Thank you so much! Great video! In my case it was the pressure swtich. If only I had listened to this video before ordering the heater relay (that can't be returned)

@rogerscubadiver

2 ай бұрын

It was a difficult choice for me too Paul. I was 90% sure it was not the heater relay because I had already checked it was working as expected. My rationale was that once I have the dishwasher all taken apart, i didn’t want to do the job twice and waste another weekend so ordered both parts. On the plus side, you and have now have a spare heater relay in case that part fails in the future :-)

Just wanted to say a hearty thank you for taking the time to post this. Had the exact same issue and you saved me hundreds of dollars in repair fees. I was able to find both parts on ebay and am now a happy guy with clean dishes! I should add that I was only getting the F24 error but the issue was with the pressure switch, not the relay as indicated in the technical manual.

@rogerscubadiver

Жыл бұрын

That is awesome! Amazing how much $ one can save with a little bit of info.

Great video helped me with mine!

Just replaced the pressure switch ($100) and that fixed the F14 error. 🎉

@rogerscubadiver

5 ай бұрын

That is fantastic! Thank you for sharing!

Congratulations! Happy washing. I'm sure you will not miss the handwashing.

@rogerscubadiver

Жыл бұрын

Ha ha. Indeed. I’m on the second dish washer cycle now. :-)

@rogerscubadiver

Жыл бұрын

@rmariu check this video for confirming my pressure switch was faulty: kzread.info/dash/bejne/ZZir18WOZZbgl8Y.html

@rmariu

Жыл бұрын

@@rogerscubadiver I wonder if moisture had gotten to the contacts inside? kzread.info/dash/bejne/X46N1pSfYa7NnZc.html

@rogerscubadiver

Жыл бұрын

@@rmariu I think you are right. I put the switch in the freezer for about 20 mins and I couldn’t depress the diaphragm anymore. It was solid . Something was blocking its motion. I then let is thaw out and now it moves again. It is still faulty but it is only measuring 1-2 Mohms instead of the 7-8 Mohms from before. I’m tempted to cut it open to verify

@rogerscubadiver

Жыл бұрын

@rmariu, I dissected the switch and it does appear that there is a small amount of moisture inside. kzread.info/dash/bejne/q5eZqdhqg7TSmZs.html

Hello great video in my miele dishwasher i have a red Light from intake water sign and it doesnt start the program Just hear some water comes and then stop. I check many things is it possible to be the water pressure switch.. Many thanks

@rogerscubadiver

Жыл бұрын

Hi Patriot. It is hard for me to give you tips based on this description. One, it sounded like a different DW model than mine, which has an LCD and displays a diagnostic code and beeps. If your DW only has LEDs, they would have a way to flash or display some sort of diagnostic code using only LEDs. My recommendation is to google your DW model and “technical manual” to understand how codes may be display and what they mean. From there, the manual will give you some tips on what could be going on. The electrical diagrams, while difficult to understand at first, are valuable in finding which components to examine. See all 4 videos I have posted in my DIY channel on how I diagnosed and fixed my issue. You will have to go through something similar for your DW

Where u got your water pressure part?

@rogerscubadiver

Ай бұрын

From the Miele USA website

@rogerscubadiver

Ай бұрын

Read the description in this video