Great video with great pictures and explanations. Thank you and you should be very proud of making such a good video. Thank you again.

@TightWadDIY

6 күн бұрын

I’m glad you found the video and that it was helpful.

This is so awesome! Thank you for putting this together! This is the only clear video online for this whole process. Very well done!

@TightWadDIY

Жыл бұрын

You’re welcome. That’s is why I made the video! I looked everywhere for a great tutorial and couldn’t find one. I ended up with over 2 hours of footage I had to break down. I hope yours goes well.

Thanks a ton for this video! Just did mine using this as a guide and it was extremely helpful 👍🏼

@TightWadDIY

6 күн бұрын

Yes! I’m glad it helped someone. I couldn’t find a thorough video so that’s why I made one.

I wasn't going to rebuild mine but after watching your step by step video I feel confident doing it thanks...Great video!

@TightWadDIY

Жыл бұрын

That’s great! You can do it!

Best video… well explained… you made it look easy…plucking the courage to fix my cart… thanks

@TightWadDIY

Жыл бұрын

I couldn’t find a complete video so I did it myself!

This was great help. I had issues with axel bolts under motor. I ended up removing the motor to access the bolts. I was able to remove brake plate bolts without messing them up. Reconnecting the brake cable was the hardest thing I had to deal with. Cart brakes are much stronger and no noise.

@TightWadDIY

Жыл бұрын

That’s great! I’m glad it worked for you too!

Good clear vid! Thanks

@TightWadDIY

Жыл бұрын

You’re welcome! I really hope it helps others trying to do the same.

Fantastic video!

@TightWadDIY

Жыл бұрын

Thanks!

Really appreciate this video. I was able to complete this process exactly like you did. However, although I do not hear the noise braking forward.. I do still hear the noise (minimal) when I brake going in reverse... any thoughts?

Huge help!

@TightWadDIY

Жыл бұрын

Great! It took a long time to record and edit the video so I’m happy to know it’s helping people.

I had two g29s I bought around same time. Second one was a good deal and couldn't pass it up. One had team axle and other was newer when the switched back to standard axle with drum brakes. Team axle definitely has better braking power with much less force being applied to pedal but I'm kinda glad I sold that one and kept newer drum brake model even if brakes aren't as good. Much simpler maintenance. I have such steep inclines here I really need front brakes as my rears.overheated a while back while going downhill with too heavy of a trailer. It could have ended badly as I was forced to exit driveway into main road at high rate of speed. Live and learn.

@TightWadDIY

Жыл бұрын

Yikes! That could have been really bad.

@truthhurts2149

Жыл бұрын

@@TightWadDIY luckily its a rural county road but still...

@TightWadDIY

Жыл бұрын

@@truthhurts2149 I figured it was when you said you were pulling a trailer with a golf cart! The city folks wouldn’t know how to hook it up.

Good instructions thank you. Just refurbished my motor (brushes etc) and the brake may be next, after this video I know I can do it myself ! just one question, how much oil does it take please ? cheers Ian

@TightWadDIY

Жыл бұрын

Yes! I’m glad you feel empowered to get it done! Just fill it up. I think it was about 3/4 of a quart.

Thank you so much for this great step by step video! Help me out a lot! I am almost done. Just one question, that last plate if I don’t have a press would it make a difference if I don’t change it?

@TightWadDIY

8 күн бұрын

I didn’t change mine and it worked fine.

Great video. Thank you for doing it. One question? I have replaced the transaxle oil on my 2013 YRDA G29 cart as a maintaince service. (at 5 yrs) There was no noise or squeeks when applying the brakes before I changed the oil. Now with the new Yamalube oil, I get a slight chirp or squeek just before the cart comes to a stop at times. Your opinion? Should I not worry about it? or try changing the oil again? Thank's in advance. Jim......

@TightWadDIY

Жыл бұрын

Are you sure you added enough YamaLube? I had a hard time getting the correct amount in while it was on the cart.

I have to do the same repair. Do you still recommend the pad and plate kit?

This helped me out alot. Thanks. Mine was making the same noise and I took apart and changed all disc's and plates and it's making the same noise. I'm stumped. All gears and bearings look good too. Not sure what to do now

@TightWadDIY

Жыл бұрын

It makes the same noise as mine when you are coming to a stop? Did you use the YamaLube? Are you sure you added the right anoint?

@khuber32

Жыл бұрын

@@TightWadDIY yes the same noise. This video did help me out to get it back together and I did use yamalube. I can only fit just over a quart in rear end. Used all new brake plates and discs

@khuber32

Жыл бұрын

@@TightWadDIY do you have any idea what else it could be?

@TightWadDIY

Жыл бұрын

@@khuber32 I really don’t know. I’m new to golf carts. I was shocked at how big of a job it was to replace the brakes!

This is awesome! What’s the purpose of blowing out the carbon in the motor? Is that a recommended maintenance item?

@TightWadDIY

Жыл бұрын

I figured it wasn’t good to have all of that powder in there. Wanted to ensure the best environment possible. I don’t know that it’s recommended by Yamaha but a lot of other users mentioned doing it.

I was going to take my 2013 G-29 Yamaha to shop but they can’t guarantee they can fix it or get parts so after this video I will try! My rearend grinds and cart doesn’t move. Do you have a video showing what the end of axle locks into inside the housing?

@TightWadDIY

11 ай бұрын

I do. Check out the other videos in this playlist.

Hi! I appreciate the video! I am replacing my brakes as well. I noticed when putting the friction disc and plates back in you used 5 discs and 4 plates? It is kind of sped up there so I’m not for sure. But my kit came with 5 plates. And you ended with friction disc and I keep ending with that last plate. What am I doing wrong? Thanks!

@TightWadDIY

Жыл бұрын

Sorry I just now saw this comment. I put mine back exactly how it came off. Looks like I used 5 friction plates(with grooves) and 4 smooth ones. So start and end with a grooved.

How do you find the link to buy from golf cart garage?

So will you explain how you fit your impact driver down to a quarter inch drive? I bought the 3/8th impact driver in the link, but have no way to put my quarter inch drive 3/16 hex key into it…

@TightWadDIY

Жыл бұрын

I used a reducer that I bought at Lowe’s.

I have a 2007 YDRE. It's not making noise while breaking, but it's making a grinding noise while coasting or once I reach top speed and it goes into regen mode. Thoughts?

@TightWadDIY

Жыл бұрын

Check the ball bearings on the axle.

How do you attact those sockets to the craftmans impact screwdriver? Am i missing something? Thanks

@TightWadDIY

Жыл бұрын

The end pulls off of the impact. Took me a min to figure it out too.

Hi, is there a way to change the input shaft without cracking open the cover? The last bearing on the input shaft is hitting a gear, and I can't get it out. I really dont want to crack open the Case.

@TightWadDIY

Жыл бұрын

You shouldn’t need to. My left side shaft came out because the bearing blew out. See if this video helps: kzread.info/dash/bejne/fqOns8h9ZJTbidI.html

Hi sir I cannot see the monitor screen

@TightWadDIY

Жыл бұрын

I’m not sure what you mean. The video is playing fine for me.

Instead of an "impact screwdriver"...couldnt you just use an "impact drll?

@TightWadDIY

Жыл бұрын

No. It wasn’t powerful enough.