Lol! literally laughed out loud at your pirate joke!

@eazywastaken

3 жыл бұрын

I did too lol

Wooohhhooo Wynona is back!!!! Nice fixes brother. I have been thinking about getting one for awhile now.

Absolutely Hilarious!!! All of that for 2 minuets of glory before you lost your nut 🤘😂🤘

On the issue of tires being hard and stiff I spray WD40 on the tires and let it soak in. It softens the rubber and helps with traction. I enjoy your videos and use Holmes Hobby motors in most of my crawlers. Thanks John

@old-rcplane-phart

3 жыл бұрын

Also, wd40 every rtr plastic arms on ANY rtr u get. Makes the plastic give, not break. (I've done that for 40+ years!)

@agoodballet

3 жыл бұрын

Liquid wrench works good too. I also use Simple Green to make em sticky.

@agoodballet

3 жыл бұрын

BTW that’s a track day tip. Some tracks won’t let you do any tire dressings but they’re out there. I prefer liquid wrench and Simple Green for my tires though.

9:15 I swear you gotta be diiiii-rectly related to the late Bob Ross, cause that is the most Bob Ross phrase I've ever heard. LOL.

Hey John, I've had a smile on my face for most of the video !! 👍 You are definetly funny ! I look forward to your videos, but they only happen once a month, but I know you "R" probably very busy. 😂 Nice to know there is some creative life forms out there. -Thanx a million X !!

I just had one of my rod ends pull out myself on my Gatorkeeper last night . I call my rock racer Gatekeeper, Gatorkeeper , because it’s in a hurry to gator spin right on its lid without paying strict attention!! Time for weight down yonder.😝

Hi John I got replacement parts too from Redcat, I jumped over a dune and landed on a stump popped the glue on the tires too so I got aluminum beadlocks, I just use needle nose pliers on pivit balls arrrrr lol 😆 always entertaining and educational see ya next time 😎👍

Redcat actually has an amazing warranty and customer support system. My gen 8 had a ton of issues that were basically user error but Redcat was willing to replace anything that I broke, axle parts, transmission parts, etc. they don’t ask many questions they just replace whatever part number you send them.

@agoodballet

3 жыл бұрын

Google User I agree and since that Redcat has been repaired it was sold as soon as the parts were delivered. I didn’t even bother fixing it. I too own several different brands and have several custom competition rigs and not one of them have redcat products on them. It was a cool rig to start off my addiction because it taught me that things do break and that fixing them is a huge part of the hobby but luckily since I ditched the Gen 8 I haven’t had to “fix” so much and have time and money to upgrade. Maybe because the rig I had was so new and it broke within a month and that’s why they were willing to help me but I understand your frustration and have seen it all okay out on Facebook since I was a member of those groups and saw them literally deteriorate.

Some shock shaft pliers have a spot for installing/removing pivot balls

@KTMcaptain

3 жыл бұрын

Is that what that leather punch looking thing on it’s for? Ha, learn something new every week.

@Darwin.B

3 жыл бұрын

@@KTMcaptain it might be, if its in the middle, if its near the ends its a punch for venting tires

@KTMcaptain

3 жыл бұрын

Darwin Bohnke it’s in the middle. No way I can get a tire in there for venting though. I thought that’s what it was for originally.

I still use that same little t-wrench that came in my Tamiya Blackfoot kit when I was a kid in the 80's. Never goes out of style.

3/4 ugah dugah, got it 👍

IT'S COMIN' RITE FOR US!! 🤣🤣🤣🤣🤣👍👍 Was waiting to see Jimbo shooting at the 'dingo! 🤣🤣 Awesome vids on the Wendigo. Prob be my next kit. 👌 liking my gen 8 alot too. Cheers ✌

The pirate joke ha ha good one

ARRRRR!!! Sometimes you remind of a mix between Bob Ross and Mr. Rogers combined with an excellent sense of humor, lol

The Twisted Hexes sounds like a great rock band!

my wife hates when i say "uga Duga" lmao great video John..

Indica or sativa?

@jeremyroberts4455

3 жыл бұрын

You should never make someone choose between one or the other thats just cruel.....lol

@ekpauly

3 жыл бұрын

Its good whatever it is.

1/2 Ugga Dugga....🤣

The shock pliers I used are from Tekno, I wish I would have bought them years ago, and I cant wait to get one of those 4100 R motors for a build I'm starting soon

On the subject of loose nuts I had an old scx10 that always came loose so I put an extra nut on the axle stub. After that I never had another issue.

I have a shock pliers set from amazon just a cheapo but works great, also have learned that the axes are same width as ar60s so I swapped for incision wraith steering link, I personally don't like the steering link set in the steering link, i like it on the hub

OMG,, I couldn't even watch the end. For I was laughing so hard,, at all those nuts,

Love your videos! Loose nuts, lol... You should watch my Wendigo squirrel tag video, that left front wheel nut... With blue locktite even... 😎

I would like to put the Wendigo body on the Gen8 II.. That would be pretty cool..

Shock pliers have a ball end tool built into them. I borrowed a set from a friend while doing my SCX10iii. After that I had to buy a set.

Tekno makes some shock shaft pliers that have a ball end tool built in its sweet

The spinning hexes happens with the factory power on 3s! Definitely have to change the wheels.

@josephweisenberger1379

3 жыл бұрын

And the tires come off the bead from the factory also

@josephweisenberger1379

3 жыл бұрын

Wheel nuts on this rig always come loose all these problems have been on stock power with 3s

Dynamite also makes an e-clip tool too

Gotta love that end... Why do I have an extra nut in my hand. Lol

Your wheel nut wrench. The rod end. A hex driver to slide into the ball. Tap the rod end on or off the pivot balls.

So if I get the wendigo kit the stripped steering links shouldn’t be a problem if installed correctly?

Finally this dude fixes his winnona dingo... 🤣

John hot racing and others make a shock shaft pliers with a ball end remover installer

I enjoyed a great video let's be friends.👍👍 우리 친구 해요!!

On the wheel nut situation, I start with 2 rigs and go home when I've lost 5 nuts. Why do some rigs never have that problem?

I like the looks of the Wendigo but it's my most problematic RC....It always needs repaired or replacement parts....

Castle 3800kv slate /mamba x + j concepts firestorms. Lasts 30 seconds at a time on the passenger side, literally rips the wheels right off the truck. but got 2 aluminum hubs yesterday, maybe it won't instantly strip the hexes......monster truck seem to have a shorter lifespan than my crawlers...... Only 12 rigs/ 5 brushless bashers /crawlers/drag/ drift........i got a problem.

@johnunderhill6672

3 жыл бұрын

Hey Ryan... This Underhill has an RC problem too! 14 crawlers, 3 -1/16 , 2 - nitro , 1/2 dozen another 10 scale trucks........... Oye! ~;+}>

To be honest Mr Holmes I was kind of scared to look up "ball pliers" on the internet. Next thing you know my emails would be inundated with all kinds of crazy "tools"

Hey, so I watched your video and my hub nut is always coming loose you said blue loctite how bad will that bite me in the long run? And I did a 4pcs beadlock wheel change and beefier hub swap and I broke what I believe to be my front cv stud? I’m new to the rc world and was wondering if you could do a video short video on how to change this? Or access it?. I also am driving the wendigo! Thanks

i put 8 fling king jr 2.6 tires with Krimson Dual Truck Wheels, sidewinder 4 esc and putnam 27t motor , 2s new wave batteries , raw 500 servo , integy piggyback shocks , Flysky G7P controller , Integy RC Model C29935SILVER Complete Front & Rear Axle Conversion Kit for Axial 1/10 Wraith . at the time i didnt no about you so i tossed the putnam motor in it . so now that you no what this build has what motor would you put in it ?

My hex broke the wheel on my redcat gen8 the first time I took it out. I love the truck but redcat really needs to change the wheels they use.

I need a pair of Ball Poppers to get my Wynona Ryder up to speed *=*

Do you tighten BOFA?

"Sometimes, you eat the bar. Sometimes, the bar eats you."

Manufacturing torque spec -- 3/4 Ugga dugga. LOL!

"Ritz of the Ozarks"?

John, about your shirt. Maybe a little too much 4 way windowpane, eh?

@HolmesHobbies

3 жыл бұрын

6 way. my brother makes the shirts

Shock and Pivot ball tool made by Tekno May make life easier🤔 Part#TKR1115

Best be careful with those nuts bud😂

Ball pliers 😂

Shoulda put a ball pliers hashtag in the description... Just saying

My opinion on redcat is that their vehicles have a few quirks and then they’re ok

Hi iam Jonny WEEKEND IVE JUST GOT IT TO RC I HAVE EVERRST 10 I LISTENED TO YOU BIUT YPUR TO SMART ABOUT MOTOR AND GRARS BIT I WOOD LIKE TO LREAN MORE FROM YOU PLUS I HAVE A BIG ROCK TTACK OUTSIDE TO YOU GREAT TO LISEN TOO BUT FAST AND YOU GOT A FRISSBEE GOLF NET IN THE BACK YARD YOU CANT BE THAT BAD

👍🏽🐒🇺🇸

Dont feel bad it took me 30yrs of rc before I bought either tool

Need more uggadugga

@HolmesHobbies

3 жыл бұрын

i put 3/4 ugga dugga on there! 1 is too much according to the manual

Loctite

Too, HOW in the world does a famous motor building, technical, rc dude NOT have "ball link pliers"?!?;?;

@HolmesHobbies

3 жыл бұрын

probably the one tool I don't have!

@HolmesHobbies

3 жыл бұрын

I have some ,but they were not at the hobby house. Wasn't expecting to lose a nut!

@old-rcplane-phart

3 жыл бұрын

@@HolmesHobbies I so hate when I lose, or blow a nut?!

Tekno RC Pliers.

How do we spell ugadugga?

I just hand them to my wife and she puts them back in her purse.

I’m just a 🐿 tryin’ to get a 🥜

Anybody make any books on this hobby of ours.

@johnunderhill6672

3 жыл бұрын

KZread makes a great book! ~;+}>