Diba paps nasa 1.2k rpm naman talaga ang menor? Then kung FI performance yang flatslide normal lang na medyo may kataasan ang idle. Pakinggan mo ang sniper at rs150. Matataas mga idle ng mga yan pati raider fi. Mahina lang sa pandinig dahil tahimik ang tambutso. Balik mo sa stock setting then saka ka na mag adjust after spark plug reading.

@MunsKi

4 жыл бұрын

thanks sa input!

@dragking9735

4 жыл бұрын

yes dapat 1.2 - 1.4k ung rpm, para kce yan for high compression engine na d kayang mag low idle kce namamatay hehe idle speed ko around 1.3k

Labor of love talaga ang pag tono ng carb. Sana bukas may episode 2 na nito.

Guys Don’t skip the ads para makatulong po tayo kay sir Munski. Nice video po!

Yeah! SOLID! More power to you sir! Abang abang lang ako dyan sa flat slide episode mo na yan hanggang mapatino mo sir, baka maka gamit din ako nyan sa sigma ko. 😁

lol. great that I finally found a video that shows and goes through everything I was looking for - only for me to not be able to speak that language. 😅 At least the visuals help!

ayos yan paps may kasama pang libreng jets. ganon talaga pagtutuno ng carb paps sakit sa ulo hehe

Walang nyong lawang Bagong 😁😁😁😁 Anjiiirrrrr Lidah gw KeSLeo 🇲🇨🇲🇨 love From indonesia 🇲🇨🇲🇨

thank you idol munski sa shout out.godlbless.

👌 Quality Papi 👍

awesome mate

Flat type carb with power jet. Ganda yan bro. Need mo din magandang ignition system and sp

Ayus lods.... Ikaw yung nakita kung nagblig na pinakita ang mga mali yung trial and error mu. Shoutout lods

Kung mag totono ka dapat fully warm up yung makina at naka andar makina while tuning para accurate yung idle at mixture.

New subscriber from KSA. More demo... idol.

Boss Munski. Sana makuha mo na yung tamang timpla ng carb na yan tapos any feedback sa performance. Kudos sa HD quality hehe

paps nka dugtong ba talaga ang isang hose sa parang drainan nang gasolina. except sa power jet.

Nice boss munski, inaabangan ko na makita na result, balak ko na bumili ng flatside na carb.. hehe shout outs..!! Salamat boss munski

@junspikeespique668

4 жыл бұрын

Sir normal ba ang hard starting pag malamig ang makina?tnx more power...

@tristanreyes2969

4 жыл бұрын

@@junspikeespique668 marami kasing cause ang hard starting, isa aspect ay oil, second bka hnd malinis spark plug, 3rd tuning.. hnd maganda timpla, or palyado.. Own opinion ko lng..

Sir bakit nag palit na ako jettings 120 at 40 bakit ganun pa din pag mainit siya namamatay at nawawala yung menor

WHICH ONE OF THOSE GOLD NIBS TO I PLUG INTO GAS?? PLEASE HELP! THANK YOU!

@MunsKi

2 жыл бұрын

The one connected to fuel bowl

Sir ano pong throttle cable ang pamalit po sa stock?

Papz.. Ano kaya jettings 30mm flatslide nibbi.. Para sa classic rc250 natin

Paano boss install yung mga hose na yan na transparent? Anu ganit nyan? Roundslide lang kasi gamit ko wala ko alam diyan

Bro. Add to your newbie list: ironic pero you're doin it. Tuning with out air filter lol. Lean tlga yan lol.

bakit po palaging may nag a accumulate na gasolina sa intake manifold ng BARAKO 175 kapag PWK 28mm ang naka install na carburetor?

@MunsKi

Жыл бұрын

nag porting po b kayo?

Sir saan mo nabili yang carb?

Ano pong trottle cable ng ppwde po sa mga ganyan na carb

Matakaw ba sa gas yan paps? Mahirap bayan i tono?

Paps nibbi po ba yan? Tsaka may 30 mm po ba diyan? San niyo po nabili? thank you po at rs palagi hehe

Why not a 30mm

How much bili mo paps?

adjustable din ba ying needle l9ck nyan?

@MunsKi

3 жыл бұрын

yes

Pwde po ba yan sa raider 150 carb 28mm

This is the 1st ccarburetorI got with a tin can & STICKERS since I was young 😎

@yeahrightmate

Жыл бұрын

Wow a tin can and a sticker! and a piece of crap carb that has no spare parts available for it and no size stamped on the needle so you know which way to go when trying to tune it.

@MunsKi

Жыл бұрын

It has spareparts all over the online stores... jets needles gaskets... if it has same size from the branded versions it will work almost identical

@yeahrightmate

Жыл бұрын

@@MunsKi Wrong! you mean you can buy jets and that is it. I have bought and tried every brand I could find on the internet and the other brands do not fit. I damaged my slide and have spent more money on every slide I could find than if I just bought another brand.

@MunsKi

Жыл бұрын

@@yeahrightmate you will buy jets, then youll try it one by one... of course it is not plug and play... thats how you tune a carb, find the correct jets and needle positions... also, make sure it matches your intake port... btw i never changed slides yet

@yeahrightmate

Жыл бұрын

@@MunsKi I did not say anything about tuning! I said spare parts, I am a 65 year old motorcycle rider from Australia and have tune more engines than you have ever seen and I can tell you this brand Maikuni have no spare parts and are crap, they don't even have any numbers stamped on their needles so the first thing you need to do is throw away the needles that come with it so you know which way to go with your tuning.. There are many other brands of after market PWK carb available that do have all the spare parts available.

master magkanu ang flat carb nyan

Lupit ng camera mo paps

What about if you can't find the idle, but the engine starts every time when you crack the throttle?? I have my idle screw all the way in, and still can't get it to idle.... 2 screws on a/f tried different pilot jets, but I think I'm still rich??

@MunsKi

3 жыл бұрын

the most important detail is what size of port you are trying to fit a carb, and what size of carb u are trying to fit in

@NouriGains

3 жыл бұрын

@@MunsKi 27mm intake port 24mm flatslide pwk carb red/black

@dineshsudhakarrao7363

3 жыл бұрын

@@NouriGains is 24 mm flatslider carburator is enough for ,27mm port intake?

@NouriGains

3 жыл бұрын

You guys were no help at all. I figured it out. Was an issue with the carb body getting stuck.

@MunsKi

3 жыл бұрын

yes manifold leak is common issue

Anung carb yan idol?

Sir san mo nabili??

What are the benefits of a flatslide carb?

@OneBiker98

Жыл бұрын

Flatslides usually have better power at the higher RPM range. The normall round carburetors are smoother and easier to tune though. I have a flat slide on my bike.

hep! pers nanaman! hahaha okay lang yan paps hayaan muna yan na hatters mo di yan mananalo samin na mga supporters mo 😂

paano mo napagana power jet mo idol

shout out idol

idol munski, gawa bagong project gawin mo scrambler yun rusi mas marami mag aabang sure

ALIN SA MGA GOLD NIBS NA ISASAKONG KO SA GAS?? TULONG PO! SALAMAT!

Sir munski same tau ng carburador pero yung akin nag ooverfeeding ano kayang problema dito boss

@MunsKi

4 жыл бұрын

kzread.info/dash/bejne/qnplsrOEqbirhNY.html

Paps ok pa rin ba after a months?

@MunsKi

3 жыл бұрын

kahit years

bro ok lng ba class a or replica na carb ano difference nila sa original mojo 200 unit ko

@MunsKi

4 жыл бұрын

hello, sa replica ma tyempo k lng sa may defect , halimbawa walang butas ung dapat may butas, or nabarahan... pero kung hindi k nmn m tyempo s gnun parehas lng sila ng mga sukat, parehas lng din gagana

Pashout out tsaka pahingi ng tips para payagan ako ni Ermats mag motor.

@MunsKi

4 жыл бұрын

madali lng, ung piliin m small cc n motor sabihin m png service lng. tpos tipid kamo sa gas yun. ayun ppyagan k nun hehe

Sir ano po ung naging diskarte sa carburrtor mo nung kusang namamatay ang menor. Same po tayo problem.

@MunsKi

4 жыл бұрын

nasa other videos sir na uplod ko na

Gud day boss.. 3 hose 1 pra sa supply ng gasoline para san ung natirang 2 boss? Iba nman yong pra sa drain plug di po ba boss? Kasi ung 24 di ko mapa gana.. May 3 hose din.

@MunsKi

4 жыл бұрын

vent lng sa atmosphere

mag kano sir?

Saan naka bili nyan ano brand at magkano brother

Boss baka pede pa add ng video sa pag install nung 3 hose po. Newbie here. Salamat!

Mag kno b yan lodi pwed b yan S 175 barako yan

Nice Vid sir :) kaya hindi ko iniSKIP mga ads :)

Paps pano pag may gasgas yung piston sa carbs sa flat side ano magandang gawin

@MunsKi

3 жыл бұрын

palitan slider

Paano ma fix ganyan ko kakadating lang tagas

Saan ka ng order master

Share ko lg experience ko idol. Meron ako nyan dati (28mm), sa mga 900 ata nabili ko sa shopee. Ung problema hindi ko ma tono kahit anong palit ko ng main jet kahit 100 na main jet ko parang lunod parin pag high rpm. Ginawa ko bumili ulit ako ng nibbi na 28mm, isang palit lg ng main at pilot jet tumino ung motor ko, tas parang naging lessen sa gas ung consumption. (Depende sa jettings siguro.) Parang my sira ata ung pinadala sakin na carb. T_T

@hywelgalisim7004

4 жыл бұрын

Anung size Main ska pilot jet pinalit m sir

Sir ano repair kit swak jan sa flatslide?

@MunsKi

4 жыл бұрын

tig 1k lng yan. . kung balang araw masira m yan. palitan m nlng ng bago

Why would you replace a 28mm carb with a 26mm.

@MunsKi

Жыл бұрын

Round slide vs flat slide with power jet.... and the port of this engine is not ported back then

@yeahrightmate

Жыл бұрын

@@MunsKi A 250 Rusi comes with a 28mm flat slide but they have no power.

@MunsKi

Жыл бұрын

@@yeahrightmate no it is not a 28, measurement is at the venturi where the needle is, it belongs to 26 category ... and it is a diaphragm type, not a cable attached slide

Gusto ko mag flat slide

diba maaksaya sa gas ang flat slide?

@MunsKi

4 жыл бұрын

we will find out hehe

para saan po ung mga connection ng hose ? pasagot nmn po salamat

@MunsKi

3 жыл бұрын

vent

Sir paturo ng pag salpak ng hose

Vlog and play ayos paps ikaw dahilan Kong bakit ako na pa bili Ng rusi classic 250

BOOOOSS SAAN MAKABILI SA SHOPEE NG JETTINGS NABILI KO KASI SAME NG BUTAS LANG

Sir ano pinagkaiba nya sa stock carburetor natin?

@MunsKi

3 жыл бұрын

throttle response and better performance

@al1315

3 жыл бұрын

@@MunsKi salamat sa reply RS

Sir, pwde po ba ito sa 2 stroke?

@kelvintroyc.alfaro3319

4 жыл бұрын

Boss pwd ba yan sa 2 stroke yamaha dt.

@MunsKi

4 жыл бұрын

pwede yan

Magkano bili mo sa carb na 26mm???,salamat and RS po

@MunsKi

4 жыл бұрын

nsa 1300 lang sir

@adamcaloza5887

4 жыл бұрын

@@MunsKi salamat po

How much paps yn

@MunsKi

4 жыл бұрын

1200 lng lazada

Boss.....pwde b gnyang carburador sa zx125 na Rusi?...

@MunsKi

4 жыл бұрын

yes

@tiger051986

4 жыл бұрын

@@MunsKi boss bale ano ba ung ideal or best na carburettor na pwde kong ikabit sa zx125 Neptune ko? Kasi...plano ko mglong ride from panggasinan to Leyte...more power sa vlog mo boss. 💯👍

@MunsKi

4 жыл бұрын

meron yan 24 mm n size ung nsa vid.. i think iyon, if u want madali i tono at sakto lng sa engine, right size lng, wag over

@tiger051986

4 жыл бұрын

@@MunsKi thanks boss.....mgsub ako syo👍👍

Nagpalit ka ng camera? Gumanda ung vid quality e.

MAHIRAP TALAGA ITONO ANG FLATSLIDE NA CARB

Baka mgastos sa gas Yan sir

@MunsKi

4 жыл бұрын

gagawan ko palang ng video sa fuel economy.

Boss makikihingi sana ako ng link ng pinagbilhan mo bibili kasi ako ng flatslide 26mm kasi mag papalit ako ng carb sa hd3 ko. Trusted na kasi seller ng pinag kuhanan nyo. Salamat.

@MunsKi

4 жыл бұрын

hello, marami pa magandang brand gaya ng koso ksr, pero kung gusto mo to. MAIKUNI ang tatak search m sa lazada or shoppee marami lalabas, tapos mapapansin mo ung iba, walang brand pero kamuka, pare parehas lng yan ng pinagkuhanan.. ung sakin from chinese store din sa lazada

@rennierrodil6119

4 жыл бұрын

@@MunsKi ahh sige po salamat. Mejo budget oriented kasi hanap ko paps munski. Kumbaga budget friendly na kargadong hd3 scrambler hehehehr

Tumagal po ba dn ito sau sir

@MunsKi

3 жыл бұрын

Wala naging problema

This is a 2 stroke carburetor. You need to close the 2 t oil valve.

@MunsKi

4 жыл бұрын

guess what, it doesn't have such things, welcome to year 2020

@ronosys

4 жыл бұрын

@@MunsKi are u sure. Because i do use the same carburettor for my 2 stroke bike.

@MunsKi

4 жыл бұрын

i installed it and is working in my 4 stroke...

@ronosys

4 жыл бұрын

@@MunsKi great dude. All the best.

@jpetrick402

2 жыл бұрын

Which one is the 2t oil valve

haha bat kasi ginalaw pa float

Never buy one of these Maikuni brand carburetors and especially the black model. The paint of the black one is not even fuel proof and comes off in your fuel bowl like plastic film and blocks up everything but also there is no spare parts for these carbs and as they are copied of a branded carb the internal sizes are not the same and other brands do not fit so steer clear of this brand.

Paps penge link sa lazada nito please

@MunsKi

4 жыл бұрын

search nyo lang maikuni. marami p msmgnda brand dyan

im assuming you have a 115 main and a 32 pilot jet as thats the only pwk carburetor set up that will even run on a 250cc high output zong engine. if your trying to install this on anything less then 250cc and its not a ktm dirt bike your wasting your time you cant turn the pilot jet down enough to enjoy half to full throttle or high rpm or gears. so if again your having issues and watching this do a few things right now.....buy a mikuni vm26 and use a 27.5 pilot and a 115 main you will be set and also ......NEVER TUNE A BIKE WITH OUT THE AIR FILTER OR TUBING ON....... just wow if your going to teach come proper my guy

@MunsKi

3 жыл бұрын

i tuned it perfectly, this was last year, thanks for the comment

first .?

@pabling6963

4 жыл бұрын

second lng pala haha

@mumskieeserva856

4 жыл бұрын

heheh

Mas maganda talaga orig kesa class A mas madali itono

Anu sir ang name ng carb

@MunsKi

4 жыл бұрын

maikuni

@iamginomotovloggino7446

4 жыл бұрын

Maganda vha performance sir

Sana may carb na walang jet

@MunsKi

4 жыл бұрын

meron. needle lang n flat

@ireneodevera2078

4 жыл бұрын

Huwag kng tangatangahan.

orig yan ah.. maikuni

Lodi Pangit ata talaga yung carb na ganyan. Ganyan din kasi sa akin ang hirap ituno hinde tulad ng mga original carb madali lang ituno

@MunsKi

3 жыл бұрын

na tono ko yan sir.

Its NOT a flat slide. Its a DSlide

Not easy to install

hahahaha ,,,hindi pala naka kabit

😂😂😂

LOL Maikuni. Man, the Chinese have no shame for knocking products and names off.

@MunsKi

4 жыл бұрын

dont worry im done with the tsinese thts why upgraded my ride.. 👌i bought a new bigger bike which doesn't need much thinkering

Aduh ini bahasa apa?....

Lol

di mo dapat pinakialaman yung float

The hell what language is he speaking? Englisch with some asian mixed or what lel

@MunsKi

3 жыл бұрын

Filipino

@KingShoxx96

3 жыл бұрын

@@MunsKi haha funny dude but nice video!

also speak English if your going to post your video title in English or a wide audience..its just click bait for anyone that cant speak or understand your language.

@MunsKi

3 жыл бұрын

i thought english man knows how to tune a carb already and dont need KZread viedo experience

@MunsKi

3 жыл бұрын

here with subtitles kzread.info/dash/bejne/e3eE1quDaLyfebQ.html

Hindi mu yan matutuno agad bossing kasi malamig pa makina mo..at isa pa..hindi talaga magandang carb na ganyan..pati deto hindi yan gumagana nang maganda

@MunsKi

4 жыл бұрын

gamit ko daily use. wag ka mag alala, engineering degree holder ako

Anung carb yan idol?