You did the right thing by fixing the problem. Mechanical problems don’t fix themselves they just get worse. The next owner won’t have to worry about this problem for a while!

@HomeGaragechannel

4 ай бұрын

thank you I appreciate that a lot

@Idkx2ummm

4 ай бұрын

@@HomeGaragechannel you’re welcome 😊

I just recently learned how to adjust valves and did alright didn't know the engine heated up that much good to know !

@HomeGaragechannel

4 ай бұрын

thank you !

These are so easy to sell. Great job on solving the issue.

@HomeGaragechannel

4 ай бұрын

Yes they are, hope to have it sold soon

Love it when the work is simple. Good job. 💯

@HomeGaragechannel

4 ай бұрын

thank you I appreciate it

Good video. So many people throw mowers out because of a simple out of adjustment valve. Hey, more money for us.

@HomeGaragechannel

4 ай бұрын

you got that right

This was great knowledge for me. Just incase I ever run into something similar.

@HomeGaragechannel

4 ай бұрын

Glad it was helpful!

Good clear explanation! The mower was worth saving! Thanks Ken

@HomeGaragechannel

3 ай бұрын

You bet and thank you!

You did just as I would have done. Nice work, as usual!!! Thanks for sharing!!!

@HomeGaragechannel

4 ай бұрын

Thanks again!

Prevented maintanence is the way to go. You did the right thing for sure. Cheers.

@HomeGaragechannel

4 ай бұрын

thank you for seeing it that way

I recently started using NGK plugs in all my small engines except my generator. Changed the plug in it last year

@HomeGaragechannel

4 ай бұрын

NGK makes a great spark plug!

@posadist681

2 ай бұрын

Thanks I will try those plugs. Also I love your channel

You done what should of been done. Good work!

@HomeGaragechannel

4 ай бұрын

Thank you William Snow

I bought my mom a push mower with the same engine. It's a great mower but I am not a fan of the air filter. It's a redesign that causes it clogs easily in my opinion. If you overfill the fuel, it will run down onto the filter housing and get on the filter resulting in a hard start until you let the filter dry out. Great mower, I would just rather have the foam filter.

@HomeGaragechannel

4 ай бұрын

it's not the best but for the price range it's in, it's makes sense

Thanks!

@HomeGaragechannel

4 ай бұрын

thank you so much for the Super Thanks! I appreciate it a lot!

THANK YOU FOR THE VIDEO

@HomeGaragechannel

4 ай бұрын

anytime

Nice fix!!!!!!!!!

@HomeGaragechannel

4 ай бұрын

Thank you

You did the right thing.

@HomeGaragechannel

4 ай бұрын

thank you

🇺🇸👍 You should always do the very best you can do it reflects on yourself 👍

@HomeGaragechannel

4 ай бұрын

agreed!

Good to know

@HomeGaragechannel

4 ай бұрын

thank you

Got a similar mower out back. It'd a bolens needing w cable a blade sharpen probably a carb clean and oil change

@HomeGaragechannel

4 ай бұрын

I hope you can get it going

Nice job. I would have done the same thing.

@HomeGaragechannel

2 ай бұрын

Right on

I think you did a great job, explaining the issue and the possible causes. I don't think it was petty to adjust the valves and check things.

@HomeGaragechannel

4 ай бұрын

I see your point

5 mowers brought in this week alone, 3 of them with the older flat head briggs engines and stuck closed chokes.

@HomeGaragechannel

4 ай бұрын

Nice start to the season!

That looks new, or darn close to it.

@HomeGaragechannel

4 ай бұрын

it does doesn't it!

@snoopysrc

4 ай бұрын

​@HomeGaragechannel is looks like a 2019 model mtd mower

A fix is a fix but I thought it was going to be something worse like the thermostat coming loose from the choke or something like that and it loading up. Sounded like it was running better after you set the valve anyway. Happy weekend!

@HomeGaragechannel

4 ай бұрын

Thank you , and yes, i was hoping it was be something a bit easier to do as well.

Even small problems can become serious eventually I want my machines to run at their best even small problems would irritate me too so your not alone in that situation including when you are selling it you don’t want to sell a machine and then it gives the person problems then you would get a bad review if it runs at its best then the owner who buys it will give you a good review and then they will recommend you then more people will buy you projects it’s always good to make sure it’s at its best

@HomeGaragechannel

4 ай бұрын

Very well said, thanks for seeing it that way.

with these cheap mower decks with this wheel adjustment method, its always a good idea to add large metal washers on the inside and outside of the deck this prevents that flimsiness and bowing out of the wheels.

@HomeGaragechannel

4 ай бұрын

thank you for the tip

I picked the same model on the app free and posted for 100 usually in the weekend it sells

@HomeGaragechannel

4 ай бұрын

Hey nice work!

Got that going on with another mower but has other issues but i didnt set the valve at .005 but have to go back over it again since it is doing basically the same thing

@HomeGaragechannel

3 ай бұрын

that's a good idea.

Hello!😊Have a nice weekend! How is it going? Great channel and nice videos.👍299👈

@HomeGaragechannel

4 ай бұрын

Thanks and welcome, going good so far here.

Glad the valve cover dent could be fixed. That explained the valve being out-of-specification, eh? :-) I wonder how it got dented in the first place? :-)

@HomeGaragechannel

4 ай бұрын

unfortunately the clearance work themselves out of tolerance

Might have went for the coil as part of troubleshoot.

@HomeGaragechannel

4 ай бұрын

you are correct, bad coils can certainly act this way

yesterday I was cutting grass and I was mowing near the fence and I saw three lawnmowers. I didn’t know which kind of brand they were so I asked them about it and they said that only one of them works so I opened their back gate and I saw four lawnmowers. One of them was a Honda hex 217. In the other room was pretty rare to find, and it was a Murray craftsman, but inside the pool rope being on the side, it was in the middle, and then the other lawnmower was a Troy built with a Briggs flathead and the other one was a yard machines with the newer Briggs engine do you have any advice on fixing them?

@HomeGaragechannel

4 ай бұрын

sure, go thru my videos, find a video that looks like the mower you're going to work on, and follow along.

@ChuckyandHelenshow

4 ай бұрын

@@HomeGaragechannel Will do. Thanks for the advice.

do you think is the gap on the rocker arm was to lose what will happen?

@HomeGaragechannel

4 ай бұрын

not much will happen if the gap is a little "looser" than normal. However if the clearances get well over 0.020" things will go south pretty quickly. First the rope will be tough to pull and second it should put quite a load on the engine even at idle

It's no fun having the pull cord whacked out of your hand. You did the right thing by adjusting the valve lash.

@HomeGaragechannel

4 ай бұрын

thank you, I appreciate it.

When you're dipping the engine for oil, I'm pretty sure all briggs and stratton engines say to not screw in the dip stick to get the level, just dip it and pull it out. Some bigger engines have that written on the stick.

@sleve_mcdichael_

4 ай бұрын

Briggs and Stratton lists on their site "To ensure an accurate reading, reinsert the dipstick completely. If the dipstick cap is a screw-in type, ensure an accurate reading by screwing in all the way before removing it to check the level." Some are like that though. Usually, I've noticed Hondas. But it is something to look out for sure.

@HomeGaragechannel

4 ай бұрын

I'm sure on Briggs it say to seat the dipstick all the way in.

@HomeGaragechannel

4 ай бұрын

thank you for the information

@georgenovotny4421

4 ай бұрын

This name egret, you are dead wrong! Lol

4:05 maybe that’s why my pressure washer rope gets yanked out of my hand I thought it was just because I was old😅

@HomeGaragechannel

4 ай бұрын

LOL!!!

I call theses grave mowers because there light and easy to load to take to cemetery

@HomeGaragechannel

3 ай бұрын

nice description

Test compression and adjust valves

@HomeGaragechannel

4 ай бұрын

great idea

What courses a pull cord to ding when a lawnmower is running... thanks

@HomeGaragechannel

Ай бұрын

most times, the handle moves a bit, causing the pull rope to move with it. The recoil is trying to partially work when this happens and the pawls are hitting the starter cup.

One of the reasons for this problem are damaged piston rings - once the mower warms up it loses compression when this is the cause. (Saying this before seeing the actual solution)

@HomeGaragechannel

4 ай бұрын

hey you're not wrong , thank you for brining that up

You dont need to check the gap on spark plug as long as its not touching the electrode or sticking out far enough to hit the piston it should be fine but you can if you want to just saying 😂😂😂😂😂😂😂😂😂😂

@HomeGaragechannel

4 ай бұрын

thank you for the tip

Thank you for this video! However, I have been unable to properly diagnose my similar problem after much effort - gets spark, gets fuel, good spark plug, good coil, etc. After researching all the KZread videos describing similar problems, I have found one commonality. Most are troubleshooting mowers with Briggs & Stratton motors. I hate the thought of dropping another wad of cash, but I hope to lower my future life cycle costs by staying away from these motors.

@HomeGaragechannel

3 ай бұрын

I agree, pick an engine brand you like and stick with it

Dirt cheap engines. I guess that's why a lot of budget machines still use Briggs. Although I find it funny that on some of its premium, top of the line or commercial machines Briggs companies use Honda like Snapper and Ferris, unless a Vanguard fits those machines which is unlikely for the size of the machines there like a Ferris 32" FW15 and the Snapper Ninja commercial 21" walk behinds. That's gotta say something about a company that claims 9/10 brands use B and S engines, even if a good number of those companies are actually owned by Briggs. I mean, Murray, Snapper, Ferris, Simpicity, Billy Goat....you get the idea.

@HomeGaragechannel

3 ай бұрын

thank you for sharing that information. I'm sure they have their reasons for choosing the engines they do

Hey man. I was wondering, I saw a video about one of your weed eater trimmers and I can’t remember the name of the video. All I can remember is that it had really high compression of 175 psi. Do you happen to recognize what video that was?

@HomeGaragechannel

4 ай бұрын

man you're asking the impossible, I've must have made over a hundred trimmer videos between both channels in the last 6 years. I couldn't tell you which one you're referring to.

@Ethan_the_Railfan

4 ай бұрын

@@HomeGaragechannel ok. Thank you though. And keep up your hard work!

@HomeGaragechannel

4 ай бұрын

thank you and I will.

Why was it sitting by the side of the road?

@HomeGaragechannel

4 ай бұрын

they were clearing space up by the looks of the stuff that was there with it.

Would of did the same😀

@HomeGaragechannel

4 ай бұрын

I knew you would!

Haven’t you fixed a couple of these on the channel before?

@HomeGaragechannel

4 ай бұрын

probably about a dozen and some on the other channel too. They made tens of thousands of these.

@user-dj7pm2bt3q

4 ай бұрын

I have seen a couple on Facebook market place in Abbotsford too

1

@HomeGaragechannel

4 ай бұрын

thanks

I would have gone through it like a fine tooth comb.

@HomeGaragechannel

4 ай бұрын

great choice!

Those 125cc have their problems. The 140cc or bigger is better

@HomeGaragechannel

4 ай бұрын

I agree

Absolutely not super job well done. About $150.00 worth

@HomeGaragechannel

4 ай бұрын

thank you!

No I don't think that you went too far because you didn't fire the parts cannon to fix the problem. It's like some people are wondering why I'm not marrying a woman whose a Green sort of them in my local area, last year I replaced the starter motor solenoid in my car because I had a slow cranking issue with my car when the engine was hot. I have a battery load tester which I tested the battery with & it passed with flying colours so when I did an oil change I gave the starter motor cable on the solenoid a wiggle & sure enough,it was loose. While tightening the nut on the solenoid fixed the problem it was only temporary so I thought,oh bugger it & I bought a new solenoid for the not very old starter motor,once I replaced it, that fixed the problem. Now a woman who I went to school with walked into my local post office which I do a bit of business with & blew up at the staff there asking "why didn't he replace the battery ?" So she's wondering why I'm not working for their people & I think that I have pissed her off when she's a woman who has used a lot of guys, had a lot of children to them, she's used all of those guys because she has collected child support payments off them & she has earned herself the reputation of being a prostitute in her local area which is about 20 kilometres or 13 miles or so away from my nearest local town. So she is after a man who will fire the parts cannon & she came into that town just because she's very angry with me, apparently I don't marry one of them whose 45 years old or even a 25 years old Low whose like that !

@HomeGaragechannel

4 ай бұрын

I like the way you put that

Lol, this is reason why Honda is best, B&S lawn movers falls apart after 5 years and looks like Chinese snails.

@HomeGaragechannel

4 ай бұрын

LOL!!

@libraeotequever3pointoh95

4 ай бұрын

I'm thinking that denting the valve cover isn't quite "normal use" or "normal wear & tear". Possibly an accident. Oh well. Given the cost of a repair at a small-engine repair shop versus the cost of a new mower with the same capabilities, the original owner probably did the math and chose the path of least resistance and greatest peace of mind (especially if they're not "mechanically inclined", eh?). That said, as this video demonstrated, a little mechanical know-how enabled someone to trash-pick and repair this mower for future use. Personally, I have a Walmart variation on the theme of 20" simple lawnmowers (the Hyper-Tough, with adjustable wheels) purchased new for $149.99 dollars a few years ago that is still going strong. The only upgrade I've done is to replace the OEM blade with a high-lift blade. Made a nice difference (improved air-flow under the mowing-deck and smoother engine operation). Annual oil changes, air-filter and spark-plug replacement and stabilized gasoline are part of my routine. I feel they're a decent value.