FLAT TOP SUPER DUTY DANA 60 KNUCKLES & KEYED HIGH STEER ARMS
Автокөліктер мен көлік құралдары
This time on Tech Tuesday we are going to be showing off our Milled Flat Top Super 60 Knuckles that we do right here at Busted Knuckle Off Road. Not only do we mill the top of these Super Duty Dana 60 Knuckles flat but we also leave a key way to match our keyed Steel or Billet Aluminum Super Duty Dana 60 High Steer Arms. This makes for one of the strongest outer knuckle and high steer options on the market. We have been beating on them for years in our turn key rock bouncers with zero failures. So these are the perfect setup for your off road rig. You can even save some money and send your core knuckles in to us for $75 Off for each one.
Get your Super 60 Knuckles and Keyed High Steer Arms at www.bustedknuckleoffroad.com
Пікірлер: 33
I'm just getting started with my first build I will be calling!
@BustedKnuckleOffRoad
Жыл бұрын
Awesome!
another great video Jake
@BustedKnuckleOffRoad
Жыл бұрын
Glad you enjoyed it
So awesome 😎👍.
@BustedKnuckleOffRoad
Жыл бұрын
so much better than weld on
Have yall thought about nord lock washers? They are the greatest.
@BustedKnuckleVideo
Жыл бұрын
Haven’t had an issue with these coming loose.
That is cool. I am assuming I can put a super duty axle in my chevy square body and make your kit work for the high steer ?
@BustedKnuckleOffRoad
7 ай бұрын
Should be able to
Trust me man if I had 150 Grand you would be the one that built my buggy and you would be the one that watched it with everybody's ass you build some damn good buggies some damn strong buggies I would love to own one I work two jobs couldn't get close to it
@BustedKnuckleOffRoad
Жыл бұрын
well hopefully one day you can.
Can you install the tie rod on either the top or the bottom of the high steer arm?
@BustedKnuckleOffRoad
Жыл бұрын
I don’t see why not.
What about adding ball joint delete
@BustedKnuckleOffRoad
Жыл бұрын
We have that as an option.
Can you make knuckles for 99-04
@bustedknuckleoffroadllc5060
Жыл бұрын
No sir, 99-04 knuckles are not a good platform for high steer
Do these knuckles eliminate the auto hub vacuum line port?
@BustedKnuckleOffRoad
Жыл бұрын
no they are still there just not used typically
@Mike-xn1bh
Жыл бұрын
@@BustedKnuckleOffRoad Are your custom knuckles available for the 1999-2004 Ford Dana 60s?
Drilling and tapping the knuckle seems like a bad idea. Opens up a bunch of potential fracture points. For that reason I went with the weld on option.
@BustedKnuckleOffRoad
Жыл бұрын
Welding to a cast knuckle is a bad idea, we have seen many failures from improper pre/post heat procedure on them. These keyed machined knuckles and high steer arms have zero failures on rock bouncers that get absolutely thrashed on.
@SarahSmith-hd8kd
Жыл бұрын
@Ernest... No, you are absolutely correct! I'm glad they made the product and it's a great way to open up that market to those who are to scared of or just uneducated on proper weld preparation/proper techniques and more then likely then also a not so great welder or welders themselves or that they are paying... that's all. Good job innovating Busted Knuckle!😁👊
Need to make one for the dodge dana 60. need to make a new nuckle. mabey I don't know what I'm talking about. But that's why people run the ford is because the dodge nuckle. If we built a custom nuckle for the dodge I would buy a pair in a high steer kit.
@BustedKnuckleVideo
Жыл бұрын
Just doesn’t seem to be enough demand for that
@wcmwfab935
Жыл бұрын
@@BustedKnuckleVideo there is that many ford dana 60s out there? Get the dodge cheaper. Anyway thanks for the reply. Was just thinking. I got dodges 12 valve and 24 valve
@BustedKnuckleOffRoad
Жыл бұрын
we haven't ran out of the Super 60s yet
@bustedknuckleoffroadllc5060
Жыл бұрын
@@wcmwfab935 dodge stuff is low pinion. The ford axle is much stronger so we service it and not the dodge
No 99-04 Dana 60 😢
@BustedKnuckleOffRoad
Жыл бұрын
just 05 and up
@bustedknuckleoffroadllc5060
Жыл бұрын
The 99-04 isnt really a strong enough knuckle. The shafts are limited to 35 spline and 1480 joints. The knuckles are fairly weak too. I dont see us making this package for those knuckles