For all that was put into this Thunder-Tank; it still leaves so much to be desired.....Lights & sounds, a spring loaded cannon, & a rear exit ramp. It would have been nice to have some option to change the seating arrangement as well. Maybe it's time to start petitioning Ramen Toy!

@Robd07

11 ай бұрын

This atleast should have had lights! I just recently the Aliens APC tank from Hiya Toys and it lights up! Unbelievable this doesnt have lights

They actually said originally that it was supposed to be removable

@MJR-Reviews

Жыл бұрын

Lol well those plans must have changed 😑

@cirillamande8243

Жыл бұрын

Your the best mega jay retro!!!!!!

@wyldelf2685

11 ай бұрын

Thanks for showing the ThunderTank , , you reminded me of how absurdly LARGE Lion-O and Panthro actually were , , i remember a battery powered finger ring device that you push into back of figure to light up their eyes , , , in early 80s i had only one figure , , Lion-O hoooooooo👍😸👍

I think there is a real opportunity here for someone that 3D prints parts to sell a mod kit for the tank. A swap-out for the turret base, whether that's a plate or some other shape. pegs for the front holes, maybe some seats that can be swapped in.

When you read the box it does imply that the gun turret is removable. I contacted super 7 about possibly selling extra chairs but they said it wouldn’t be possible.

that's great! that canon base bugs me too here is a suggestion - remove the seats, place a new flat floor , add magnets under the floor and under the seats and you could place the seats farther apart for leg room or facing each other at the sides- But i would really like to have mine customized when it arrives with that opening door at the back where the lower part becomes a ramp ( if my memory is correct) thanks for this helpful video

@MJR-Reviews

Жыл бұрын

Great suggestion thanks brother!

Thank you very much for this. I did this and put the broken bow captain archer chair. It looks so nice.

@MJR-Reviews

Жыл бұрын

Wow nice!!!

How many people, the moment he flipped the tank over immediately were like "It's those four screws"? 😜

Great video. Thanks so much, MJR!

@MJR-Reviews

Жыл бұрын

Thanks glad you enjoyed it!

I just did the exact samething you did. On the post of the cannon I removed the screw and slid it out from the bottom.

I get your complaint but super seven made the thunder tank cartoon accurate when the thunder tank first debuted it seated lion o panthro cheetara tigra wily kit and kat that's why there are four seats in the back to accommodate the main thunder cats cast . Just alittle heads up Incase your wondering why the tank is made like it is.

@MJR-Reviews

Жыл бұрын

I hear you brother but I do not remember anything about a gigantic round pedestal in the back holding up the cannon. So I'm guessing that was left up to interpretation. I'm just making the change that makes sense for me.

What a brilliant idea..but to honest what really kills me about the tank are the four holes on the very top front..surly someone can 3d print some kind of cover..they stick out so bad and qerw the first thing i noticed when i first unboxed the tank

@MJR-Reviews

Жыл бұрын

Yep trying to get that worked out! I have a friend working on a 3D rendering and trying to find someone who has a 3D printer!

That was painful to watch 😬 But I understand if something bothers you. I think we all do that to one of our toys one time or another. Kudos to you 👍🏻👍🏻

@MJR-Reviews

Жыл бұрын

Prepping for surgery!

@masonj4779

Жыл бұрын

@@MJR-Reviewsnot even close. You fouled up using a simple screwdriver

Now you can put Mummra The Ever Living in the Thundertank and Snarf LOL!🤗🙄🙏👍

@MJR-Reviews

Жыл бұрын

Lol Right?

Place a pole for Cheetara to pole dance?

Wondering why a sliding clip on seat customisation is not thought off from S7 for that area. Which you can put additional 2 more seats space. Plus for the blaster section, the center can be as rachet platform for the blaster. (Example figure stand which you can do for dynamic poses) Utilise the same concept.

But what about the treads? What kills me even more than the cannon is the fact that the things has rubber treads and casters, but for whatever reason they barely move, and instead it just rolls around on the little dummy wheels on the bottom.

@MJR-Reviews

Жыл бұрын

No it definitely rolls! You just have to press down on it hard enough, and on a really smooth surface.

@ckhtiiger

Жыл бұрын

@@MJR-Reviews I mean, I know they MOVE, but I'd like them to move EASILY.

@philludwigsen1069

Жыл бұрын

Total waste of resources and tooling on those treads could have been stationary and saved a ton of cost to us.

I cringed when I worked at modding my Ghostbusters Proton pack, and my Nerf Aliens M41A pulse rifle, so I know how you feel. Luckily, they worked out.

Only learning of this video now, a month late. Nice going! Looking forward to updates. I would suggest you don't even try to match the color exactly when you make your "patch" piece. Go the opposite route and make the patch a noticeably different color. It would look like a floormat. If I had a T-tank, I'd try to figure out how to mount fold-up seats along the sides of the compartment. Also, I'm sure there's a better way to install the cannons, but that would probably require more "permanent" modifications to the tank.

@MJR-Reviews

Жыл бұрын

Thanks Jim! Great suggestions! I trying to work with a 3D renderer to see if we can make something happen!

Whats the diameter of the cannon base? since that wall protector was 127mm

The grey tiled floor from a playmobile police station might work, cut to size.

couldn't separate the gun from the Pedestal and then replace the gun without the Pedestal?

@MJR-Reviews

Жыл бұрын

That's the next step! I don't have very good skills with 3D rendering so asking a friend to help out. Then I just need somebody to help me with the 3D printing 😄

You could make a 3d printed logo and place a magnet in the central circle of the base and inside the central circle of the barrel to be able to exchange them easily

A third party should make seats or a Thundercats emblem to replace that cannon hole.

@MJR-Reviews

Жыл бұрын

That would be awesome but for now I got to figure it out on my own 😁

You could paint it like a silver color and try and line up the holes from the bottom and mark them and then put the screws back potentially from the top, not sure if that would work or not. Then get a thunder cats logo sticker and place it on there, doesn’t have to be too big. Or go matte black and paint the tops of the screws too. Just an idea

I hope someone with 3d printing skills watch this video and come up with a bolt on solution for the cannon which includes two extra seats.

@MJR-Reviews

Жыл бұрын

I'm working on a new solution but because I don't have very good 3D rendering skills it's taking a lot longer 😅

It looks like they had a very specific time and budget for engineering and that was the part that got the least amount of attention. Just by looking at it I get a cluster of better design ideas. In it's current state I would fill in the gigantic round pedestal with thin relief Cats emblem (3D modeled and printed). Lengthen the telescopic shaft (only slightly thicker at the bottom vs the top) For the action figure feet, keep it super simple. Imagine the look of flat wooden ice-cream bar sticks. They are connected to the central shaft, like the hand of a clock and are able to pivot, directly over one another - with pegs of course.

Instead of screwing the turret back into the base, you could just use magnets to make it easily removable and keep it in place if you want to put it back in.

They might sale Thundercats logo for cars in a circle shape.

@MJR-Reviews

Жыл бұрын

I think they do but nothing in this size 😅

So it went from a thunder tank to a thunder minivan.

@MJR-Reviews

Жыл бұрын

Well the ThunderCats need to get around somehow 🤣

This was cool. But.... Now where are you gonna put the gun?

@MJR-Reviews

Жыл бұрын

I'm gonna try and remount it with a new plate

Bad design. It should have been collapsible or removable when not in use. But for me the highlight was the Soul of Chogokin Robots. Need more videos of those ;)

Lyin Brian said it was supposed to be Removable just like he said the tank treads would be individual pieces. 😒

@MJR-Reviews

Жыл бұрын

I don't ever remember him saying that the canon was removable. If he did he has a lot of explaining to do LOL 😅

@rupturefarms21

Жыл бұрын

@@MJR-Reviews Why does nobody ever remember any of the important things about all the lies false promises that guy and his company makes? He litterally says it in the super7 promo video @2:10 a "REMOVABLE swiveling 3 gun turret". He also said it and demonstrated it in another interview when he first showed the prototype to pixel dan. It's like im the only one paying attention to anything and then get called a hater or unreasonable for expecting what was shown and what was promised as a paying customer. kzread.info/dash/bejne/Z6GYrKdqqc2qqps.html

@ultramag0343

Жыл бұрын

@@MJR-Reviews He did say that the pedestal was removable ! The problem also is that none of the youtubers that interview him never question him on these issues. They smile and tell him he did a fantastic job and that's it 🤔

You just wreaked a $500 toy? But to each is own I guess. 😮

Where are the electronics for a toy of this size...near PERFECTION ?? Do treads move ?? Stupid 7 could of done a wayyy better job ...oh Jay don't hurt yourself lifting da tank .. heee

Maybe someone can 3D design/print a better base?

@MJR-Reviews

Жыл бұрын

Yep looking at that with one of my friends. It's coming along slowly, but we'll figure something out soon!

I wanna send you a picture of what i did but i dont know how to send it to you. I want to know your opinion.

@MJR-Reviews

Жыл бұрын

Sure you can send me a PM on my IG @megajayretro

@elmerbalingit6400

Жыл бұрын

I dont know how to use my instagram or my twitter account. 😢

@elmerbalingit6400

Жыл бұрын

How about your email or Facebook or FB Messenger?

@MJR-Reviews

Жыл бұрын

Ok look up Mega Jay Retro on Facebook you can send me a PM on my page 😁

Way too expensive and laug I able at first. Broke down and bought this week. Figured itd drop in price to 350 or less.....but 375 on Amazon and a moment/day of weakness.

Grown man doesn't have a screwdriver, considers undoing four screws to be a side-project, and thinks this is a customisation. Yet makes a long video about it... Was like watching a toddler try and put the square block in the round hole.

⚡️⚡️GREAT STUFF⚡️⚡️I’m glad I found your channel I look forward to seeing more of your videos📺 I do mostly TRANSFORMER Stop Motion 🎬📸🎞️ I hope you enjoy my animation‼️ 15:45

😪 "promo sm"

I’m laughing so hard watching this drama queen using a simple screwdriver. 😂😂😂😂😂

@MJR-Reviews

Жыл бұрын

Damn it Jim!!! I'm a graphic designer not a mechanic!!!

There’s no fixing any flaws with superstupid7 that company in itself and it’s oversized ancient engineering is a complete flaw