I’ve got to say Terry that is one hell of a brilliant job you’ve done there. Your logic is spot on and the whole thing will end up looking stock standard. Great work mate!

@JafffaAdventures

2 жыл бұрын

Thanks David, that is very kind of you to say mate. I'm certainly enjoying the process, it's just taking me a lot longer than I originally anticipated. Have a great weekend David!!

I love your attention to detail with this build, right down to the cut and shut of the little panels that will essentially serve no purpose but they just look spot on. 👍🏻👍🏻

@JafffaAdventures

2 жыл бұрын

Thanks Shane, I appreciate the kind words mate. I tried to just weld the front headboard back on without the little panel cut and shut but my OCD took over and I just couldn’t do it. I’m sure I’ll be glad in the end but those little suckers almost took as long to do as the whole tub😂. Thanks for watching and commenting mate, I sincerely appreciate it 😎👍

Oh man Terry im so excited about this episode. Looking forward to watching on the weekend.

@JafffaAdventures

2 жыл бұрын

Good stuff Clinton, thanks for the support mate. I trust you will find it entertaining. Cheers😎👍

Always look forward to seeing fj clips

@JafffaAdventures

2 жыл бұрын

Thanks mate, it’s a blast to work on that’s for sure. Cheers😎👍

You're a real jack of all trades hey Terry. Keep up the great work mate

@JafffaAdventures

2 жыл бұрын

Thank you mate, that is very kind of you to say. I'll have a crack at anything, whether I'm any good at it, well that's another story! Cheers!

Magnificent job Terry. Its interesting to see the impact driver come out and its brand new. Imagine what the poor bugger taht goes to take it out in 50 years will say.

@JafffaAdventures

2 жыл бұрын

Thanks Daniel, that is very kind of you to say mate. I know, I could not believe how tight those brand new screws were. Must have been a sumo wrestler that put them in. Cheers😎👍

I have just finished watching the FJ45 build series thus far, it's great to see the fabrication and problem solving in such a project. Looking forward to seeing the upcoming instalments.

@JafffaAdventures

2 жыл бұрын

Thanks Peter, I am really glad you have found something worthwhile in the content. I’ll try my best to keep it coming. Cheers 😎👍

Wow...great job on this project! It is coming along nicely for sure!

@JafffaAdventures

2 жыл бұрын

Thanks mate, that’s very kind of you to say. Cheers😎👍

It's getting to point where one could ask "So how much is a new 79?". Don't worry Tez. We know you're doing it for love. :-)

@JafffaAdventures

2 жыл бұрын

You got it in one, my cars are an expression of me😎👍

Hola Terry, German saying: measure twice - cut once…. 😂 Cheers from Spain today..

@JafffaAdventures

2 жыл бұрын

Yes indeed, I got it right this time! Enjoy Spain mate. Cheers.

You're a clever guy Terry.

@JafffaAdventures

2 жыл бұрын

Thanks Steve, that is very kind of you to say mate. Have a great weekend! Cheers!

More great skills there Terry, looking great mate. Cheers Steve

@JafffaAdventures

2 жыл бұрын

Thanks Steve, that’s very kind of you to say mate. Have a great weekend 😎👍

I’ve been looking forward to this Terry!

@JafffaAdventures

2 жыл бұрын

It's been in the works for a while Justin, I trust it lives up to your expectations. Cheers.

Another great job , keep up the good work Terry.Martin Thailand 😎

@JafffaAdventures

2 жыл бұрын

Thanks Matin, I appreciate the encouragement very much. Cheers

once again great work and skill its a pleasure just watching your videos, Thanks.

@JafffaAdventures

2 жыл бұрын

Thanks Terry, that is very kind of you to say indeed. Have a great weekend mate 😎👍

Always enjoy your videos thanks Terry

@JafffaAdventures

2 жыл бұрын

Thanks Paul, that is very kind of you to say and certainly encourages me to keep producing. Cheers!!

Well mate if that intro didn’t grab your attention you must be about to flatline 😉 Love the progress 👍

@JafffaAdventures

2 жыл бұрын

That’s too funny mate, thanks for the support 😎👍

Nice one Terry, very informative, Don't forget your seam sealer either mate.

@JafffaAdventures

2 жыл бұрын

Thanks Matt, I appreciate you taking the time to comment. Cheers😎👍

Awesome work Terry I loved that, Just what I needed, just at home at Cooroy and its been raining heaps,

@JafffaAdventures

2 жыл бұрын

Good stuff Craig, I'm glad it's taken 30 minutes of the worry of rising waters out of your day. Have a great weekend mate, and let's trust it begins to dry out. Cheers

Awesome job. I'm liking this project.

@JafffaAdventures

2 жыл бұрын

Cheers mate, thanks for sharing 😎👍

Another incredible stage, thanks for sharing. Starting to take shape now.

@JafffaAdventures

2 жыл бұрын

Thanks for commenting mate. I’m pretty excited, as you suggest it’s starting to look like a vehicle again!! Cheers😎👍

I learnt that about bondo after my first trip away to North straddie after touching up my bullbar

@JafffaAdventures

2 жыл бұрын

Good stuff, we all have to learn, sometimes the hard way. Cheers😎👍

Amazing work!

@JafffaAdventures

2 жыл бұрын

Thanks Anthony, that is very kind of you to say mate. Have a great weekend!

Unbelievably useful & timely video - I am just about 50% through this exact same job. Same tub on an '84 HJ47. Not a straightforward proposition in Ireland let me tell you.😶

@JafffaAdventures

2 жыл бұрын

That is amazing timing Nick. Maybe you could overtake me and then tell me how to do it😉. Cheers 👍😎

Nice work, enjoyable to watch. Great job of filming and editing too Terry.

@JafffaAdventures

2 жыл бұрын

Thanks for the kind word mate. I put a lot of time into the filming and editing and it pleases me greatly that you have noticed and actually commented about it. You made my day, cheers😎👍

great job Terry. I'll be up next week with my rear 4wd for you to do up thanks mate.lol

@JafffaAdventures

2 жыл бұрын

Too funny Jim. Thanks for watching and commenting mate, I sincerely appreciate it 😎

Despite quite a lot of work to drill out all the spot welds, the front of the tub came off pretty easy. Well done mate.

@JafffaAdventures

2 жыл бұрын

I agree Frank, it came off a lot easier than I thought it would. Thanks for the encouragement mate, cheers!

I'm excited about this ☺️.. what an awesome build Terry 👍🏼

@JafffaAdventures

2 жыл бұрын

Thanks Dan, you and me both. Thanks for the encouraging words mate, I really do appreciate it. Cheers!

Yep! sometimes we learn the hard way (I've done that a lot!). Me personally for bodywork, I use a quality 2 pack sealer (PPG), then a compatible filler & then the 2 pack primer surfacer (PPG). The sealer should always be left in tact when sanding the filler, isolating the steal as the filler in time will sweat & then rust on the steel even though it is sealed under paint (I'm talking over years, but don't ask me how I know) Unfortunately the paints I use, the sealer must be coated within 24 hours or it needs to be reapplied for adhesion reasons (be it for filler or primer). If you break through the sealer to steel when sanding, then it has to be reapplied. At least the sealer, filler & primer are all different colours. Thinking I'm liking the build idea, I will go back to the start to catch up. I Built an FJ40 with a 308 some 25 years ago when I lived in S.E. Qld, I loved that truck! Thanks for another entertaining video!!

@JafffaAdventures

2 жыл бұрын

Thanks for the kind words and the advice Rod, I sincerely appreciate it. Sounds like your 308 powered 40 would have been awesome. I trust you will find some entertainment value in this build, if not there are plenty of better builders than me out there creating content. Go well mate.

@LimestoneCoastCustoms

2 жыл бұрын

@@JafffaAdventures it's not necessarily the better builders being out there, we all face that but the important thing is we all have a go! & Of course, like you... Have fun along the way! 👍 I'm lucky with a few skills, but like I mentioned, I've also made plenty of Blues over the years too! 😵‍💫 Yes, while I used to own & run a Resto/Hot Rod Shop there are many other skills I wish I had. Ya never stop learning. I just wish I could afford to retire, I'd be busier than ever! Keep up the great content mate, it's great stuff! 👍 (Plus I miss Qld. 😉)

@JafffaAdventures

2 жыл бұрын

Thanks for the encouragement Rod, I appreciate it. As you said, for me it’s all about having a go. I often get it wrong, but learning is one cool thing out of it all😎👍

Ahhhhh....a cliff hanger ....where is the rest of the video ? 😃😃😃😃 Nice work...

@JafffaAdventures

2 жыл бұрын

Thanks mate😂😂. Stay tuned, or not😉😎👍

@kealahau6727

2 жыл бұрын

@@JafffaAdventures I am on the edge of my chair brother...can t wait 🤣

@JafffaAdventures

2 жыл бұрын

Part 2 released on Friday, but I’ll give you the inside scoop, it’s another cliff hanger😂👍

Really should etch primer before bog. Bog is porous and absorbs moisture and holds it against bare steel causing rust.

@JafffaAdventures

2 жыл бұрын

Cool, thanks 😎👍

Nice Job. I am going to do the same job in my fj45. Plase would you can make the secon part. Plase i need this

@JafffaAdventures

2 жыл бұрын

Thanks Berny. There will actually be 3 parts. They will be coming out over the next few weeks. I release content every Friday, either check back in then or just subscribe and turn on your notifications. Cheers

@bernyf501

2 жыл бұрын

Hi Dear i want to.comunicate with you to share ideas about the supports and share pics. Is it posible?

Could you please advise what you coated your chassis with?

@JafffaAdventures

Жыл бұрын

It’s a 2 pac chassis black. There is a whole video in the library on the subject. Cheers😎👍

sorry can't spell ( real )

@JafffaAdventures

2 жыл бұрын

Too funny mate😂👍