apps gpio} any help please
why my dev board light go red when i deauth ? (and nothing happend)
Hey, I followed every step in the tutorial and it says load failed unsatisfied import anyone know how to fix?
I would love to have the flipper but I wouldnt know how to use it. What would you recommend learning first?
@TalkingSasquach
Жыл бұрын
Watch my first video, goes over everything you might want to do
@ryshellso526
Жыл бұрын
Kali linux.
mine doestn work it just gives a red light after startup please help
Will Maruader it flash on Windows 7?
Hi, I got a "?" next to [ESP32] WiFi Marauder, then "Preload failed API version Mismatch". Any ideas please?
@Theodoror
Жыл бұрын
I have the same problem, but I think it's because I am using Unleashed and not official FW.
@EnderGameZ.
Жыл бұрын
@@Theodoror I installed the official firmware and it says the same thing did installing the official firmware work for you ?
@edrop13
Жыл бұрын
Hi found a solution ?
@tristanbishop39
Жыл бұрын
@@edrop13 nope!
❤
👍 👍
I am using custom FW do I use dev?
So who makes a 5g wifi board for the flipper?
That explosion reminds me of world box
@TalkingSasquach
Жыл бұрын
Haha yeah it's pretty old-school
Can you edit the Rick roll or add other text to display / add more attacks that are different lyrics
@TalkingSasquach
Жыл бұрын
It's possible!
It's my understanding that the deauth attack only works on 2.4ghz networks, and the 5ghz networks changed the way they do things, so deauth will never work on those networks. Anyone know if that's true or not?
@TalkingSasquach
Жыл бұрын
5ghz is a different frequency, there is an ESP32 in the works that will be able to broadcast in 5ghz, so it may be possible soon.
i for some reason dont have a GPIO folder in the apps section i created one and then go on flipper and cliick on the esp32 and get an error saying preload failed API version mismatch
@osbaldo1591
Жыл бұрын
same problem cant find GPIO folder
Can you do it with a MacBook or only a PC
Is it only possible with the original flipper Zero Wifi DevBoard? Or can it be any ESP32-2 Chip? Wanted to built a esp32 Board on my Owen By the way, I love your Videos, they are amazing
Api version mismatch????
In theroy could you highjack a fruit machine??
is using a 5ghz the quicikest way to prevent such attacks? What's a more secure method?
@TalkingSasquach
Жыл бұрын
That would help!
what If it tells me API version mismatch?
@dr_kellogg
Жыл бұрын
having this same error...anyone?
Anyone else having issues with the latest Squachware running several tools in Applications like name changer and many others? It shows a question mark beside the ones failing and gives an API mismatch error.
@TalkingSasquach
Жыл бұрын
I'll double check everything when I get home, it's best to delete your apps folder before installing cfw if you're running into API issues
@meganut7970
Жыл бұрын
@@TalkingSasquach I'm having the same problem.
what is the radius of the deauthentication? has this been tested also please do more videos about the wifi board and follow its development, i would love to see what else it can do in the future
@notdan
Жыл бұрын
really nobody can give an estimate?
@Jeremy-uo3tf
Жыл бұрын
@@notdan that’s what i’m sayib
my flipper and dev board comes Saturday and I have no idea what I'm doing
@TalkingSasquach
Жыл бұрын
Well this video should help!
I have ran into problems since day one with installing wifi dev board.... I tryed downloading python on window to use esptool but I was never able to install it because my pip was installed on a different path but i never could locate my app folder to find pyton. I went to my virtual machine with kali and now every time I try to open the bat file my entire vurtial machine breaks. I can't believe I wasted so much time.
With my Dev board I sort of have to force it down a little for it to connect with my flipper and it will slowly push itself out if you move the flipper around too much. Is the board suppose to fit snug or is it just naturally suppose to do this?
@TalkingSasquach
Жыл бұрын
Do you have the case for it? Sometimes that interferes and you don't actually end up plugging it in all the way. It shouldn't come out
@Will-fr9hg
Жыл бұрын
@@TalkingSasquach Yea I’ve got the orange case on but it dosnt get in the way at all. If I were to place the flipper standing straight up and pick it up again the board will disconnect.
@Will-fr9hg
Жыл бұрын
They’re both basically brand new. The flipper and the deb board
i've the problem my f... windows does not recognize the board
What is the probe attack???????
I've heard a 5ghz board is in the works. Anyone know eta on this?
@TalkingSasquach
Жыл бұрын
I've been hearing about this for ages and so far its vaporware. Anyway, 5ghz has protections from deauth so it wont be as easy
its not detecting networks pls help
Someone said it's important to plugin the dev board when the flipper is turned off because you risk to ruin both otherwise
@TalkingSasquach
Жыл бұрын
What they're probably referring to is that when you plug in the wifi board, it will brown out the SD card, not a big deal but it does dismount the SD card when you plug it in when the Flipper is on. NBD really
Doesn’t work at all for me. Tried it now for several times, it allways keeps telling me fatal error occurred when flashing marauder
@hool-e-ganfuz2047
Жыл бұрын
When I start searching for access points, it won’t show nothing. So I guess the flashing won’t work for me
Bruh, if someone from Disney sees that "torrent" hard drive, you’re gonna get into a lot of trouble 😂
Are you using a handful of sd cards
I want to pay you yo do a 1 on 1 on building your stand alone marauder. Or make a campaign and I will support.
Finally got my Dev board did all the steps but every time I try to do it it says preload failed API version mismatched what does that mean?
@TalkingSasquach
Жыл бұрын
There was a firmware update and with the holidays, the applications on Uber's repo may be out of date. Give it a a day and it will probably be good to go, just make sure you update your firmware as well!
@EnderGameZ.
Жыл бұрын
@@TalkingSasquach what firmware were you using in this video?
@c0mpute
Жыл бұрын
@@EnderGameZ. rogue master
@EnderGameZ.
Жыл бұрын
@@c0mpute you sure?
@thelockpickinglebowski633
Жыл бұрын
@@TalkingSasquach I'm using Unleashed, but got the API mismatch error. How to fix?
I'm a total noob at this. What skills would i need to acquire in order understand how to use this?
@TalkingSasquach
8 ай бұрын
watch my latest video!
I can’t open the flash.bat on my mac, can you help? 😅
@comrontiana2257
10 ай бұрын
Bro get a windows pc if you can it’s so much easier. Gave up on the Mac after a week.