Fixing oil leaks and replacing bearings on final drive of my JCB Loadall 530B. Fitting new tyres while wheels are off.
Жүктеу.....
Пікірлер: 21
@robertjones53884 ай бұрын
Good vid,thanks. I also have a 530b 11m that we bought for our new build, saved so much work and labour! Their absolutely cracking machines,looking forward to seeing the next vid on it.
@StevenRobertTaylor
4 ай бұрын
Thanks! Yes these machines are so useful. They are heavy no doubt, we have a personnel cage which my father and I built that we use quite alot. I have started filming the repairs to the rams but haven't finished the job yet! Thanks for watching,
@andrewbrenneman9592 Жыл бұрын
I remember as a kid standing on the bar for dad to loosen lugnuts. That is King Kong & Godzilla tight.
@StevenRobertTaylor
Жыл бұрын
Haha! Yes they were tight alright. I'm 18st and that was a 5 foot piece of box section steel!
@pierluigiantonella Жыл бұрын
Complimenti un bellissimo canale 👍
@AlwaysBored123 Жыл бұрын
Thumbs up for putting a snap ring on with your thumbs.
@StevenRobertTaylor
Жыл бұрын
The things you have to do when your circlip pliers were in the other workshop 😂
@nickhill3362 Жыл бұрын
Good old machine definitely worth looking after I have a 530b 7meter
@StevenRobertTaylor
Жыл бұрын
They are great machines, heavy on the ground though if you're moving about the yard.
@nickhill3362
Жыл бұрын
@@StevenRobertTaylor recon it could be a aluminium valve that has cracked on your tilt ram Steve
@StevenRobertTaylor
Жыл бұрын
Would they not be steel blocks? Guess it is possible, I'm hoping it is an old hose end leaking or a blown seal on a bung or something easy to fix
@nickhill3362
Жыл бұрын
@@StevenRobertTaylor on mine it was definitely aluminium and cracked I couldn't find a a used one and JCB didn't do the part or it was mega expensive so I had a guy repair it I hope this helps Steve
@StevenRobertTaylor
Жыл бұрын
That's very useful info to know thanks, will pay close attention when I get it out. We had the ram resealed years ago so seems to be all good around the rod seal
@williamweller7428 Жыл бұрын
3:57
@StevenRobertTaylor
Жыл бұрын
Yeh?
@fullblown3876 Жыл бұрын
Did you buy her in Scotland😉 love the videos,👍
@StevenRobertTaylor
Жыл бұрын
Hi, no we got her locally many years ago, thanks there will be more in the pipeline, very useful machine
@nightstorm9128 Жыл бұрын
That's rust inside that planetary,,that's how long it's been since it had clean oil,,also it looks like there's no gaskets anywhere on it as well,,,it amazes me how people would rather pay many thousands of pounds to replace a part rather than spend 20 on new oil....
@StevenRobertTaylor
Жыл бұрын
Yeh we should probably have changed the oil in them a long time ago. Will get the other side done soon on the next run of maintenance
Пікірлер: 21
Good vid,thanks. I also have a 530b 11m that we bought for our new build, saved so much work and labour! Their absolutely cracking machines,looking forward to seeing the next vid on it.
@StevenRobertTaylor
4 ай бұрын
Thanks! Yes these machines are so useful. They are heavy no doubt, we have a personnel cage which my father and I built that we use quite alot. I have started filming the repairs to the rams but haven't finished the job yet! Thanks for watching,
I remember as a kid standing on the bar for dad to loosen lugnuts. That is King Kong & Godzilla tight.
@StevenRobertTaylor
Жыл бұрын
Haha! Yes they were tight alright. I'm 18st and that was a 5 foot piece of box section steel!
Complimenti un bellissimo canale 👍
Thumbs up for putting a snap ring on with your thumbs.
@StevenRobertTaylor
Жыл бұрын
The things you have to do when your circlip pliers were in the other workshop 😂
Good old machine definitely worth looking after I have a 530b 7meter
@StevenRobertTaylor
Жыл бұрын
They are great machines, heavy on the ground though if you're moving about the yard.
@nickhill3362
Жыл бұрын
@@StevenRobertTaylor recon it could be a aluminium valve that has cracked on your tilt ram Steve
@StevenRobertTaylor
Жыл бұрын
Would they not be steel blocks? Guess it is possible, I'm hoping it is an old hose end leaking or a blown seal on a bung or something easy to fix
@nickhill3362
Жыл бұрын
@@StevenRobertTaylor on mine it was definitely aluminium and cracked I couldn't find a a used one and JCB didn't do the part or it was mega expensive so I had a guy repair it I hope this helps Steve
@StevenRobertTaylor
Жыл бұрын
That's very useful info to know thanks, will pay close attention when I get it out. We had the ram resealed years ago so seems to be all good around the rod seal
3:57
@StevenRobertTaylor
Жыл бұрын
Yeh?
Did you buy her in Scotland😉 love the videos,👍
@StevenRobertTaylor
Жыл бұрын
Hi, no we got her locally many years ago, thanks there will be more in the pipeline, very useful machine
That's rust inside that planetary,,that's how long it's been since it had clean oil,,also it looks like there's no gaskets anywhere on it as well,,,it amazes me how people would rather pay many thousands of pounds to replace a part rather than spend 20 on new oil....
@StevenRobertTaylor
Жыл бұрын
Yeh we should probably have changed the oil in them a long time ago. Will get the other side done soon on the next run of maintenance
John that's what you get buy Mahindra tractor.
@StevenRobertTaylor
Жыл бұрын
? This is not a tractor..