SUPPORT THE CHANNEL and help us make more content! Buy rubber tracks, heavy duty tooling, and undercarriage parts at tinyurl.com/Support-TekamoHD

he seems like a cool boss/teacher. The ones at my work just cuss me out for not reading his mind.

this dude is a super good boss hes literally teaching you everything including how to do the job to even how to act on the job. mad props

Hey I'm a mobile plant-fitter (mobile heavy duty mechanic) in the U.K, its so interesting seeing how you guys do it in Canada, I'm so jelly of your service trucks, over here most guys run 3.5 tonne vans nothing like what you guys get over there, so we are very limited on equipment for jobs due to the weight we can carry, if you go above 3.5t you have to by law install a tachograph so its more of a ball ache :( but love the video I could watch Cam and Carson for hours, was laughing so hard at that untimely toilet break lol really good content loving the banter and camaraderie, its very similar to the guys I work with :) 10/10

Just starting my 1st year heavy duty love watching the videos with Cam and Carson

@TekamoHD

2 жыл бұрын

How's the 1st year going? You like it?

@KamloopsFilms

2 жыл бұрын

@@TekamoHD having alot of fun at work

Been busy in the fields and have been catching back up on these videos and ive gotta say the editing and pure comedy gold is at a all time high 😂 you guys together make for some stellar content. Keep it up 👍

@TekamoHD

Жыл бұрын

Hey it's awesome to see you in the comments again. Hope you've been well. Thank you very much! We're glad you like the content.

ONE OF THE BEST UPLOADS ON THIS CHANNEL

Found the page recently, . I run equipment in San Diego, doing big grading. Always give my wrench guys major props, we'd be screwed without you guys. Love the vids, and for the people who think hes being a dick to the apprentice, clearly do NOT work in construction or heavy equipment because this dude is clearly a hell of a mentor to the guy. Keep up the long vids!

Awesome vid!! Cams the man love razzing the boys at work! gotta keep these apprentices on their toes and wanting more!

This awesome guys. The PM service work videos are great but these unexpected type repairs are the shit!

@TekamoHD

2 жыл бұрын

More to come man!

I’ve used compressed air on a cylinder I couldn’t pull apart. What I did tho, I tied up the cylinder. Then I put a regulator at the end of the air hose and started with 5 psi, and slowly increase the pressure to push the cylinder. Worked good for me

@BluTechEquipment

2 жыл бұрын

That's the right way to do it. I try keeping my explanations simple and hopefully good mechanics can figure out the safe way to do it by learning from what didn't work. In a shop or if the cylinder is held on a bench it's definitely quicker to use shop air with a regulator, just secure the rod so she doesn't turn into a cannon.

@KhusheKenworth

5 ай бұрын

Using compressor air to get the rod is sure way to get injured lol.

It's like watching the trailer park boy's and hear Ricky talking.

I like how you do work and you bring joy to work with your partner

Your videos are awesome. I'll love to be one of your apprentice to gain more in field works, when I'm done with my undergraduate studies.

Cam is like my favorite guy to watch on KZread now. I don’t know how more don’t watch this.

@TekamoHD

Жыл бұрын

Spread the word! If you're in some groups, share our videos. We appreciate you watching and the kind words, Jon.

love how you set your tools down stream from the oil waterfall and then ask why they so slimed

Good job guys

@TekamoHD

2 жыл бұрын

Thanks! Glad you liked it. Part 2 very soon.

Love your adjustable breaker bar setup there bud

Back to back dose of the Camster!! Nice job Wrenchy!

@chadrides914

2 жыл бұрын

Is it “Wrenchy” or Field Daddy?

@tacklebox6239

2 жыл бұрын

@@chadrides914 it’s the grand Reamer to you.

Cam needs to do a comedy show..lol

@TekamoHD

2 жыл бұрын

Hahaha Cam's a really funny dude for sure

Cams got the jitters

Wow, great job with your helper 👍👍👍👍

@TekamoHD

9 ай бұрын

thanks for watching!

Great video! I laughed on multiple occasions and it made my work day more enjoyable. Nicely done! 👍😁

@TekamoHD

Жыл бұрын

Glad you enjoyed it! We’re working on a lot of new Service Call episodes for 2023!

@markm0000

7 ай бұрын

I laughed so hard with the ladder

Good morning, next time, before dismantling the head cylinder, disconnect all 2 flexible hoses of the cylinder. Plus, if you disconnect all tubes and flexibles when the rod is at final strokem, open and close, you will find high pressure on the cylinder camera. Good for washing face by hyd oil ( as your video !!!! ) Mantein the rod not at maximum or minimal stroke Tks

Ahhh.....a mechanic comedy show.😄 Maybe Josh puts his cap on toward he can think straight.

Ah, Red Green. You make me miss my service truck.

To release hydraulic pressure, flip the little switch below the seat. Crank the machine with the implement lockout lever down. Now that you have pilot pressure while cranking, Run the controls

One time as an apprenti, I had a lift cylinder off A D8R, we had it vertical pulling the rod out with a chain fall. Then my J-man’s wife comes to talk to him, so there standing to the side and Im blindly yarding the chain lifting out this rod. Welp, the fitting was pointed in their direction and when the piston got to the top, it blasted all the all all over both of them…….whoops. Lol.

@TekamoHD

2 жыл бұрын

LOL what happened after?

Try a closed end vise boss. Keeps all the road schmoo out of the innards.

Freezer swiss rolls homie

My guy said safety comes last 😂😂😂

Great job,, very interesting I'd like to work with such a supervisor

Thank you boys great viewing

@TekamoHD

2 жыл бұрын

Thanks for watching man!

And that's how you get a repeat customer, not inspecting the barrel! 👍

Go to Makita impacts and never look back I have both high and mid torque I'm happy with them so far I don't use them everyday mind you. I bet you will have todo a rebuild on that cylinder the seals on the piston have been disturbed.

@BluTechEquipment

2 жыл бұрын

When time permits we will probably reseal it fully, but this was a cheap option to buy us time. Realistically those seals are disturbed everytime that cylinder cycles anyways but I get what you're saying, things never go back the same way after being run for so long.

Hello from Texas Just found your channel yesterday and am starting to love the humor and work. But what made you wanna do what you do and work 15 to 20hr days ??? Should do a Q & A video.

You didn't take the nut off and reseal the inside of the cylinder head or gland. There are packings and o-rings in there that are critical for a proper seal for the hydraulics. What you showed was half of the job. The easy half.

why did the senior mechanic not deenergized the cylinder lines of pressure. that was a close one

2:30 there isnt even a lock valve on the cylinder just dont put an impact on a flange go to a hose on the pipe they are ORFS there will be pressure but you can crack it slowly. on a flange the pressure is either sealed or in your face

That Milwaukee sounds like it is all out of beans

@TekamoHD

9 ай бұрын

Yeup… 💩

Carson is gonna be the star

What is in cams ear, are they custom ear plugs or ear buds ?

Can you do a whole video on hack for making seals radial seals etc , backing rings, o rings etc that aren’t trashed but not in perfect shape kind of little tricks you can pull to help save the job for the short term … I’m also HD field tech never had apprenticeship here and only been at is a few years so far.. would love to get knowledge from you all or anyone else who has ideas and tips

Good ole red green

Lol I've also experienced air hooked up to a fairly large cylinder with 3 inch thick rod. My stepdad put air to it while I held the rod end and he held the cylinder. Both flew opposite of each other with enough force to launch the rod with me holding on a good 5 plus feet. Never gonna do that again...

Someone else asked in the comments why he didn’t change the gland seals.. I’m kinda wondering to on why. I have a cylinder pulled out of a e85 bobcat that’s just like this one and someone please explain on why bro skipped that part

i just had an apprentice working with me. i feel you on the do we really need to make 5 trips for 2 tools

My hand hits the 1,2,3,4 mode on my Milwaukee. It’s super annoying, but that might be the issue? But idk maybe not 😆🤷🏼‍♂️

Ps: spit is no joke I always use the heavy loogies on my rod and main bearing rolls!😂

@gulfammuhammad0

2 жыл бұрын

Really OWESOME

Definetly no seat belt 😎

what brand are your ear protection brother? looking at getting some. I work in the same field. love the content!

Do you heat the O-rings to make them shrink?

Yeah I wear a seatbelt.

Disassembled one today, unfortunately they made a change to the partsnumbers so weren't able to reassemble.

@TekamoHD

2 жыл бұрын

Which machine was this on?

@Tmjpwns

2 жыл бұрын

@@TekamoHD next gen 336, New parts ordered from Morton.

your impact is lagging because you have it on 4th setting which is actually a lug nut setting to not drive them on or off to hard keep your impact on 3rd setting you will get full strength

@damajor3216

Жыл бұрын

No. Mine had the same issue out the box. Sent it to warranty. They have a trigger issue right now.

@lunargentleman3750

Жыл бұрын

Mines a pos too after some use

Great video thanks boys I'd be there like shot to help When the repair on mini on

@TekamoHD

2 жыл бұрын

Thanks Jon. Keep letting us know what you want to see.

@jondoherty3884

2 жыл бұрын

Tracks and undercarriage replacement Clutch adjustment or replacement Anything on wheel loaders thanks And does Cam need a old apprentice

@TekamoHD

2 жыл бұрын

Where you from Jon?

@jondoherty3884

2 жыл бұрын

Do you repair off highway trucks

The first part of the video fustrated me so bad I would have a ladder and tools ready instead of going back and forth

I don't wear no fuckin seat belt unless I got someone with me or a cop in front

Jesus just stumbled across this channel and it's pure gold. Freaking hilarious. I'm sure you don't like taking advice from some keyboard knob. But I usually slide the gland back in after draining then put two bolts back in and slide the rod all the way upto the gland then take the two bolts out and pull the rod out. Hashtag just saying...haha I'm pretty sure you don't need advice on how to do your job though. Awesome content.

not mean at all, exactly how my journeymen talk to me as an apprentice and joke around with me. secretly you love your apprentice

Milwaukee trigger failures every time when you need them to work the most; Good work Field Daddy.

@TekamoHD

2 жыл бұрын

Nice to see ya around again Chad. Hope you're doing well man.

Uncle Smegma 22:10

i really appreciate the heavy music in these videos.

I would much rather be outside covered in oil with a view like that than being in an office sitting on my ass looking out the window 🤢

Oil injection doesn't look fjn

Did you grow up watching AVE.

You could tell he the mechanic doesn’t like being filmed

I’m so happy I was never an apprentice. I guess I skipped that step because I know something.

useless engineers should have to watch these videos to see how their designs SUCK.

@TekamoHD

Жыл бұрын

LOL!

Im willing to replace Carson for half the pay.

Are you milking the job???

The reason no one watches yeaaaaah is cause yaaa canaaaadian

Milwaukee isn’t garbage, dudes just bitching cause the shitty situation he’s in

All that cool goes away when your going face 1st through a windshield 😎🥸😳😮🥴🫣🫣😂

@TekamoHD

Жыл бұрын

Well said! 😂

Salute 🫡 just stumbled on your channel great stuff man