Nothing wrong with those welds Andrew, should support an elephant. Great refurb of that trailer mate, she’ll carry plenty of old metal for you to work on in the future. I know it takes money to do stuff like this Andrew but mate you get your return in knowing your machinery because you’ve fixed it yourself and it’s money in the bank, plus you are building and extending your equipment list, really well done mate, you should be real proud of yourself. Shout out to your buddy for giving you a hand
@LightningFabrication3 ай бұрын
Just a suggestion for the next time you have to jack up the whole trailer. Unhook it from the tractor / truck. let the trailer all the way down in the front. You can use your floor jack to let the tongue down so it's all most touching the ground. Set your jack stands under the rear of the trailer. Jack the tongue back up using the floor jack then the tongue jack, then set your front jack stands. Set the trailer down on the front stands. No more using the hi-lift jack and having the trailer slide off of the jack stands. Nice job on the trailer.
@t.l.robinson21622 ай бұрын
You are doing an excellent job on your trailer. With so many young people doing nothing but getting into trouble it is very refreshing to see a young man doing something positive and VERY worthwhile.
@charlieretro
2 ай бұрын
I found it interesting that they retained the scene with the jack falling. While most would have edited it out, they chose to keep it, demonstrating the potential risks involved.
@Grandpa_in_California3 ай бұрын
Howdy from California: "Not too bad for someone that doesn't know what they're doing." Young man, don't cut yourself short!! Its obvious you DO know what you're doing on ALL points. Subscribed a while back ~ I'm a Grandpa and get a good feeling when I see young people dedicate their lives towards a worthwhile, clean path. Don't usually comment; however, I had to put my two-cents worth in after hearing your comment! (Which by the way, pro or amateur, turned out pretty good!!) Take care and stay safe & healthy!!
@lyleminyard2308
3 ай бұрын
Great job again, Andrew
@donaldfranklinjr70872 ай бұрын
Awesome rebuild on the trailer keep up the good work keep posting new videos on new projects 🤘
@MasonHunter112 ай бұрын
andrew camaratas long lost son
@jimamundsen70292 ай бұрын
Great job Andrew, very professional. Love that you made the trailer safe, when you see so many on the road that are not road worthy. Only thing I would do that you haven't done (yet), is a paint job on the tongue and to replace those ugly (but still serviceable) deck boards. Again - great job!
@thesmallenginekid
2 ай бұрын
I considered paint but decided to hold off until I replace the deck. Which I will do one I start falling through it in places.
@jimamundsen7029
2 ай бұрын
@@thesmallenginekid Hahaha! Sounds like a good plan! I look forward to the next episode.
@johnhewitt75393 ай бұрын
Great video so much background information whilst working. Your work ethic is great I think when you get a new project you are genuinely excited to crack on and get it done. Another project another success. Well done keep it up and take care.
@Dancing_Alone_wRentals
2 ай бұрын
Great comment...I agree!
@edkennard723 ай бұрын
Andrew, when we used to have to replace the grommets on the clearance lights, if we were close to electrical source we would use a heat gun and heat the grommets up then slip the lights right in. It works like a dream. It sure does save on your hands doing it that way. The other is just like the man said lower the front put your Jack's jack stands in the back then lower the front end. Then Jack it back up with your tongue jack and your floor jack then put them in the front. You'll never have a problem with it sliding off. That's hell. We used to do it in the shops when we had to do brakes on a 53-ft trailers works like a dream
@Military-Museum-LP3 ай бұрын
A good, and informative video. Thank you.
@Dancing_Alone_wRentals2 ай бұрын
Super job, You knocked that out !
@frankpoer31202 ай бұрын
FYI when installing the lights in a new gromit I always added a little bit of dawn dish soap helps alot
@jt9498
2 ай бұрын
Instead of dish soap, use a little Vaseline on the grommets. The lights will pop right in. :) Oh, and on the light electric connectors, use some dialectric grease. It will keep the moisture out and prevent rusting.
@daleh6457 күн бұрын
Making old stuff new again 👍 Good tip putting grease on the screw heads, I’ll use that idea. I figured you give it a quickie paint job too. 🙏🏼🇺🇸✌🏼😎 MAGA
@Military-Museum-LP3 ай бұрын
Nice welding Andrew!
@Steventhedieseltechapprentice3 ай бұрын
Saw you with the Oliver at the Zagray tractor pull the other weekend!
@carolyndean45913 ай бұрын
I do enjoy your videos.
@noahcarlisle52913 ай бұрын
nice work keep up the videos God bless
@johnhicks7352 ай бұрын
I know it's been 9 days since you done that wiring on that trailer. I'm just now watching the video on it myself today. I believe and think that could be your wires to the Hazzard flashing lights/ warning lights.
@hoists18293 ай бұрын
Great video
@user-fs9cs7no5g2 ай бұрын
Next time you have a problem with the lights and the grommets, put something like WD40 on your fingers around the grommet and it will be easier for you.
@salvatorevitale-oe3zfАй бұрын
So you don't have to check out all your lights on trailer by running back and forth from test get a old mirror to a frame so you can view from front of trailer 😂😂😂just a suggestion go for back up in the future even if you put wheels on a A frame that folds to pack away for future use 😊
@jimrerko34153 ай бұрын
Andrew, you need a building to work in.
@johnbroadbent90343 ай бұрын
when fitting the lights into the grommets use liquid soap
@O.KFarmToysdeutzallis62753 ай бұрын
finnaly been a while thanks for the video
@JonathanSparks-ht4vq3 ай бұрын
I believe you said that the trailer is a 2007. If I’m correct there’s an antilock brake actuator on the trailer that’s supposed to flash one of the marker lights when the connector is pulled out of the power supply. If you’re ever pulled over by the DOT, that’s supposed to be in working order. Otherwise you could be placed out of service
@thesmallenginekid
3 ай бұрын
There is no ABS system on the trailer I have seen. I know bigger commercial trailers have the ABS system and light. Usually DOT does not mess with non commercial smaller trailers.
@Mach34i3 ай бұрын
Hi great vid. Please becareful using that cut off grinder. Noticed you cut off mounts on that box. Holding box in one hand and operating grinder with other. You see how the grinder wheel jumped. Your hands and fingers are important do not lose them be smart be safe. It takes a second to slice off a finger. 20:34 d.
@michelboisvert56842 ай бұрын
hi, as long as the whole trailer has to be repaired, it seems to me that a bit of paint would have been nicer before putting all the equipment back in place, don't you think?
@waynetubbs59143 ай бұрын
3 more times!!! Lol , nice job
@thesmallenginekid
2 ай бұрын
yeah, that's what I meant. I need a better video editor/producer!
@Mack.of.all.trades2 ай бұрын
When you did the wiring, and you tested to see what did what. How did you do that? Did you have the black wire on black then used the red end on your jump pack to test each wire?
@johnhicks7352 ай бұрын
Or what's called caution lights also.
@toddcaskey99842 ай бұрын
I'm surprised u didn't paint it ? Great job , how much did it cost to put the breaks on
@barrygrant29073 ай бұрын
Nice job, but for the life of me, I have to wonder why so many YT'ers refurb something and never bother to actually clean the old bearings, just wipe the old gunk off and slap on some fresh grease. Why?
@thesmallenginekid
3 ай бұрын
Bearings looked fine, fresh grease and they should not have any issues. I will keep an eye on them when towing to make sure none of the hubs get hot.
@TheHobbyKid13 ай бұрын
I wish i had space for this stuff
@BoTTanker3 ай бұрын
I’m here from TikTok looking for a video on the green non running deer with fuel issues
@user-fx2ue9eb9c2 ай бұрын
No te preocupes
@TF8563 ай бұрын
Please stop misusing the word "ton". You did not get 2000 lb of rust off of that!!! It is not more than 2000 lb. It is not less than 2000 lb!!!
@williamfrench9973
3 ай бұрын
Please look up “colloquialism”. His use of the term in this informal way is appropriate and widely accepted.
@ChrisMFlorida
3 ай бұрын
Chill. It's a saying.. referring to a lot or large amount. Not literal.
Пікірлер: 49
Nothing wrong with those welds Andrew, should support an elephant. Great refurb of that trailer mate, she’ll carry plenty of old metal for you to work on in the future. I know it takes money to do stuff like this Andrew but mate you get your return in knowing your machinery because you’ve fixed it yourself and it’s money in the bank, plus you are building and extending your equipment list, really well done mate, you should be real proud of yourself. Shout out to your buddy for giving you a hand
Just a suggestion for the next time you have to jack up the whole trailer. Unhook it from the tractor / truck. let the trailer all the way down in the front. You can use your floor jack to let the tongue down so it's all most touching the ground. Set your jack stands under the rear of the trailer. Jack the tongue back up using the floor jack then the tongue jack, then set your front jack stands. Set the trailer down on the front stands. No more using the hi-lift jack and having the trailer slide off of the jack stands. Nice job on the trailer.
You are doing an excellent job on your trailer. With so many young people doing nothing but getting into trouble it is very refreshing to see a young man doing something positive and VERY worthwhile.
@charlieretro
2 ай бұрын
I found it interesting that they retained the scene with the jack falling. While most would have edited it out, they chose to keep it, demonstrating the potential risks involved.
Howdy from California: "Not too bad for someone that doesn't know what they're doing." Young man, don't cut yourself short!! Its obvious you DO know what you're doing on ALL points. Subscribed a while back ~ I'm a Grandpa and get a good feeling when I see young people dedicate their lives towards a worthwhile, clean path. Don't usually comment; however, I had to put my two-cents worth in after hearing your comment! (Which by the way, pro or amateur, turned out pretty good!!) Take care and stay safe & healthy!!
@lyleminyard2308
3 ай бұрын
Great job again, Andrew
Awesome rebuild on the trailer keep up the good work keep posting new videos on new projects 🤘
andrew camaratas long lost son
Great job Andrew, very professional. Love that you made the trailer safe, when you see so many on the road that are not road worthy. Only thing I would do that you haven't done (yet), is a paint job on the tongue and to replace those ugly (but still serviceable) deck boards. Again - great job!
@thesmallenginekid
2 ай бұрын
I considered paint but decided to hold off until I replace the deck. Which I will do one I start falling through it in places.
@jimamundsen7029
2 ай бұрын
@@thesmallenginekid Hahaha! Sounds like a good plan! I look forward to the next episode.
Great video so much background information whilst working. Your work ethic is great I think when you get a new project you are genuinely excited to crack on and get it done. Another project another success. Well done keep it up and take care.
@Dancing_Alone_wRentals
2 ай бұрын
Great comment...I agree!
Andrew, when we used to have to replace the grommets on the clearance lights, if we were close to electrical source we would use a heat gun and heat the grommets up then slip the lights right in. It works like a dream. It sure does save on your hands doing it that way. The other is just like the man said lower the front put your Jack's jack stands in the back then lower the front end. Then Jack it back up with your tongue jack and your floor jack then put them in the front. You'll never have a problem with it sliding off. That's hell. We used to do it in the shops when we had to do brakes on a 53-ft trailers works like a dream
A good, and informative video. Thank you.
Super job, You knocked that out !
FYI when installing the lights in a new gromit I always added a little bit of dawn dish soap helps alot
@jt9498
2 ай бұрын
Instead of dish soap, use a little Vaseline on the grommets. The lights will pop right in. :) Oh, and on the light electric connectors, use some dialectric grease. It will keep the moisture out and prevent rusting.
Making old stuff new again 👍 Good tip putting grease on the screw heads, I’ll use that idea. I figured you give it a quickie paint job too. 🙏🏼🇺🇸✌🏼😎 MAGA
Nice welding Andrew!
Saw you with the Oliver at the Zagray tractor pull the other weekend!
I do enjoy your videos.
nice work keep up the videos God bless
I know it's been 9 days since you done that wiring on that trailer. I'm just now watching the video on it myself today. I believe and think that could be your wires to the Hazzard flashing lights/ warning lights.
Great video
Next time you have a problem with the lights and the grommets, put something like WD40 on your fingers around the grommet and it will be easier for you.
So you don't have to check out all your lights on trailer by running back and forth from test get a old mirror to a frame so you can view from front of trailer 😂😂😂just a suggestion go for back up in the future even if you put wheels on a A frame that folds to pack away for future use 😊
Andrew, you need a building to work in.
when fitting the lights into the grommets use liquid soap
finnaly been a while thanks for the video
I believe you said that the trailer is a 2007. If I’m correct there’s an antilock brake actuator on the trailer that’s supposed to flash one of the marker lights when the connector is pulled out of the power supply. If you’re ever pulled over by the DOT, that’s supposed to be in working order. Otherwise you could be placed out of service
@thesmallenginekid
3 ай бұрын
There is no ABS system on the trailer I have seen. I know bigger commercial trailers have the ABS system and light. Usually DOT does not mess with non commercial smaller trailers.
Hi great vid. Please becareful using that cut off grinder. Noticed you cut off mounts on that box. Holding box in one hand and operating grinder with other. You see how the grinder wheel jumped. Your hands and fingers are important do not lose them be smart be safe. It takes a second to slice off a finger. 20:34 d.
hi, as long as the whole trailer has to be repaired, it seems to me that a bit of paint would have been nicer before putting all the equipment back in place, don't you think?
3 more times!!! Lol , nice job
@thesmallenginekid
2 ай бұрын
yeah, that's what I meant. I need a better video editor/producer!
When you did the wiring, and you tested to see what did what. How did you do that? Did you have the black wire on black then used the red end on your jump pack to test each wire?
Or what's called caution lights also.
I'm surprised u didn't paint it ? Great job , how much did it cost to put the breaks on
Nice job, but for the life of me, I have to wonder why so many YT'ers refurb something and never bother to actually clean the old bearings, just wipe the old gunk off and slap on some fresh grease. Why?
@thesmallenginekid
3 ай бұрын
Bearings looked fine, fresh grease and they should not have any issues. I will keep an eye on them when towing to make sure none of the hubs get hot.
I wish i had space for this stuff
I’m here from TikTok looking for a video on the green non running deer with fuel issues
No te preocupes
Please stop misusing the word "ton". You did not get 2000 lb of rust off of that!!! It is not more than 2000 lb. It is not less than 2000 lb!!!
@williamfrench9973
3 ай бұрын
Please look up “colloquialism”. His use of the term in this informal way is appropriate and widely accepted.
@ChrisMFlorida
3 ай бұрын
Chill. It's a saying.. referring to a lot or large amount. Not literal.