Here I fix an issue with the EPB or electronic parking brake in a 2004 audi a8l
Жүктеу.....
Пікірлер: 67
@wiseoldman5841 Жыл бұрын
Nice work. After the dealer couldn't fix mine..04 A8, the controller under the battery shorted and started a fire. The unit was made in Malaysia. A pile of plastic and charred wires. The service guy said it only controls the brake, so i just cut it off. No more parking brake! Btw, you can easily remove the electric motors on the caliper and unscrew the parking brake so you can replace the pads. They always put extra parts on cars...
@Veikra
Жыл бұрын
Dealer couldnt fix a leaky faucet. You need a independant guy. You can use a tork bit to retract the caliper once the motor is removed. I prefer to fix things whenever possible and cant stand malfunction lights in the dash cluster. The module cost around 60$ on ebay. I have a spare wiring loom if you wanted to fix the wiring (easy) and plug in a new one. These are not component protection locked so they dont require dealer to code, only a scan tool.
@jameslink28673 жыл бұрын
I just bought an 04 Audi A8 and the a service parking brake light just came on yesterday. I do have an obd2 scanner, but have not scanned it yet. The parking brake works just fine as it engages and disengages on the pull of the handle. I have been hearing a lot of things about the vcds software and it sounds like almost nothing on the car can be done without it. So my question is, how would you go about getting this software?
@Veikra
3 жыл бұрын
You wont be able to do anything with a obd2 scanner. Your parking brake issue could be only on one side not working . They clamp so well that one is enough to hold the car. Vcds or vagcom is sold by a company called Rosstech
@angelrazo38533 жыл бұрын
I got a 2007 Audi a8 same light is on. Parking brake works. I can set it on and off. So your think I just need to reset it. Dont have vcds yet
@Veikra
3 жыл бұрын
try putting it on and off 3 times in a row. Otherwise you need vcds or other high end scanner. It could have one side stuck not moving. Have you tried with wheels off the ground? Car will stay put even with only one working. Very strong gearing. But just get a genuine vcds license. You can stay save and only use it to see codes so that other people can help you faster
@cihanergul11154 ай бұрын
Hey man same problem here. Brake works just fine when I pull it and push it but somehow it beeps all the time as if it is still on while none of the brakes are active. Driving became hell and I am not able to go to a mechanic . I am thinking of cutting off the EPB fuses just so this annoyimg sound goes away. I dont need handbrakes either. What would you say?
@Veikra
4 ай бұрын
It`s a parking brake motor that froze. There is a bearing in there that can rust if the parking brake isnt used often. An D3 a8 will beep over 10 km/h for 1 minute straight. Then it if you go below 10, it will reset and it will beep another minute once you resume driving over 10km/h. If the motor is frozen, it will log a fault. Supply voltge for EPB motor either left or right I've opened and fixed those motors with 100% success rate but I have access to a lot of tools. It`s always the frozen bearing for lack of use, or the connector that got corroded. I would rather fix it that delete it. You will have more problems than you think deleting it. on the a8, the car mesures brake pad thickness with this motor. So you will have 2 permanents malfunction light flashing in your dash, with the beeps on startups, plus a brake pad worn message. Get a used caliper, remove the motor and replace yours, then cycle the parking brake 3 times. Done deal and you`ll only MAYBE need to set pad thickness
@HermieHettmann144 жыл бұрын
Hi man! I have the same problem I believe. Haven't got round to looking at it but I was wondering if I could replace it without vcds software? Thanks in advance
@Veikra
4 жыл бұрын
Yes and no, you can but better not as you'll be left with old codes and wont be able to set the pad thickness. If youre stuck and need to put new pads you can remove the electric motor and use a tork bit to retract the caliper. BUt thats about it. It wont solve the warning light
@nelzurc61613 жыл бұрын
I’ve had this issue and it the cause was a seized caliper
@Veikra
3 жыл бұрын
yes I've seen that too. It will say voltage supply as well.
@Nightrunnergunner2 жыл бұрын
Daily drive my 2013 audi a8l every 3 weeks or so i get the parking brake light along with abs light and esp, air suspension fault hill start assist fault and very rarely the epc light will come on.... yet parking brake works fine, so do the brakes. light always goes away by itself in a day or 3 at most im thinking brake light switch or some other sensor/wire issue because car runs fine. replaced all rotors pads and sensors fluid flush and fill what could be the issue? any information is appreciated
@Veikra
2 жыл бұрын
Dont be afraid with all the different system at fault. Most likely, all those system depend either on the same sensor or depend on each other. A scan of all those affected modules would yield dependancy codes. By the affected modules you are telling me Id start with the level control. A bad level sensor can do all that. When those fail, they start by being intermittent. Still, you are not fixing it without software. You cant throw parts at a8, they still wont work and you
@danieltoussaint289 Жыл бұрын
I have the same problem on my 2010 a4 ,if you leave in New York ,how can you fix it for me and how much?
@Veikra
Жыл бұрын
Im on the other side of the border unfortunaly. Id still be willing to fix it if you want to come and check out Montreal
@vwaudiwelder2 жыл бұрын
Can someone please tell me which wires should be power or ground to retrofit these calipers to another car? Which of the smaller wires are signal/trigger wires to activate the electromagnetic solenoid and clamp the rotor? Thank you
@Veikra
2 жыл бұрын
there is no electromagnetic solenoid. Dont know where you got that idea from. It's just an electric motor and hall sensor for pulses. Big wires are the motor, small wires the sensor
@vwaudiwelder
2 жыл бұрын
@@Veikra Yes you are correct. Must one or both of the small wires be connected to power or ground to initiate rotation in either direction of the motor?
@mariusgheorghe52233 жыл бұрын
Hello man i just got the warning for parking brake malfunction , i was got 2 disck 2 pads and 2 abs sensors , had change them , using a delphy scaner , it was all good i have earsed the warnings and faults , and the next day in the morning i jumped into the car and got the warning again what can be or what advice me to check , please im in really need of help , no mOney to bring the car at the mecanics it wont let me start the engine , some one told me to check the brake fluid and is all good :((((
@Veikra
3 жыл бұрын
Starting engine is unrelated, so I would check battery cables. Maybe the power goes too low. Did you try to start it several times? When battery goes too low the first turn of the key wont work, you have to remove key and redo it. Check battery voltage first. The car wont even try to start below 10V or so. Let me know.
@mariusgheorghe5223
3 жыл бұрын
@@Veikra the last time the battery was 12 v and after when i was with the scanner into the car started to drop as i was more than 2 hours , so i just placed the battery on charge and il check the voltage again before i try , an il be back with news , cant remove the errors as is telling me is no comunicating with ecu
@Veikra
3 жыл бұрын
@@mariusgheorghe5223 no power to ecu then. Check right side dash fuse box.
@KT-cd4om2 жыл бұрын
Its just a car. Its just a bunch of wires. LOL😆🤣😂😹😆
@Veikra
2 жыл бұрын
it is. No sense in getting overwelmed. Pick a wire, fix it, move to the next wire !
@armandorodriguez83193 жыл бұрын
Hi bud i have problem with my parking brake is stuck in parking after replace brake pads is suppose put charging in battery before start but by mistake I did not put it and now i have this problem appreciate whatever help you can bring me regards
@Veikra
3 жыл бұрын
I'll help you. My understanding is you retracted the caliper using VCDS then once done, closed them using VCDS ? But all without battery right?
@armandorodriguez8319
3 жыл бұрын
@@Veikra yes i use obdeleven but no use the battery charger
@armandorodriguez8319
3 жыл бұрын
and now the parking brake is stuck and he won't let me make any movement with the obdeleven
@Veikra
3 жыл бұрын
@@armandorodriguez8319 Im not familiar with obeleven but I know for fact you can damage the module from undervoltage. Can you talk to the module at least? usually when they go bad you can talk to them but theyll say wiring is open circuit on a wheel or both
@156nunez2 жыл бұрын
Where'd I get the vcs program from
@Veikra
2 жыл бұрын
vcds or vagcom can be bought from rosstech's website. I am not affiliated with them.
@mb106429
2 жыл бұрын
There are about 4 suppliers in the UK, I recently used one called gendan and they are there and post stuff quickly There are rip off cheap vagcoms and copies of the genuine one... but they are crap, mess about, don't recognise the usb lead so you have to piss about with it everytime you boot it up, not all the functions work Real paid vcds works. You pay for 3 car version, upgrade to 7 for another 80 quid, uograde further to unlimited cars for another few quid. I got the 3 because I only have 2 Audis and am covered if a friend is in trouble or I replace one of my motors. Diagnose before you get the spanners out
@satyashah30453 жыл бұрын
Hello, I am from India. 6 months ago I purchased AUDI Q5(2013 model) i.e. second hand.From 2-3 months back I am facing problem in starting my AUDI. It shows message like stability fault program, parking brake error and gear box malfunction. I showed this problem many technicians but no one can fix it. It takes 15 mins to start the car. Could you please suggest some solution to this?
@satyashah3045
3 жыл бұрын
Because now we are so tired of this that we are thinking to return it. Initially in the starting 2-3 months we didn't face such problem. From last two months we are facing.
@Veikra
3 жыл бұрын
@@satyashah3045 without scanning it there's no telling what the root cause is. Whatever mecanic you took it to isnt qualified. Otherwise you'D have malfunction code to go from and find the problem. Find another mecanic to do a full electronic scan of the whole vehicule and ill help you then once we have the codes. Otherwise, it's impossible to do anything
@satyashah3045
3 жыл бұрын
@@Veikra now problem is solved atlast after changing key barrel
@Veikra
3 жыл бұрын
@@satyashah3045 Good to know. They had a similar problem in Q7 steering column. I used to change the 3 switches inside the module. A pain to get to!
@satyashah3045
3 жыл бұрын
@@Veikra Thanks for responding!!
@jax70383 жыл бұрын
Hi how mucb does this cost for an audi a4 08?
@Veikra
3 жыл бұрын
can't tell without diagnostic what part on all this is bad
@maulajatt56552 жыл бұрын
Hey, I wonder if you can help. I have purchased a A8. It was parked for 7 months. It looks like my rear brakes pads are either finished or are binding on the discs. I have the parkbrake light flashing on the dash and when I apply the handbrake, I can hear the sound of a motor on the rear passenger wheel that lasts for 2-5 seconds. Any thoughts or suggestions
@Veikra
2 жыл бұрын
probably your rear passager caliper is not working and not releasing. I assume you have vcds software?
@maulajatt5655
2 жыл бұрын
@@Veikra I do not know what vcds software is. Shall I change the brake calipers? Will that solve the problem
@Veikra
2 жыл бұрын
@@maulajatt5655 No, you CANNOT throw part at an a8, it will ruin you! YOu need a capable scan tool to see and and diagnose the problem. Even if you replaced the caliper youd still have the light. THe brake pads thicken needs to be programmed in and a basic setting initiates. You need the tool to replace the brake pads anyways. Otherwise, you need to find a good honest mechanic with the scan tool and that just wont replace parts without proving them bad first. These cars are amazing if you have such a mechanic and they are terrible if you have an old school mechanic that simply swap parts hoping it will work. For instance, reading the code on mine pointed me to a bad wiring connection. I would have replaced both calipers, pads, disk and STILL would have had the malfunction light. That's how people get robed at the mechanic because he's not knowledge enough to work on these
@maulajatt5655
2 жыл бұрын
@@Veikra I completely understand what you mean but my car has has parked for 7 months and the brakes must be binding on the discs. I don't know as I have also no wheel locking nut. Do you know any good mechanics for these cars in the North West area
@Veikra
2 жыл бұрын
@@maulajatt5655 it's got a malfunction light so either it's not only binding or the battery went flat over the 7 month it didnt run. I sadly can't suggest any mechanic in that area. Those car's limitations are always access to a good honest mechanic. I advise heading over to audiworld forum to look for one. That's a good place to look for knowledgeable mechanics passionate about those cars.
@brandonallison80122 жыл бұрын
We’re are you located I need you bad bro
@Veikra
2 жыл бұрын
Im in the greater Montreal area, you?
@darellleverson41813 жыл бұрын
How can I contact you to get you to fix my vehicle
@Veikra
3 жыл бұрын
Where are you located ? Would be moot point if we arent close unless you are willing to drive/ship the car to me.
@kominfromthekorner8202
3 жыл бұрын
I need you too are you in the usa
@darellleverson4181
3 жыл бұрын
I’m in Chicago
@brandonallison80122 жыл бұрын
I’m having this same problem
@Veikra
2 жыл бұрын
Now you know what it takes to fix it
@brandonallison80122 жыл бұрын
I’ll pay you where are you located?
@Veikra
Жыл бұрын
Montreal or thereabout
@user-ou5iy6gy9v4 жыл бұрын
Hello Please Help me. I am Japanease. Sorry. I can speak english a little. OK. I have a questions. I have a audi A6 This car have epb probrem. I underrated you car epb problem. Please tell me Is this wire problem caused by epb motor's wire? Thanks! and sorry. Do you understand my english?
@Veikra
4 жыл бұрын
the problem can be caused by the wiring harness or the motor. It can also be the epb computer.
@mauricegray91988 ай бұрын
No help. No details.
@Veikra
7 ай бұрын
You missed the part where I checked the current to find out the car had a broken wire in the loom
Пікірлер: 67
Nice work. After the dealer couldn't fix mine..04 A8, the controller under the battery shorted and started a fire. The unit was made in Malaysia. A pile of plastic and charred wires. The service guy said it only controls the brake, so i just cut it off. No more parking brake! Btw, you can easily remove the electric motors on the caliper and unscrew the parking brake so you can replace the pads. They always put extra parts on cars...
@Veikra
Жыл бұрын
Dealer couldnt fix a leaky faucet. You need a independant guy. You can use a tork bit to retract the caliper once the motor is removed. I prefer to fix things whenever possible and cant stand malfunction lights in the dash cluster. The module cost around 60$ on ebay. I have a spare wiring loom if you wanted to fix the wiring (easy) and plug in a new one. These are not component protection locked so they dont require dealer to code, only a scan tool.
I just bought an 04 Audi A8 and the a service parking brake light just came on yesterday. I do have an obd2 scanner, but have not scanned it yet. The parking brake works just fine as it engages and disengages on the pull of the handle. I have been hearing a lot of things about the vcds software and it sounds like almost nothing on the car can be done without it. So my question is, how would you go about getting this software?
@Veikra
3 жыл бұрын
You wont be able to do anything with a obd2 scanner. Your parking brake issue could be only on one side not working . They clamp so well that one is enough to hold the car. Vcds or vagcom is sold by a company called Rosstech
I got a 2007 Audi a8 same light is on. Parking brake works. I can set it on and off. So your think I just need to reset it. Dont have vcds yet
@Veikra
3 жыл бұрын
try putting it on and off 3 times in a row. Otherwise you need vcds or other high end scanner. It could have one side stuck not moving. Have you tried with wheels off the ground? Car will stay put even with only one working. Very strong gearing. But just get a genuine vcds license. You can stay save and only use it to see codes so that other people can help you faster
Hey man same problem here. Brake works just fine when I pull it and push it but somehow it beeps all the time as if it is still on while none of the brakes are active. Driving became hell and I am not able to go to a mechanic . I am thinking of cutting off the EPB fuses just so this annoyimg sound goes away. I dont need handbrakes either. What would you say?
@Veikra
4 ай бұрын
It`s a parking brake motor that froze. There is a bearing in there that can rust if the parking brake isnt used often. An D3 a8 will beep over 10 km/h for 1 minute straight. Then it if you go below 10, it will reset and it will beep another minute once you resume driving over 10km/h. If the motor is frozen, it will log a fault. Supply voltge for EPB motor either left or right I've opened and fixed those motors with 100% success rate but I have access to a lot of tools. It`s always the frozen bearing for lack of use, or the connector that got corroded. I would rather fix it that delete it. You will have more problems than you think deleting it. on the a8, the car mesures brake pad thickness with this motor. So you will have 2 permanents malfunction light flashing in your dash, with the beeps on startups, plus a brake pad worn message. Get a used caliper, remove the motor and replace yours, then cycle the parking brake 3 times. Done deal and you`ll only MAYBE need to set pad thickness
Hi man! I have the same problem I believe. Haven't got round to looking at it but I was wondering if I could replace it without vcds software? Thanks in advance
@Veikra
4 жыл бұрын
Yes and no, you can but better not as you'll be left with old codes and wont be able to set the pad thickness. If youre stuck and need to put new pads you can remove the electric motor and use a tork bit to retract the caliper. BUt thats about it. It wont solve the warning light
I’ve had this issue and it the cause was a seized caliper
@Veikra
3 жыл бұрын
yes I've seen that too. It will say voltage supply as well.
Daily drive my 2013 audi a8l every 3 weeks or so i get the parking brake light along with abs light and esp, air suspension fault hill start assist fault and very rarely the epc light will come on.... yet parking brake works fine, so do the brakes. light always goes away by itself in a day or 3 at most im thinking brake light switch or some other sensor/wire issue because car runs fine. replaced all rotors pads and sensors fluid flush and fill what could be the issue? any information is appreciated
@Veikra
2 жыл бұрын
Dont be afraid with all the different system at fault. Most likely, all those system depend either on the same sensor or depend on each other. A scan of all those affected modules would yield dependancy codes. By the affected modules you are telling me Id start with the level control. A bad level sensor can do all that. When those fail, they start by being intermittent. Still, you are not fixing it without software. You cant throw parts at a8, they still wont work and you
I have the same problem on my 2010 a4 ,if you leave in New York ,how can you fix it for me and how much?
@Veikra
Жыл бұрын
Im on the other side of the border unfortunaly. Id still be willing to fix it if you want to come and check out Montreal
Can someone please tell me which wires should be power or ground to retrofit these calipers to another car? Which of the smaller wires are signal/trigger wires to activate the electromagnetic solenoid and clamp the rotor? Thank you
@Veikra
2 жыл бұрын
there is no electromagnetic solenoid. Dont know where you got that idea from. It's just an electric motor and hall sensor for pulses. Big wires are the motor, small wires the sensor
@vwaudiwelder
2 жыл бұрын
@@Veikra Yes you are correct. Must one or both of the small wires be connected to power or ground to initiate rotation in either direction of the motor?
Hello man i just got the warning for parking brake malfunction , i was got 2 disck 2 pads and 2 abs sensors , had change them , using a delphy scaner , it was all good i have earsed the warnings and faults , and the next day in the morning i jumped into the car and got the warning again what can be or what advice me to check , please im in really need of help , no mOney to bring the car at the mecanics it wont let me start the engine , some one told me to check the brake fluid and is all good :((((
@Veikra
3 жыл бұрын
Starting engine is unrelated, so I would check battery cables. Maybe the power goes too low. Did you try to start it several times? When battery goes too low the first turn of the key wont work, you have to remove key and redo it. Check battery voltage first. The car wont even try to start below 10V or so. Let me know.
@mariusgheorghe5223
3 жыл бұрын
@@Veikra the last time the battery was 12 v and after when i was with the scanner into the car started to drop as i was more than 2 hours , so i just placed the battery on charge and il check the voltage again before i try , an il be back with news , cant remove the errors as is telling me is no comunicating with ecu
@Veikra
3 жыл бұрын
@@mariusgheorghe5223 no power to ecu then. Check right side dash fuse box.
Its just a car. Its just a bunch of wires. LOL😆🤣😂😹😆
@Veikra
2 жыл бұрын
it is. No sense in getting overwelmed. Pick a wire, fix it, move to the next wire !
Hi bud i have problem with my parking brake is stuck in parking after replace brake pads is suppose put charging in battery before start but by mistake I did not put it and now i have this problem appreciate whatever help you can bring me regards
@Veikra
3 жыл бұрын
I'll help you. My understanding is you retracted the caliper using VCDS then once done, closed them using VCDS ? But all without battery right?
@armandorodriguez8319
3 жыл бұрын
@@Veikra yes i use obdeleven but no use the battery charger
@armandorodriguez8319
3 жыл бұрын
and now the parking brake is stuck and he won't let me make any movement with the obdeleven
@Veikra
3 жыл бұрын
@@armandorodriguez8319 Im not familiar with obeleven but I know for fact you can damage the module from undervoltage. Can you talk to the module at least? usually when they go bad you can talk to them but theyll say wiring is open circuit on a wheel or both
Where'd I get the vcs program from
@Veikra
2 жыл бұрын
vcds or vagcom can be bought from rosstech's website. I am not affiliated with them.
@mb106429
2 жыл бұрын
There are about 4 suppliers in the UK, I recently used one called gendan and they are there and post stuff quickly There are rip off cheap vagcoms and copies of the genuine one... but they are crap, mess about, don't recognise the usb lead so you have to piss about with it everytime you boot it up, not all the functions work Real paid vcds works. You pay for 3 car version, upgrade to 7 for another 80 quid, uograde further to unlimited cars for another few quid. I got the 3 because I only have 2 Audis and am covered if a friend is in trouble or I replace one of my motors. Diagnose before you get the spanners out
Hello, I am from India. 6 months ago I purchased AUDI Q5(2013 model) i.e. second hand.From 2-3 months back I am facing problem in starting my AUDI. It shows message like stability fault program, parking brake error and gear box malfunction. I showed this problem many technicians but no one can fix it. It takes 15 mins to start the car. Could you please suggest some solution to this?
@satyashah3045
3 жыл бұрын
Because now we are so tired of this that we are thinking to return it. Initially in the starting 2-3 months we didn't face such problem. From last two months we are facing.
@Veikra
3 жыл бұрын
@@satyashah3045 without scanning it there's no telling what the root cause is. Whatever mecanic you took it to isnt qualified. Otherwise you'D have malfunction code to go from and find the problem. Find another mecanic to do a full electronic scan of the whole vehicule and ill help you then once we have the codes. Otherwise, it's impossible to do anything
@satyashah3045
3 жыл бұрын
@@Veikra now problem is solved atlast after changing key barrel
@Veikra
3 жыл бұрын
@@satyashah3045 Good to know. They had a similar problem in Q7 steering column. I used to change the 3 switches inside the module. A pain to get to!
@satyashah3045
3 жыл бұрын
@@Veikra Thanks for responding!!
Hi how mucb does this cost for an audi a4 08?
@Veikra
3 жыл бұрын
can't tell without diagnostic what part on all this is bad
Hey, I wonder if you can help. I have purchased a A8. It was parked for 7 months. It looks like my rear brakes pads are either finished or are binding on the discs. I have the parkbrake light flashing on the dash and when I apply the handbrake, I can hear the sound of a motor on the rear passenger wheel that lasts for 2-5 seconds. Any thoughts or suggestions
@Veikra
2 жыл бұрын
probably your rear passager caliper is not working and not releasing. I assume you have vcds software?
@maulajatt5655
2 жыл бұрын
@@Veikra I do not know what vcds software is. Shall I change the brake calipers? Will that solve the problem
@Veikra
2 жыл бұрын
@@maulajatt5655 No, you CANNOT throw part at an a8, it will ruin you! YOu need a capable scan tool to see and and diagnose the problem. Even if you replaced the caliper youd still have the light. THe brake pads thicken needs to be programmed in and a basic setting initiates. You need the tool to replace the brake pads anyways. Otherwise, you need to find a good honest mechanic with the scan tool and that just wont replace parts without proving them bad first. These cars are amazing if you have such a mechanic and they are terrible if you have an old school mechanic that simply swap parts hoping it will work. For instance, reading the code on mine pointed me to a bad wiring connection. I would have replaced both calipers, pads, disk and STILL would have had the malfunction light. That's how people get robed at the mechanic because he's not knowledge enough to work on these
@maulajatt5655
2 жыл бұрын
@@Veikra I completely understand what you mean but my car has has parked for 7 months and the brakes must be binding on the discs. I don't know as I have also no wheel locking nut. Do you know any good mechanics for these cars in the North West area
@Veikra
2 жыл бұрын
@@maulajatt5655 it's got a malfunction light so either it's not only binding or the battery went flat over the 7 month it didnt run. I sadly can't suggest any mechanic in that area. Those car's limitations are always access to a good honest mechanic. I advise heading over to audiworld forum to look for one. That's a good place to look for knowledgeable mechanics passionate about those cars.
We’re are you located I need you bad bro
@Veikra
2 жыл бұрын
Im in the greater Montreal area, you?
How can I contact you to get you to fix my vehicle
@Veikra
3 жыл бұрын
Where are you located ? Would be moot point if we arent close unless you are willing to drive/ship the car to me.
@kominfromthekorner8202
3 жыл бұрын
I need you too are you in the usa
@darellleverson4181
3 жыл бұрын
I’m in Chicago
I’m having this same problem
@Veikra
2 жыл бұрын
Now you know what it takes to fix it
I’ll pay you where are you located?
@Veikra
Жыл бұрын
Montreal or thereabout
Hello Please Help me. I am Japanease. Sorry. I can speak english a little. OK. I have a questions. I have a audi A6 This car have epb probrem. I underrated you car epb problem. Please tell me Is this wire problem caused by epb motor's wire? Thanks! and sorry. Do you understand my english?
@Veikra
4 жыл бұрын
the problem can be caused by the wiring harness or the motor. It can also be the epb computer.
No help. No details.
@Veikra
7 ай бұрын
You missed the part where I checked the current to find out the car had a broken wire in the loom