I got into modding consoles by fixing old broken ones too - my childhood gameboy suffered from pretty bad battery corrosion, but I was able to fix it after watching some YT videos, which then led me to seeing how relatively easy modding was, and here I am, thousands of dollars later lol. Great video as always, Tito!

@MachoNachoProductions

2 жыл бұрын

Thanks buddy! We gotta stretch that dollar as much as we can. This hobby can get expensive if we don’t 😅 cheers buddy!!

wow this is perfect, ive been finding these discarded 360 Slims at a local record shop for less than $10, and they are all very similar to this one. just needs a bit of love and most of them will work!

@MachoNachoProductions

2 жыл бұрын

Nice dude! Yeah they’re pretty robust machines, I’m sure you could fix them up nice

@semdonk6593

Жыл бұрын

I'm about to try this in a couple weeks saw one for around $5 where it only doesn't read disks

There exists insulation foam tape for insulating doors and whatnot at any home improvement store. Should work fine for this. Just measure your width and foam depth and buy a roll of it.

@MachoNachoProductions

2 жыл бұрын

Yeah, I thought about doing that. I’ll need to get some thing foam

4:14 an easy way to access this tab is removing the sticker. It has a hole near the Dolby Digital logo, just put something like a paper clip and it releases the latch. Doing as shown works too but it can scratch the plastic

Man I did this like two months ago and I really struggled with those tabs on the back lol I wish I had waited for this. Great video as always, I'd love to see a RGH vid in the future or a PS3 Slim restoration.

@MachoNachoProductions

2 жыл бұрын

Thank you! Ill have to go an rgb for sure 👍

It was really satisfying to watch you clean and patch up this 360, and was a good reminder for me to give some love to my older consoles as well. Thanks for another great video, even if I was a little sad that you didn't say T 10 Torx screw another fifteen times during reassembly! 😂

@MachoNachoProductions

2 жыл бұрын

Thank you Nathan! Haha, yeah there are certainly a lot of t10 torx screws on the console 😅

@jessragan6714

2 жыл бұрын

Hey. Just be glad he didn't say Torx SECURITY screws. The PS3 Slim has those and they're a right pain in the tuchus.

Very timely, I just acquired one of these slim consoles. Very nice that I don't have to go searching for a good tear down video.

@MachoNachoProductions

2 жыл бұрын

I hope it helps you 👍

Good video, I do what you do and look for broken consoles, mainly when the disc drives don't work as that's the easiest fix for me at the moment as I learn more and more. Plus if something has a USB port or memory card slot, you can pretty much make anything work again one way or another.

There is something therapeutic about watching you disassemble, clean, and reassemble the 360 back to working condition.

@MachoNachoProductions

2 жыл бұрын

Disassembling, cleaning and repairing consoles is super satisfying. Totally agree!

I begin to watch your vídeos just a few days and I'm loving the quality and how patient you are.

@MachoNachoProductions

Жыл бұрын

Thank you Ednaldo! I’m glad that you found my channel and that you’re enjoying the videos! Cheers!

Great video! I have a 360 Slim that quit connecting to controllers. I also have one with a stuck disk tray. Looks like it’s time to tear them down and do a refurb. I can see you take your time and do it the right way. So I will be following this video to tear them down.

@MachoNachoProductions

2 жыл бұрын

To fix the connection issue you could probably replace the Rf board. I’m sure you can buy one for cheap on eBay👍 and replace it while doing the refurb 😁

@stephenshelottiii3272

2 жыл бұрын

@@MachoNachoProductions thanks for the tip.

Great video Tito. Brings back memories of the 3 xbox 360s i went through with RRoD. Sadly they are deep in my family garage 9000km away. I am trying to gift them to a friend who will do a restoration and repair. Long live the 360. Please do a 360 controller repair and upgrade in future videos.

@MachoNachoProductions

2 жыл бұрын

I’ll definitely have to look into doing some controller repair videos for sure since those tend to fail often 👍

Thank you so much for the shout out! Lots of love from our channel to yours!

@MachoNachoProductions

2 жыл бұрын

Absolutely brother! I should be thanking you though 🙏😁! Cheers buddy!!

Found the video and the channel out today, because KZread recommended this one to me. Great video, subscribed. Though I have to disagree when you say "a 360 without a disc tray may as well be a massive paperweight" lol

@MachoNachoProductions

2 жыл бұрын

Thank you so much 🙏 I hope you enjoy some of my other videos 😁

Great instructions on disassembling the system. This system definitely requires more patience and coaxing to open up.

Great video! Just learned about 303 Aerospace Protectant. I've restored a couple of the fat model Xbox 360's and will be restoring one of this same model slim one soon. The disc tray issue could have been the rubber band is slipping. Easy fix by cleaning it or reducing resistance of the tray (like you did). Check out the 360 game Ninja Blade.

I own a Japanese X360 launch model, and I bought a PAL version of the slim (looked exactly like this one) to play games that were locked to the PAL region. Many of the X360 games were region free so I survived on my Japanese console. But Gears of War 3 was locked so bought my slim to play that. Unfortunately I was burgled and they took the slim console, but left the older fat console which I still have to this day. Had to disassemble it a couple of years ago due to the same issue - the drive didn't eject. Turned out to be the rubber eject belt that needed boiling and the drive itself needed cleaning (especially where the belt touched; it gets dusty and oily over time). Enjoyed the video!

@MachoNachoProductions

2 жыл бұрын

Dude, sorry to hear about your slim, but glad you were able to fix your other one. Happy you enjoyed the video buddy 🙏

@truecauseofchaos

2 жыл бұрын

@@MachoNachoProductions Cheers fella!

I feel exactly the same and got into retro games in the same way. Great work Tito!

@MachoNachoProductions

2 жыл бұрын

That’s awesome Scruffy! Glad you had a similar start to me getting into retro games! I absolutely love making old beat up console look new 😁. Cheers buddy!

are you planning on revisiting the original 360 versions? i'd love to know about replacing the stock fans with something quieter, or maybe even if it's possible to upgrade the disc drive to something that is better and quieter, stuff like that. great video!

Lowes sells garage door foam. It’s the same style of foam but sold in rolls. Make sure to get the correct height when purchasing. I’m certain there’s a way to get that foam in sheet form as well for the other gaskets.

Love the content! Also I really appreciate all of the work you put into the production value of your videos, they’re a joy to watch.

@MachoNachoProductions

2 жыл бұрын

Thank you so much Tyler! So glad you’re enjoying the videos

The honor was all mine. If anything I want to thank you for helping me clear out my garage. Sometimes I feel like I am drowning in broken consoles over here! 🤣

@MachoNachoProductions

2 жыл бұрын

That sounds like a good problem to have 😁👍

I’d love to see a tear down and clean of a 360 E. Been thinking about getting me one.

this cleaned up really nice, well done!

@MachoNachoProductions

2 жыл бұрын

Thanks JuicyJake 🙏

Would love to see more refurbishing videos like this from you…great video Tito

@MachoNachoProductions

2 жыл бұрын

I am definitely planning on doing more 😁😉 I really enjoy cleaning up and repairing these consoles! Stay tuned Ethan!

I can't believe how good it looks after cleaning! Good job Tito!

@MachoNachoProductions

2 жыл бұрын

Thanks Ricky! I really love the results too 🙏☺️

Great guide! One suggestion that I'm sure you did, but didn't mention on the video, is to check for leaky or bulged caps.

Great video. Love to see any hardware open to give life back

@MachoNachoProductions

2 жыл бұрын

Glad you enjoyed it!

The thought of disassembling things makes me so nervous but I'd love to be able to give some tlc to my older consoles like this 💖

@MachoNachoProductions

2 жыл бұрын

Find the cheapest broken console you can and give it a try 😁

Another great video. Of note, what is the grease that you applied to the rails on the optical drive? I think I have a 360 that is heading towards becoming prone to failure with opening. For jrpgs, you might consider the system exclusive, Magna Carta 2; and one of my favorites, Lost Odyssey.

Thanks again for yet another great video! We see a lot of the older generations get love in regards to mods. But what about this gen? Are there optical emulators, video output mods etc like we see for older consoles?

@MachoNachoProductions

2 жыл бұрын

I’m glad you enjoyed the video! I think because these console are very modern by todays standards we don’t see too many mods, but there are definitely some! I’m planning on doing videos on them hopefully in the near future. Stay tuned 😁

11:13 No one but TronicsFix can apply the Perfect Amount of Thermal Paste™

@MachoNachoProductions

2 жыл бұрын

This is true!

Amazing resto and editing. You earned a new sub. Cant wait for new content

@MachoNachoProductions

2 жыл бұрын

Thank you for the sub Daimien 🙏 glad you enjoyed the video!

One of the things you can do with a finicky DVD is to remove the belt and boil it for a couple of minutes keeping it off the bottom of the pan, this restores some of the elasticity so that it doesn't slip, or you can simply find replacements as the belt is often time one of the biggest issues with these. I RGH'd 2 then converted to RGH 3 on mine. I put a 2 TB drive in it and no longer have to switch disks and since I don't play it online as I have a Series X for that it makes for a better experience.

@MachoNachoProductions

2 жыл бұрын

Yes! Thank you for mentioning that. It can be a great solution if you can’t get a replacement

Spectacular video! Thanks a lot helped a bunch.

Love your videos, keep them coming

Great vid Tito, as always. I'd love to see one on a PS3 restore, and some tips on fixing YLoD and replacing those NEC Tokin capacitors. I can use some guidance saving my PS3 😉😉😉

@MachoNachoProductions

2 жыл бұрын

I would definitely love to make a video about that. I’ll be in the lookout for a YLOD ps3 😁

I used to mod my old 360s with electrical tape to make matte black disc drives, I enjoyed the video by the way, I’m now going to watch all of your videos since this one was so entertaining lol

@MachoNachoProductions

2 жыл бұрын

Thank you! Hope you enjoy the other videos in the channel

@cannerbal

2 жыл бұрын

@@MachoNachoProductions thanks man have a great day/night

When you put the heatsink block back onto the CPU and I saw the copper bit, I had thought you put it back on upside down. WAs very confused until I went back and realized that it was suppose to be that way. So used to the copper being placed on top of the CPU, lol

really nice work on this one

It's alive! Great job. 🔥🔥🔥🔥

@MachoNachoProductions

2 жыл бұрын

Thank you Kill-9 🙏☺️

I love this type of video from you, you always have a great presentation when doing your videos you go slow and explain everything. 360 we can mark as check, I'd say do everything you want to do, I personally like PS3 videos like this, but skies the limit if I had to suggest directly maybe N64 so there you go good luck and keep up the great work!

@MachoNachoProductions

2 жыл бұрын

Thank you! I definitely want to do a ps3 video 👍

@destindude1978

2 жыл бұрын

@@MachoNachoProductions I'll be waiting and watching 👀😎

Love the videos. One thing that I’ve been trying to find is a noctua fan mod for the Xbox 360 slim.

@MachoNachoProductions

2 жыл бұрын

That would be great! So far the slim is pretty quite. But noctuas are always great!

Always loved the look of the slim 360, simple and elegant

@MachoNachoProductions

2 жыл бұрын

Agreed! It’s a very tastefully designed console. I also really like the beeps it makes when turning the console on and opening the dvd drive

You call it a metal spudger, I call it a dab tool 🌿💨🤣

I just picked up a 360 slim off of eBay. I think it's in a good spot, price wise, for somebody looking to buy. I saw a bunch of examples that people weren't even bidding on and was able to grab a 256gb Holiday Bundle model with 12 games and 2 controllers for $39 + shipping. Yeah I couldn't believe it either especially as it was verified working. I would like to clean and re-paste it, though since it is getting on for a decade old. I think I need to get myself one of those metal spudgers first though.

Hey Tito, Really enjoying your videos. Some great exclusives are Fable (Anniversary for 360), Fable 2, and Fable 3. Those 3 games have been some of my favorite games of all time and to this day am disappointed that they have mostly been forgotten about. If you end up trying them too, I really hope you like them.

@MachoNachoProductions

2 жыл бұрын

Thank you John! 🙏! I’ll definitely have to check them out! I’ve heard good things about fable

Great channel Tito, love it, really well made videos and easy to follow instructions 👍🏽

@MachoNachoProductions

2 жыл бұрын

Thank you Woody! So glad you’re enjoying the videos and the channel 😁

Great video! Awesome restoration!

@MachoNachoProductions

2 жыл бұрын

Thank you Ariel! 🙏

I have a similar interest in fixing things like you. have you ever done any video tutorials on fixing broken PS Vitas?

@MachoNachoProductions

2 жыл бұрын

I haven’t made any vita videos yet, but it is definitely on my to do 👍

@77MyEsha

2 жыл бұрын

@@MachoNachoProductions Good to know. Thanks. I've Subscribed.

Nice video, what IPA are you using? Looking to breakdown my first 360 and seen conflicting opinions on the % to use and so on

It's always a cool thing to see a console in sore shape getting a good refurbishing 👍I've been hoping to do something similar for an original model GBA, though the only ones I've come across are in too good of a condition for it to be necessary. That, and it would leave me with a lot of spare parts I'd feel guilty about throwing away lol 😆

@MachoNachoProductions

2 жыл бұрын

Haha same! I have so many spare parts laying around. I need to organize them 😅

Great video and I hope we get to see a RGH3 mod done to it some day 😉

@MachoNachoProductions

2 жыл бұрын

Perhaps 😉

Good job tito... you're great at helping others

@MachoNachoProductions

2 жыл бұрын

Thank you! I really hope so 🙏☺️

Great video. One bummer with those 3rd party hard drives is they don’t support backwards compatibility. I learned that the hard way. If you’re looking for great 360 games, I’d suggest Prince of Persia and Transformers: Fall of Cybertron. Neither are available on new gen consoles and they’re really great.

@MachoNachoProductions

2 жыл бұрын

Oh man that stinks. Is it not backwards compatible with older 360 models? Thanks for the recommendations! I’ll definitely have to look into them!

@ScottBaker38

2 жыл бұрын

@@MachoNachoProductions Sorry, what I mean is that you can’t play original Xbox games on the 360 unless you are using an official Microsoft hard drive. I don’t understand why, and there’s probably an exploit to fix that, but it’s annoying.

@drboom2

2 жыл бұрын

@@ScottBaker38 it's as easy as connecting it to a computer, running FATXplorer, and rebuilding the compatibility partition.

@garrettkazuma207

2 жыл бұрын

why not RGH3 your xbox 360? you can use hacked BC files that can play more OG xbox games than official ones from microsoft. loading them from the HDD is also better and faster as well.

@CAPCOM784

2 жыл бұрын

@@ScottBaker38 I never knew about that? Glad I purchased a brand new 360 hard drive made by Microsoft before Target got rid of their last little Xbox 360 stuff a few years ago!

Hi Macho Nacho. I've been a follower on your channel for a while now. I love your tutorials and videos. Can you do the new RGH 3 mod on this console? I would love to see this.

@MachoNachoProductions

2 жыл бұрын

I’m definitely planning on doing future mods to the 360 now that I have a working one 👍😁

great work. akai katana looks great on the 360, marvel vs capcoms runs good , raiden iv, deathsmiles, otomedius are nice shmups!

i've taken everything apart and thermal paste it comes sometimes today i can't wait to play online mw3 mw2 and bo1 again super happy

Yo! I'm pretty sure whoever donated this xbox got it from my eBay store in February. If so, great job! Just found your channel a week ago and love the Gamboy mods. Cheers!

@MachoNachoProductions

2 жыл бұрын

Haha! Nice!

Awesome work, congratulations! 👍 I'll recommend you to play panzer dragoon orta from the original Xbox through backward compatibility :) Recently I also recovered an Xbox 360 with the no power issue. I found later the laser is also bad and I'm still waiting for the replacement to arrive. Hope that brings my console back to reading disks again. Keep up the good work and thank you for the great content.

@MachoNachoProductions

2 жыл бұрын

Awesome dude! Thank you. Best of luck on the repair 👍😁

This legit took me all night to do but thanks man.

this video got me wanting to take apart my brothers Xbox One Slim to clean it and give it new thermal paste. it runs HOT and it’s probably nasty on the inside

I watch all of your videos. You just make high quality movies.

A very enjoyable video! thank you Tito , great work as usual !!

@MachoNachoProductions

2 жыл бұрын

So glad you enjoyed it buddy 😁 thank you 🙏

Loved the video! I recommend playing Lost Odyssey, check it out for sure!

@MachoNachoProductions

2 жыл бұрын

Will definitely check it out! A lot of people have been recommending it 😁

Hey, just an FYI, there is a small hole behind the sticker near the power port. Sim card eject size hole. Makes it pop easily.

This was a great video! What was the grease you used for the disc drive?

@MachoNachoProductions

2 жыл бұрын

I use shin etsu great. Very high quality Japanese stuff 😁

@Mospen

2 жыл бұрын

@@MachoNachoProductions awesome, thanks for the info!

You don't actually need foam to completely surround the fan. Some revisions only use three rectangular pieces of foam (about 1/2 inch long) to dampen the vibration of the shroud.

hello I'm a new viewer to your channel great video on how you restored 360 Slim. I have 360 first model keep up the great work that you're doing watch love your future videos soon

@MachoNachoProductions

2 жыл бұрын

Thank you Roberto! So glad you’re enjoying the channel!

@robertootero8535

2 жыл бұрын

​@@MachoNachoProductions you're very welcome I have a question, I own the 360 the first model I just recently bought the Kinect for my girlfriend unfortunately since the system doesn't have Wi-Fi the camera cannot be updated is it possible you can do a an episode a how to troubleshoot the Kinect camera for my 360. keep up the great work look forward to seeing more of your episodes

this is the best disassembly video on the 360

another great video, Tito. I just bought one of these a couple weeks ago. How very serendipitous for me ;)

@MachoNachoProductions

2 жыл бұрын

Thank you Hector!! Awesome you just got one too! Hopefully my video will be helpful! Cheers buddy!

OOOOH YEH that's the good stuff. More restorations please!!!

@MachoNachoProductions

2 жыл бұрын

Thank you 🙏! I definitely think I will be doing that 👍

Lost Odyssey was another 360-exclusive JRPG that was absolutely fantastic, and features Nobuo Uematsu's work as well.

@MachoNachoProductions

2 жыл бұрын

Wow, nice! A lot of people have been recommending it. I will definitely be picking it up ☺️👍

One year later. How is the 303 holding up? And do you still use it on more recent projects? Great video. Had to come back as I just found one for $13 at a thrift shop. Time to see what crazy things can be done with it!

Thank you very much, you are so helpful 🙏

Just so you're aware. There's a pin sized hole under the sticker below the warranty seal. Unlocks the tab much easier than trying to pry it with a spludger 👍.

@MachoNachoProductions

2 жыл бұрын

Oh nice! I didn’t even notice that. Thanks for the tip!

Awesome job, Tito! I'm on the prowl for an XBOX now, lol!

@MachoNachoProductions

2 жыл бұрын

Haha nice! Thank you so much Todd! Fantastic talking to you the other day! Cheers buddy!

McMaster carr sells various types of foam tape for industrial use. If you need a very specific thickness, you might have some luck browsing their catalog!

Pro tip for the foam gasket around the disc drive. Just cut it where the 2 halves of the drive meet. I've seen them be so crusty and dusty that they won't stick back on properly.

@MachoNachoProductions

2 жыл бұрын

That’s a great tip, thank you 👍

Very cool. Could you make a video on the rips v5 non tv out ips kit for the DMG Gameboy?

If you like shoot em ups, there are a couple NA releases for the 360. Akai Katana, Raiden IV, Raiden Fighters Aces, Deathsmiles, Otomedius Excellence and Wartech.

@MachoNachoProductions

2 жыл бұрын

Nice! These sounds awesome! Will be sure to check ‘em out!

Ironically my experience with console repair started with the original 360. After having my day one get the red rings I wanted to save money so I’d look up common issues then I’d look up how to fix. Most of the time it just needed all dust removed new capacitor then It’d work again. I also would inspect the power brick.

i delid the IHS on the XCGPU to replace the dried crusty thermal paste under it too. It is not as hard as a PS3. Replaced the polymer caps with higher quality ones for longer service time. The low quality polymer caps are pink in color. Blue, dark Red color are better quality ones and hopefully don't require replacement. faulty caps do cause RLOD. finally RGH3 is installed for unlock the xbox's potential especially using hacked backwards compatibility files for OG xbox games and using bigger HDDs.

@MachoNachoProductions

2 жыл бұрын

Nice dude! I’ll have to look into doing those preventative maintenance measures. Thanks for the heads up 👍

@garrettkazuma207

2 жыл бұрын

@@MachoNachoProductions you have to be careful when you do the delid. there are smd capacitors near the edge on 1 side. xbox 360 S and E doesn't really need a delid as they run cool and quiet compared to phat ps3s especially with increased fan speeds through dashlaunch or freestyle dash. I bought 2 kronos (jasper v2) xbox 360 for cheap and sent them to get the 1500uF and 820uF capacitors replaced with polymer caps too. i can't melt the solder with my hakko soldering gun. the person who did it said he had to use 700C. these 2 kronos xb360s are set to be reliable for years to come. with RGH3 and aurora dashboard, games converted to GOD format on the internal HDD runs like a dream. no noise from the dvd drive. I haven't tried a SSD but i'm sure with it, it would be the ultimate XB360

I found my 360 in a recycling center. It was dusty, missing the face plate and was smelling cat pee. It was dusgusting, but after a good cleaning, working absolutely fine! And i love playing Forza motorsport 4 on it! Mutch better than Gran Turismo imo...

@MachoNachoProductions

2 жыл бұрын

Awesome! I’m glad you were able to save that 360! I’ll have to try out forza!

@jessragan6714

2 жыл бұрын

But the cat pee smell comes back whenever you play Samurai Shodown Sen or Sonic 2006.

RGH mod next? You don't need a glitch chip anymore, just a raspberry pi pico to overwrite de nand (some models) and a postfix (some models)

@MachoNachoProductions

2 жыл бұрын

We’ll have to see 😉

this is nice for the purposes of the video and all but curious what would you do had it not worked? eat the cost and buy another for the disc drive and swap those parts? if so, what then with the 360 leftover, sell it? can you talk about that?

@MachoNachoProductions

2 жыл бұрын

Since the system was working expect for the drive, I probably would have purchased a replacement optical drive. I was actually looking online while making the video incase I couldn’t repair it.

Kameo is also a really neat 360 exclusive.

@MachoNachoProductions

2 жыл бұрын

Awesome, thank you for the recommendation!

Appreciate it I have a Xbox one s that I don’t even play and a ps4 but now I will be having the 360 issue fix so that someone else could enjoy 👍

Dude 3M do felt or foam anti rattle tape you should make any replacement foam gasket with that stuff and the foam version comes in different thicknesses and both have a selection of widths

@MachoNachoProductions

2 жыл бұрын

Will definitely look into that, thanks for the tip 👍

Great and helpful video! Would anyone mind answering what kind or grease to use on the disc rails? I'm going to do my first disassembly and maintenance on a 360 s I picked up recently and just want to be ready. I'm also planning on putting a corsair premium thermal paste and hope it's good enough!

Nice cleaning guide, Tito :) Ever thought of RGH modding an XBOX 360?? In case of future failure of its disc drive. They are all going to fail eventually :(

For the foam gasket you can try those foam strips that come in different witdh and thicknesses

@MachoNachoProductions

2 жыл бұрын

I’ll definitely have to look into that. Thank you 🙏

Great job with the repair. My personal favorite Xbox 360 game, was Lost Odyssey. One of if not the first game by Mistwalker studios. Honestly, if you love JRPG's, I'm not sure if it would be possible for you to dislike it. Give it a go!

@MachoNachoProductions

2 жыл бұрын

I’ll definitely check it out! A few other folks recommended it too. Sounds like a winner 😁👍

@yellohammer8571

Жыл бұрын

​@Macho Nacho Productions There's Kameo and Perfect Dark Zero, two launch titles for the 360 made by Rare, the creators of Battletoads and Banjo-Kazooie. I would recommend them to you, along with Gears of War by Epic Games.

Great vid!

@MachoNachoProductions

2 жыл бұрын

Thank you!

Your 360 refurbishment experience went much better than mine did; I had to clean roaches out of one!

@MachoNachoProductions

2 жыл бұрын

Oh no! I hate roaches 😅

I hate that hidden tab. Apparently you can stick a pin through a part of the sticker to get it open. For my personal consoles I just bend the tab back so it doesn't latch when I close it up cause it's such a pain. Btw, one of the long black T10 screws holding the metal cage on may or may not be under a sticker. Most of the time it is. Also there's an X Clamp removal tool available on Weekend Modder that makes the process much safer and easier. It also puts all of the pressure on the heatsink and X Clamp instead of the board when reattaching the clamp. I strongly recommend it because it's easy for the screwdrover to slip out of place and gouge the PCB when removing or to bend the PCB when reattaching. 360's have pretty thin and flexible PCB's so you do not want to bend it. Also, when screwing the two screws by the power plug, make very sure not to overtighten them as that can flex the board. Some people have fixed E82 just by loosening those screws. That foam gasket is annoying but when finding a replacement you don't need one that goes all the way around. "Trinity" consoles have one that goes all the way around and Corona ones have just 4 foam points. It's more for vibration than it is for sealing. You can probably get away with cutting some standard form to make a few foam squares and then supergluing them into the fan shroud. Wow that 303 Aerosol really does the trick. Damn I'm gonna pick some up myself

@MachoNachoProductions

2 жыл бұрын

That’s good to know. I may just get some foam tabs for the fan shroud. Also, thank you for all the other tips and tricks 👍 Cheers!

Blue Dragon is so damn good sir! Enjoy sir!

@MachoNachoProductions

2 жыл бұрын

Thank you 🙏

Those adhesive window foam seals should work as a fan gasket.

Yes !!!! Very enjoyable video !!! Fantastic Job !!!! I have 2 XBox 360s. They both Work Perfectly !!!! I now use my XBox 1 most of the time !!!! My Favourite 360 Game is Oblivion, and Dragon Age, Dragon's Dogma and Skyrim !!!!

whether it needs it or not, i ALWAYS replace that rubberband for the disc drive

@MachoNachoProductions

2 жыл бұрын

I thought about doing it. I’ll probably order one from console5. Always good to have some on hand