Thanks for the video. I’ll give it a shot. I picked up a used jack. Old school. It puns up but won’t stay up. Hope this works. I was always told to bleed with the cap on and pump it then pop the cap and put it back on. You are the second video to do your way. I’ll try it.

@tycoontony21

Жыл бұрын

Hope it works out 4 ya….thanks 4 watch’n

my handle won't tighten...what could that be? The U Joint needs to be replaced?

@tycoontony21

13 күн бұрын

I would suggest looking @ the splines/teeth & make sure they’re all good while twisting your handle

Outstanding !!! now I know how to fix similar jack with same problem...Thank you Tony.

@tycoontony21

9 ай бұрын

You’re very welcome, glad this video help’d

@antuliolopez3222

9 ай бұрын

One day later, the three ton jack is working like a beast...thanks again bro

@tycoontony21

9 ай бұрын

Glad it help’d out my friend

Will try that. I have the 2.5ton Pittsburgh racing Jack(blue). A Christmas gift only a year old but seldom used. It will not pump up hardly and not stay up if I barely get it higher. Will try this tomorrow. Another video said it could be an o-ring replacement job.

@tycoontony21

Жыл бұрын

I haven’t seen an o-ring be bad yet, but if it is, it’s an easy fix my friend

Honestly Thanks it helped me fix my jack!!

Worked on my 6 ton like a freakin charm bro! Was about to trash it.. I figured youtube troubleshooting as a last ditch effort..! THANK YOU!!

@tycoontony21

Жыл бұрын

Glad ur back in business my friend 👍

I ran into this problem today. Not one of my jacks, but on someone else's... that dude destroys everything that he touches.

@tycoontony21

Жыл бұрын

I know a few folks like that 🤣

Great video

Thank you!!!

If u needed to add oil, would it be in the 2nd screw directly under the one you unscrewed?

@tycoontony21

4 ай бұрын

On this particular jack, the flat head screw I loosened to let the air out, would be the spot that I added oil

@dazergurl

4 ай бұрын

@tycoontony21 ok thanks 😊

I have the exact same jack and it will not lift my car, I used it a month ago and it was fine , so I'll give it a shot. Thank You!

@tycoontony21

2 жыл бұрын

Hope it helps

@frankbiz

2 жыл бұрын

@@tycoontony21 Yes, got it to work, it would go up but couldn't lift a load, that did the trick. Thanks again! 👍🏻

@tycoontony21

2 жыл бұрын

@@frankbiz glad it work’d out

Thank you worked for me

thank you very much

@tycoontony21

Жыл бұрын

Glad it help’d u…

Will try

Cool......I appreciate this....

Thnx for this video

@tycoontony21

Жыл бұрын

Glad it help’d…

Rite on brother 👍

Could be a bad o ring my craftsman jack pitted and cut the o ring and did that same thing.

@tycoontony21

3 жыл бұрын

U r very right, thanks 4 the info & watch’n the video

@purrfectsecurity2809

Жыл бұрын

I literally can’t find any video on how to fix that issue, because mine has been filled but still doesn’t Jack! When I pulled the pin out though, one of the 2 o rings is broken in two pieces. Was wondering if that could be why??

Didn't work for me. Plenty of fluid in the reservoir. I did hear air come out. Did everything like you said. But it won't pump up like normal. It's like it's only pumping on the last 1/3rd of the pump if that makes sense and only lifted to about 8 inches out of 20 something. What else could it be. I added oil to it and everything.

@tycoontony21

5 ай бұрын

I know U said U “heard” air, but I would suggest to double check & pump the hell out of it & make sure u got all the air out.

@tycoontony21

5 ай бұрын

I know U said U “heard” air, but I would suggest to double check & pump the hell out of it & make sure u got all the air out.

@leegarcia81

5 ай бұрын

So I pumped UT with the release open several times. Maybe 10. I can do 40. 40 seems like pumping the hell out of it. How much oil is touch oil? When I first started pumping it after filling the oil it over flowed. I can take some out if it needs some degree of air space. I'm not ready to give up on it yet

@tycoontony21

5 ай бұрын

TBH I really don’t know unless the lift cylinders are gone 2 crap my friend

@Sales-rq3nd

2 ай бұрын

Check to make sure that the 2 cylinders springs in between the back wheels on the jack below the jacking handle make sure they're both going down and back up. Sometimes one or both will stick.

Hommie you getting me dizzy

@tycoontony21

Жыл бұрын

My bad, it was a spur of the moment video & it kept auto adjust’n the camera…thanks 4 watch’n tho

Mine pumps but rapid pump quit. Any ideas ?

@tycoontony21

10 ай бұрын

Make sure U get all air out of it

@markarmstrong3394

10 ай бұрын

@@tycoontony21 thank you

@markarmstrong3394

10 ай бұрын

@@tycoontony21 it's been sitting along time. Crazy

how about move the camera around more while you grab the flathead and make me dizzier

@tycoontony21

Жыл бұрын

Or watch another video…

@budsodalsky

Жыл бұрын

@@tycoontony21 I ended up doing that yorn made me dizzy

@budsodalsky

Жыл бұрын

@@tycoontony21 Good thing you're a Tycoon because you won't make any money in video graphy - Honestly - I do appreciate the video - it helped me fix my jack 👍

Tried it. Didn’t work for me, unfortunately.

@tycoontony21

Жыл бұрын

Make sure 2 pump out all air & add enough oil. If that doesn’t work, the actual hydraulic lifts could be bad.

@Koko-qs8zx

Жыл бұрын

@@tycoontony21 Tycoon, I think you’re right. Thing is ….it’s 3 years old and been used 4 times. PITA! Thanks for your reply.

I wish some people would LEARN how to record ,before attempting to upload a video, maybe edit it or something but showing when he moves the camera all over showing areas ,floors etc, that don't need to be here and moving the freaking camera all over! I stop and click do not recommend!!!

@Dr-YouTube

11 ай бұрын

You cryin boy? Why don't you run off and grab a whaaburger and some french cries.