Thanks a lot! Mate, very clear explanation.

You're truly a savior. I owe you a beer man, thanks

Thank you my Brother. you are a champion. for sure. you're generosity. won't go unnoticed.👍❤

@ThinkFrugal

Жыл бұрын

You're welcome Brother!

@simonelijah5513

Жыл бұрын

@@ThinkFrugal I have MXQ Pro 5g 4k android. It came with Android11.1 4gb 32gb which I am sure are fake specifications. It was extremely slow and the internal storage setting was greyed meaning that you could not open to explore it. Upon opening the case, I found out that it has an MXQPRO_V73 2021-06-19 board and an RK3128H processor under the heat sink. However, the CPUX app showed it has rk3066 and the recovery menu indicates it comes with RK322X. I can only connect it to the computer in maskrom mode and most of the RK3229 firmwares( loader v2.37) flash successfully but won't boot( including the one that you have provided in the link above).Do you have a solution for this problem?Thank you.

Thank you so much Dude. My MXQ pro 4K 5G is now working great...More power to your channel.

@ThinkFrugal

Жыл бұрын

Much welcome!

@mangalapawar9841

Жыл бұрын

Netflix,Amazon prime is also working in this firmware or not ?

Cheers from Brazil! Thanks for the instructions.

You are the best 🤗🤗 My MxQ-Pro is now alive 👍👍

@lomaspegao8442

2 ай бұрын

still?

it works!! wonderful video

Successfully done, thank you very much 👍

Good content kabayan, will do this and I do really like your style, which lacks in most Filipino KZreadrs, "Professional". Hindi mo nginungudngod mukha mo sa screen, malikot ang kamay na parang ma epilepsy, walang kabalbalan vfx/sfx at nakakabwist na 100x na pagsasabi ng "guys". Will follow your futures contents, thanks!

@ThinkFrugal

Жыл бұрын

Thanks kabayan!

ITS REALLY WORKED LOL THANK YOU DUDE

You are the best bro thank you a lot 🙏👏👏

thank you for sharing. Have a good day

Ang galing ko idol medyo nose bleed ako sa english mo pero naiintindihan ko ng mabuti salamat lods!

Thanks from Brazil !🤝👍

Thank you very much. I did it. I very happy. Thanks again ❤

salamat sir. eto hinahanap ko matagal na. mabuhay ka

@ThinkFrugal

2 жыл бұрын

Happy to help!

Thank you brad! Try ko kung puwede sa old MXQ ko. 👍😊

Legit. working great on my fake MXQ pro. salamat po sir..

Thank you man ...🥰🥰🥰

Thanks for posting this! Is the linked firmware still the latest?

Salute to you boss. napaka ganda at linaw ng explanation. Na upgrade ko na yung firmware ngbsa akin saka napaka smooth. unlike nung previous FW niya mabilis pa tumakbo yung lumpo 🤣🤣🤣

Great explanation, Any ideas on how to flash custom rom on a smart tv running Wisdom share android rom?

wow ayuzz

Thank you My brother

Works on my box (RK3229 | ESP8089). Thanks for sharing.

@krazycat04

11 ай бұрын

same firmware po ginamit niyo na nasa video?

@androidbox922

11 ай бұрын

@@krazycat04 yes po

@autosecumalaysia

9 ай бұрын

Could you share the firmware. Am not able to find and download from recommeneded sites. Thank you

@RommelRamirez

8 ай бұрын

pano nyo po napagana yung wifi? hindi kasi nag aappear wifi sakin , same rom sa video ang ginamit ko, ok naman sya, kaso walang nade detect na wifi. ang rom at wifi ko ay same sa inyo

@DaddyIppsTV

7 ай бұрын

Hello, paano nyo pi napagana? Gagana lang yung internet sa akin after reflash ng firmware pero kapag nirestart or nireset ko na yung device. Ayaw na mag connect.

Thank sa tutorial, gumana din sa wakas yung mxq ng ate ko, stock logo

@ThinkFrugal

2 жыл бұрын

You're welcome, happy to have helped someone!

thanks bro its working

Question about this. Does this make the device show its actual specification or does the firmware still spoof the device's info like the android version it runs?

Wow! I got my firmware from one of your source links and successfully flashed my mxq pro ...thanks a ton ❤❤

@jithinjithu2281

9 ай бұрын

Sir how to get pls inform me

@WINDOWS94198

8 ай бұрын

ano meron sa bago? parang the same lang yata hahaha

Work perfect

Thank you very much my new software is open

U BEST!!!

hey bro, I just opened my tv box and found out that is the RK3228A, almost the same as yours. The only difference is the color of the board xd. But I can not do a backup with your other video. The CMD throw me an error about the copy of the Kernel.img. Any help? Thank you for the video btw, I would like to do it, once I backed up my device.

this is so great bro now im wondering if you could show us how to flash any tablet that's moving very slowly????

Muchas gracias!!!

Thanks to you! I just got one...had audio problem. Tried getting help with the seller from lazada but did not get anything. I tried checking the details and Damn...I got a fake one!!!

I wanna know. is the "Other ROM" compatible with this media box? or have you officially tried it? since i have the exact same MXQ Pro like the one you using, same CPU and Wi-Fi Chip.

thanks its work,but How do get rid of the top UI ?

شكرا لك اخي الكريم عى المعلومات واتمنى لك النجاح

Using Device Info HW as you suggested, I found my MXQ Pro 4K 5G has a 4Gb ROM (but RK3228A + ESP8089). Is it capable of installing any firmware onto ?

good good it works now

Thanks 🌹

hi friend! i have a doubt! i need to change the firmware because my tvbox catched a virus, with this firmware will be oslved that problem? (you know, watching a movie and then a notification of a strange package trying to install itself)

bro do you have firmware for Rockchip RK3228A - SV6256p wifi - same device as in the video. mine got bricked. I tried using the firmware in the description but no luck. please help

HI, I just watched your videos and thanks for your elaborate explanations to intall a new firmware.but my problem is different,my h96 max 4k ultra hd tv box running android 9.0 and after using for sometime my wifi,bluetooth and usb storage access are gone as i couldn't execute anyof them,when i try to update with their latest rom version 11 or 12,its getting struck with the error message'prepare idb fail'' and i don;t know how i could overcome this despite my extensive search in the internet, can you help me

Gracias de verdad me sirvió!!!

Thank You, Success

NICE!!!!!!!!!!!!!!!!!!!!

Gracias

Hi is they a way to install android TV operating system on the rockchip processor?

Después de este proceso, dejara de funcionar el cable de video Av?

Dear brother, I have H96 max x3 android 9 a question for you. The device with me works efficiently, and also the Bluetooth again does not work on my headphones, the Air 2 Neo. It leaves me a message like this. Do you have any solution, my brother?

Hello friend. I got one projector with rockchip rk3128 processor and rtl8727ds wifi driver. The projector was lost anyway, so I wanted to try this rom change ... I found one compatible firmware and connected the projetor to my PC using the USB Male to Male cable ... I managed to flash the new firmware to the projector without errors, but when I plug the energy cable to the projector it starts and turn off right a way ... no Image, no response ... Did I just brick my projector ?

thank you! the firmware upgrade worked. HOWEVER, when the video plays, there is a screeching noise and then the box either freezes, or restarts. would others have the same problem?

Yay, I have one, a scammed one, with one gig of RAM and RTL8189 Wifi. Seams I don't have lucky these time with searching for new firmware. Any suggestions?

how about installing a Batocera on a Rockchip so it can be used as a game station?

Thanks. I reallly enjoy your explanation. It's the same procedure to flashing an armbian image, isnt it? Greetings from Argentina

thank you

Tanks men

Hello. May I ask if this will also work on the SKONE tv box...

I was hoping to follow your guide. But unfortunately I purchased one cheap off ebay. Listing was exactly as yours but the Device info showed. Rockchip rk3128 and wifi as Rk915. Also it was listed as 8Gb but in the memory section it shows 2Gb. I contacted the seller before I received it. To inquire about how the USB ports were white. And ever one I have seen was black. Of course they didn't respond to my message until the day the item was delivered 😔

bro. i already installed the apps device info HW but can't open..do u have any suggestion ..coz In the MBOX there are some problems such as the wifi connection often disconnects by itself and some applications cannot be opened because the time and date are not correct, I tried to fix it but it can't be done automatically. the maximum date is only in 1993 while we are in 2023. really sad.

Bro, would you please updoad the process for TX9 pro for same thing

Brother would me help me pls? I bought a set top box to use the feature casting my tv is not Android. I didn't know that to use the feature I have to buy set top box package otherwise The box is not responding..now big problem is that I couldn't enable the USB debugging option it is blocked..how to establish connection with the box

is there any other download link for the firmware? when i try to download it it stop at 63% and and when i reload it go back to 40% til finish but it cannot be extracted afterwards edit i actually managed to extract it but when i start updating and click upgrade it stop on check chip failed please help. I want to change firmware because the wifi is not working on stock version

Do u have any upgrade than after this??

I would like to know if possible to upgrade a tv box model x88 pro to Android TV firmware and not with mobilephone firmware. THANKS

Hello there. What kinde of software can i go with sdmc dv8919x?

Thanks for the help, it was well paced and clear.. and the apps/software links delivered quickly.... but... the main item, the Firmware, refused to unzip / unpack ...

I have a rk3128 hw version pcb link you provided also flashing success but not boot on my box help with me the firm ware of rk 3128 buddy?

I have Internet problem with this MXQ pro. I can only use the browser after switch on but if I reset android box then I can use everything. again after a boot I face the same problem. What to do now? could you please suggest something Thanks in advanced.

Mine works, just the UI is very slow in general, is there no UI like a normal android UI than i can change to and how

Hi how do i install a bluetooth app on my mxq android box ? I tried to do it but the apps is not there

Hi! I have rockchip 3066, it's the same that 3229? I read that it is, could help me?

bro where is the video regarding the neflix update?

hello,i have the same tv box,i try to fix with this method but, i have problem with the android tool,i try all the version,but nothing,can you help me please? thank you!!!

Do you have fw rk3128 wifi sv6158? Thank you

Hello friend, greetings, a question, I have the mxq pro 4k 5g but my device shows google tv box and on ethernet I get ac300, where could I look for firmwares, thank you

Will this solve the issue where the date and time keeps resetting?

Sir, may firmware kaba sa rk 3229 processor and Esp 8089 wifi chipset?

Is this works on rk3128 chipset box?

Can i use this firmware for my Mxq Pro 4k (rockchip firmware RK3228A RTL8189ES)

Sir gawa naman kayo vid na ganto about skone android tv box. Or same lang sila?

hello the first 2 links to download cannot be opened..... is there another link????

please give custom optimised firmware for Android universal motherboards like RU 10.816A for led tv.

Device not found or load on RKdev tool. If plug power cable then it shows found one loader device. Why not found on RKdev tool via hdmi with male to male cable

Hello good sir, i have a H96 Max 8k ultra hd, i can't find the proper firmware to restore the Tvbox. it's a RK3528 model

please convert this firmware into the format can be installed from sd card

I disassembled the tv box to see the cpu and it is RK3228A but according to the application it is RK3229, so Can I install this version of firmware?

Hi! I did follow the steps but the boot logo will flash then goes to green screen. sitting there for an hour now. please help

My reset button is broken, is there other posibility??

Can you give me firmware for x96 mini android 7.My current android version is 9 and its laggy.I want to shift to android 9 to 7

i have the same box but i can't upgrade the android version from 7 to 10 any idea

terima kasih, perangkatku berfungsi

after the update tv box not work no power on. any way to fix ?

Sir ask ko lang po kung anong compatible na firmware sa rk915A?

obrigado meu nobre !!!!!!

@solracleinad9381

8 ай бұрын

Como ficou melhorou com o sistema novo?

amigo me podrias ayudar con un problema que tengo, me sale error cada vez que intento instalarlo

Hi Sir, question po regarding sa video mo about flashing MXQ Pro RK3228A procie. I have the similar tvbox pero yung sa HW Info it's showing na RK3229 SoC sa box ko pero nung yung label dun sa mismong dime/chip eh nkalagay is RK3228A? Nka encounter nba kau ng ganito sir? Hope tp hear from you soon. Salamat.

Hello, i flash the firmware and it stuck at the white android boot screen, it bootloop, i have the exact same Spec as yours, my tv box is dead, bricked. Rockchip android tool wont detect it on my pc too. Help!