Did mine a few weeks ago.. now I have no oil leaks at all at 280k miles.. gotta love a Toyota!

I've been needing to do this very same job to my Limited for about 8 months. Thanks for the run down it actually doesn't seem that bad to do.

Can’t get enough of this guy

@boebra2276

3 жыл бұрын

👌👍

Austin that is one fine video. It is especially good for someone like me who is a mechanic who does not normally work on Toyotas. The beauty of your video is the almost total lack of redundant chatter. There are other videos which are also good but yours covers the bare bones concisely and rapidly. Thank you!

Very fun job. I had to do mine twice due to over tightening the valve cover thus cracking it and causing it to leak oil haha...brings back memories.

@waverider5751

Жыл бұрын

Whoa! You cracked the cast aluminum? Dude! That’s TIGHT!

This was awesome. Thanks. I have the same 4runner. Discovered the same thing about having to manually move the door locks to enter programming, way back when!

I avoided this job because I just couldn't never find the time. One night while changing the oil I decided to take 1/4 drive and try to tighten the valve cover bolts, it solved about 90% of my problem. Love your channel.

@stevanrose7439

2 жыл бұрын

My valve cover bolts were real loose to I’m gonna try to tighten them up a bit.

@billybadass9031

2 жыл бұрын

You're a champion. Sure enough I'm doing the same job right now from your info. Thank you.

@billybadass9031

2 жыл бұрын

My outside valve cover bolts were loose. The inside bolts were fine. Ever since I did that, no more smoke at startup, no more oil in my intake system. No more having to constantly top off the engine oil. I've been looking on Toyota forums for months and just randomly finding your comment put some extra life in my 276,000mi 2001 4Runner.

@thepitpatrol

2 жыл бұрын

@@billybadass9031 glad it helped. We have 2. A 99 with 405,000 and a 2000 with 375,000. They are amazing vehicles.

@ohsnapsitzjustin

7 ай бұрын

Did u take fuel rail off to tighten the top bolts?

You made it look Easy. With the base stance and height the Toyota’s are a lot easier to service. I hate standing on a stool and leaning over a engine compartment. I’ll be glad to see the warm weather come back.🌞

@Z-Ack

2 жыл бұрын

Yea and i thought a 6” lift was gonna be a good idea.. now my short ass has to mount the damn motor to do any work on it on top end.. under i can sit up straight and change the oil.. so theres that.. plus i can drive over top of a prius so theres that also..

Toyota is so simple and I love it 🥰

Am needing to replace fuel injectors and your video showing the removal of the plenums made me less intimidated to remove them. Thanks for the clear view while doing your work.

Great video!!! You make it look easy. About the locks: before you replace the actuators, take the door panel off and spray all the interior mechanisms with spray lithium grease. It solved the issue for me. It might save you the trouble and expense.

Ive been putting it just because ive been busy , but finally picked up the knock sensors also , finally going to do this on my 96 sr5 5speed with 360 k on it, truck still runs like new

I got my 00 Limited in 2018 with 203k miles and is been great. I did a lot of preventative maintenance but these old girls are worth it. Another thing I recommend is checking the driver s side CV shaft at the differential for some play. The driver's side CV shaft is supported by a needle bearing at the differential and they go bad. EAST Coast Gear Company makes a coated bushing that replaced the needle bearing and it's not expensive. The passenger side CV shaft is supported by a ball bearing and doesn't fail as soon as the needle bearing. Buying Toyota factory parts is actually very reasonable when bought through Camelback Toyota or McGeorge. Also, don't be surprised if you need to do rear axle seals soon. I highly be recommend buying a Harbor Freight presses (if you don't already have a press), the appropriate press fixtures and doing it yourself. It's not hard and most shops will probably fail to do it correctly. A local garage failed three times with mine. I did once and successfully fixed it. Do it yourself.....

Nice !!! ( I did this for my 2004 3.3L V6 Toy. Sienna AWD and it was a pain in the Butt, but 100% do-able just factor in 3X the time over the 3.4 mounted more inline)

nice video! i would of given that throttle body a good clean and replaced the gasket while it was out. It can make a big difference in smoothness. thanks for the video!

Your videos have helped me so much with the rhino liner

I'm loving the 4Runner and what you are doing with it.

I just bought a factory 5 speed 99 4Runner, great trucks! Looking forward to seeing a little more of this one!

@austinniemela

3 жыл бұрын

Hope you enjoy it!

found a small leak on my first gen last week, perfect timing on this video

Exactly where my 3vze was leaking - rear cam shaft caps. Had been overlooked.

Probably one of the best channels for Toyota maintenance things

@austinniemela

3 жыл бұрын

Thank you!!

This is very helpful since I'm going tomorrow to look at a 98 limited in Washington State... pretty sure I'm going to buy it no matter what...

Awesome! Thank you! Moving that air-intake thingy actually seems more complicated than changing the spark plugs! :/

Saving this video for a future project...Thanks.

@austinniemela

3 жыл бұрын

Awesome, thank you!

When I do my 3.4 swap into my truck this is one of the many things I will address before the install.

Just did it on my 99 last Friday. 190k miles so far. Just bought the truck 2 weeks ago. Wasn’t hard but the plastic on the harness was very brittle a lot of it broke off

Great video and music...had me grooving

Love these Toyota videos! The previous owner had the timing belt replaced. Not sure why they'd go that far into a repair and NOT replace the valve cover gaskets is beyond me.

@stevanrose7439

2 жыл бұрын

Tho it may seem like you could just change those gaskets but the timing belt and valve gaskets are two different animals. Not that hard but a good task.

@efil4kizum

Жыл бұрын

probably were NOT leaking at that time?

@thescottishhammer7570

Жыл бұрын

@@efil4kizum you're probably right, but it would make sense to me to go ahead and replace them, leaking or not, since I've already got the top of the engine taken apart.

@FernandoDenise2558

8 ай бұрын

There is no labor overlap between valve cover and timing belt, I can't think of a single thing that you'd remove in both of those jobs.

@thescottishhammer7570

7 ай бұрын

​@@FernandoDenise2558gotcha. Makes sense now.

Yup I'm going to do mine too thanks for the video ✌

@austinniemela

3 жыл бұрын

No problem 👍

PCV valve has been bad for a while. Quite a bit more varnish staining and grime under passenger valve cover. Great video.

@austinniemela

3 жыл бұрын

I noticed that!!

Great Video! would you mind listing the torque specs for the engine bolts?

Starting to become my favorite channel

@austinniemela

3 жыл бұрын

Im glad you enjoy it!! Thank you!

Great video, i gotta do mine again. Mine are leaking all over my headers.

Dude you are superb...A friend and I attempted this but now were getting coolant in the oil...Any suggestions?

Great video and you made it look so easy. Notice your using non OEM parts? Are they just as good as Toyota?

I noticed you did not put sealing on the manifold gaskets, i assume they don't need seal then, i will do the exact same job this weekend, great video, thanks.

Thanks for the videos bro.

That's my summer project along with the timing belt and water pump.

Man if I had a shop like that I would do my valve covers too.

So funny you're posting this. This weekend I plan to replace the valve gaskets on my 2003 Tacoma. Love the content!

@austinniemela

3 жыл бұрын

Right on!

every time i watch your vids i start to want a Toyota of my own lol. right now i have Chevy, Ford, and International. you can never have to many vehicles right??!! haha

I was just about to do this job and used your Ebay links. Thanks

@austinniemela

3 жыл бұрын

Awesome! That stone kit on eBay is CHEAP!!

@wfyfwfyf

3 жыл бұрын

@@austinniemela saved me a lot of money that's why I was putting it off

I've been wanting to do this to my Tacoma... You didn't record the tough/tricky part though 😳. I'll get'r. Thanks for the video

@edpoints1127

3 жыл бұрын

Do you have any suggestions on where to get the OEM kit for the timing belt "kit" Idler pulleys, belt, water pump, thermostat... Etc

@-LFATV

3 жыл бұрын

@@edpoints1127 rockauto.com

Great vid 👌 thanks

Great video!

This is my next chore on my 2003 Tacoma.

Thanks for the information I appreciate your video

@h.j.s.j.1801

3 жыл бұрын

Hey can u make small video how you program the lock control and anything you do for locking the doors

Awesome engine. One of the best Toyota ever made. 4Runners are made in Japan. Tacoma now made in Mexico

Yep, my 02 with 260K leaks from the Valve Covers all the time

I appreciate i can follow devin for my car/evo x needs and you for my toyota/4x4 needs

what brand do you recommend for "half-moon sealant"? great videos ;)

what brand of sealant are you using for the half moons in the back? Do you possibly have a link or a previous video with a link for the sealant?

Most underrated channel on KZread

Good information!

Austin, hello. Watching your valve cover vid. What sealant did you use on the 1/2 moons and cam caps? You mentioned using it but never said what it was and where to get it from. I don't want to use silicone sealer if possible. Thank you sir, I'll post videos of it soon. Regards and Respect!

If you do a head unit on the raptor liner truck, can you do a video on wiring and fitment? I’m having trouble finding any info on wiring. Thanks

Great, how often you recommend to change valve cover gasket ?

Man, I sure miss my 01 4runner limited 4x4.

I’ve a vacuum leak cause check engine lites on. Any tips on trouble shooting. I had check the obvious hoses and found 1 cracked and 1 loose above the timing belt covers.

It looks easy on the video but I wouldn't want to be the one doing this on my 4 runner because of having to remember everything you took off has to be connected again I might forget or miss connecting a wire and there goes check engine light but your video is still cool.

You are the man!

Absolutely insane how KZread algorithm works. I was literally just talking earlier today how I need to replace the VCG on my 01 4R and BOOM this video pops up on my feed soon as I log in. Only question I have is, what is the name of the circle gasket seals on the back of the heads so I know what to order, and what kind of sealant are you using on the half moons?

@austinniemela

2 жыл бұрын

I bought the stone kit and it came with those rear seals I believe! I used ultra black rtv!

@cmart9240

2 жыл бұрын

@@austinniemelaThank you sir. Was already planning on ordering a kit this weekend, might have to explore the stone kit and see if those circle gaskets come with it or not.

Any reviews on the Stone kit brand ?

Do you need to torque the bolts for the seal?

great vid!

Great stuff man, I have a question. My 99 4runner shifts hard into reverse a lot. It sometimes won’t do it when I step on the throttle before going into reverse. Any ideas on what it could be, thanks in advance

@Z-Ack

2 жыл бұрын

Your windshield washer fluid is low.. does it every time..

What youtube video did you find for the key fob programming.

now i know why one of my spark plugs has oil in it loll thanks for the great content

@austinniemela

3 жыл бұрын

That will do it!

Hey I ordered a cheap gasket kit but the cover gaskets were all folded up in the bag it came in- think thatll be a problem? Rubber looks and feels ok

Austin could you do a video of how you fitted the LED headlights on the red pickup. I bought the same ones and they're not a direct fit

@austinniemela

3 жыл бұрын

kzread.info/dash/bejne/lm1oypWwl5OoqLg.html

No torque wrench for the cover bolts? I heard the factory specs are a bit much and can crush the bolt seals? How did you go about tightening those bolts?

Can I program the remote with out the original chip key or the original key fob?

hi i bought a 97 t100 with the 3.4 for some reason someone put stop leak in the coolant system how can i tell if this has a bad head gasket there is nothing in the oil it doesnt put out white smoke the guy said he changed the radator what would he have put stop leak in it if you can answer this Question

What are you using to clean the covers?

It would be interesting to know how much your projects would approximately cost to have serviced by a mechanic aswell as how long the job is estimated to take .... im so impressed with your skills .... keep up the content ....

@austinniemela

3 жыл бұрын

Thanks! Probably would cost alot!! Most mechanics arent cheap

@hankhill3417

Жыл бұрын

$600

@josepliego5514

Жыл бұрын

I just got a quote for this very job at my local Toyota dealership…$1300

@efil4kizum

Жыл бұрын

@@josepliego5514 WOW! that is a lotta good coin! what area of the country are they wanting that much? my local yota dealershop did this in 2o19 for almost 600$

@roofermarc1

10 ай бұрын

How long would it take for an experienced hand to do this job? If you do several of them back to back you'd be pretty quick and I'd imagine it could be done in under 4 hrs? That's just a guess. It will take me a weekend to get through it.

The new valve cover gaskets compress over time and require tightening the covers. All but two bolts can be reached without removing anything.

I really need to do this to mine.....

What is the tiny vacuum line between the upper and lower plenum?

I sure would love to own this black beauty

My only question did the rear window button on your remote work ???

I’ve seen your folding Costco work tables for a while and hey hurt my back watching you work on them. The bounce is kinda comical but prob annoying. You should build a solid higher table on casters so you can roll away and still have room. You probably willing to sacrifice the flimsy low table for the storage space. Anyway would be a cool little project for a video. Keep up the good work.

Hello, I want to know the torque of the screws that I have to use, if you let me know I appreciate thanks

man that is a clean 4runner

@austinniemela

3 жыл бұрын

Getting there!

Hey me Toyota amigo, would you kindly tell me where is the EGR VALVE in this specific model? The idle on my Toyota is very high and the computers says EGR VALVE

I was told mine didnt come with a keyfob ... are all models programable?

is the timing belt job hard?

quick question if the half moon is really tight even using pliers and channel locks doesn't help, do i need to replace them at all?

@philippinelife712

4 ай бұрын

I've done a bunch of these and I've never seen half moons that leaked. Never messed with them. Those black round caps leak horribly though. That's where your oil comes from. Don't use rtv. Get Right Stuff formed in place gasket maker that's ready to use immediately. Put it all around the round thing and install.

Do you know if it's the same way for a 2003 Tacoma for the key fob programming?

@austinniemela

3 жыл бұрын

I’m not sure! Google knows!!

@victorguajardo7619

3 жыл бұрын

Will do thanks, like your videos keep up the great work, I cant stop buying Toyota's too lol

I know someone already mentioned it but the torque specs on the valve cover bolts are only 53 inch lbs (4.4 ft lbs) which is barely anything. Figured I would mentioned it since I cranked mine on and cracked a corner :(

@austinniemela

3 жыл бұрын

Yes i might have gone a touch on the tight side!

My valve cover gasket bolts were RIDICULOUSLY LOOSE. Especially where the oil leak was. Seems to be a common theme. Check them first, but don’t overtighten🤙

OG 5VZFE here... the VCG first wept at 114k miles... small weeping around the bolts are now popping up 225k miles later after a re-seal ... also weeping in back by fireWall

@efil4kizum

6 ай бұрын

bot the OEM gasket from yota parts dealer recently (online sale)... it is Made in VietNam fwiw and Not Japan

@jb-vz4wb

3 ай бұрын

YEP i was surprised, some OEM stuff is not made in Japan now, they have switched supplier. I bought new Toyota spark plugs​, they needed the first thread cleaned up before they would thread in by hand@@efil4kizum

This is a beautiful SUV that was made by Toyota. Still look great today as a driven vehicle. And the durability is awesome when taken care of. Great pick for a family car. #TOYOTA

Yes I always switch my Toyota terminals over to marine terminals

should get a copy of Techstream. makes replacing keys and fobs alot easier. worked great with my Lexus GX when i got a new key for it.

@gregh7457

3 жыл бұрын

which odb2 cable are you using for techstream? i really hate having to buy all these damn different cables for each car. I probably should buy a Carly

Intake Manifold Gaskets link is not working

What kind of issue does this present? I know mine are leaking, but everything seems to be fine.

You get new cam caps or reuse old ones with rtv on em?

@philippinelife712

4 ай бұрын

Use the old ones. That's the source of your leak though. Use Right Stuff FIP gasket maker around the black round caps and reinstall.

New subscribers here...sweet video

@austinniemela

3 жыл бұрын

Welcome to the channel and thank you!!

How much would this be to have done in a shop

How have those stone valve covers been holding up ?

@austinniemela

3 жыл бұрын

No leaks yet!