The fact that you managed to get such close up camera angles, while still being able to clearly demonstrate the mods is underrated af, good job man

@YBBK

2 жыл бұрын

thank you! always working to create better content :)

@hugopfeffer4175

2 жыл бұрын

Exactly! When I see videos like these I thought to myself "like the stems ain`t that small". Oh boy, was so wrong. Mine at least is small af.

@TanguySouchet

Жыл бұрын

Underrated af (underrated auto focus)

just started using this lubing tutorial as a guide, and now my parents are back together! thanks mam

@YBBK

2 жыл бұрын

ayo? 😂

@Antley278

Жыл бұрын

Hmmm

@OscarB390

9 ай бұрын

Jit r u ok

@skuskin2000gaming

4 ай бұрын

DUDE my parents hated my clicky keyboard I don’t hear it right 😭but that’s the whole reason I went for a creamy sound

@joselima7655

4 ай бұрын

Lol

The band aid wrap by itself is a HUGE difference in sound and well worth it imo especially for the space bar as it’s a good beginner mod

YOU CAN DO ALL THE OTHER MODS TOGETHER EXCEPT FOR HOLEE MOD OR BANDAID WRAP, ONLY CHOOSE ONE!! I forgot to include this in the video, your stabilizer stems may come pre clipped. If so, you can skip the clipping part. If you are clipping, please make sure the bottom of the stem is completely flat and no parts of the leg remain, in the video, I did not show this. In addition, the bandaid on plate mod only applies to those who what plate mount stabilizers. For those who have pcb mount, you can skip that part. NOTE: I did not include wire balancing in this video, unfortunately at the time I did not know about it. I’d say wire balancing is the one of the most crucial steps in ensuring no tick or rattle. Please consider searching it up and following a tutorial!

@raydenibarrola4162

2 жыл бұрын

yes

@cjrusjerles9075

2 жыл бұрын

so you mean i can only do either the holee mod or the clipping? (as an example)

@YBBK

2 жыл бұрын

@@cjrusjerles9075 You can do all the other mods together except for holee mod and bandaid wrap together.

@cjrusjerles9075

2 жыл бұрын

@@YBBK oh ok thank you

@NJVArtimations

2 жыл бұрын

i did all of em and now my space bar does even make a soound any more hahahahahahaha

As a beginner to mechanical keyboards with no lube, this mod really helped make my spacebar sound as decent as it would with lubing stabilizers, so ty for that :)

@YBBK

2 жыл бұрын

No problem! Welcome to the rabbit hole 😂

@YBBK

2 жыл бұрын

@nena the cat No problem!! Glad I could help you out :)

@31shashank9c2

2 жыл бұрын

omfg man even i have bongo cat as my pfp :DD

@coral5167

2 жыл бұрын

@@31shashank9c2 :O

Amazing guide, as a beginner I've found it very useful. Managed to do all of them except for the leg clipping and works like a charm, really silent thank you!

soo chill and relaxing, and really following up with the tutorial, really great vid!

Bro I just followed this guide and the rattle sound is completely gone. Thank you so much, this is incredible

Fantastic camera work. The closeups on those stabilizer mods are excellent. And the way you showed how to reassemble a stabilizer "make sure the orientation is correct" (paraphrased), was very helpful. I'm about to mod stabilizers for the first time and was actually avoiding doing it because what if I can't get the stabilizer back together properly. (It happened when I first started working with switches.) This video has given me more confidence to go forward. Thank you.

This is so cool. Going to watch this again for my first mod session.

@YBBK

2 жыл бұрын

glad I could help you out :)

Your content is fantastic. Im amazed by How accurate ur tælling the things and How proffesionel you Sound. Good job Im amazed i learnt so much! Keep up the good work.

ive looked at so many videos for these mods and this is the best. thank u

@YBBK

2 жыл бұрын

no problem! glad I could help you out :)

thank you so much this made my space bar sound and feel 1000 times better

thank you so much 🥳, the bandaid mod and wrap really helped removed tick and its quite easy.

The background music and your voice are an absolute gem together man :) Keep it up!

Nic video bro 😎 was looking for your video for so long 😊

Finally a good guide 😎 Keep up the work bro👍👍👍

@YBBK

2 жыл бұрын

Thank you!

Great demo. I'm going to try it.

I did my first holee mod today and it was very satisfying, I used also medical tape tho it somehow tries to slip out of the ramp but I manage to make it stay, also the wires are pre lubed I skipped that part and now it sounds pretty amazing, thanks to this tutorial

@jashuito

Жыл бұрын

i know im a year late, but for anyone else that comes across this the tape/bandaid might slide off due to the fact there is prelubing on it. with lube on it the adhesive doesnt work very well

This was my first time modding a keyboard and was wondering why the keycap was stuck after modding the stabilizers. I cried for about 5 minutes but I came across this video and how it clearly explains that the stem is supposed to be placed in a specific way.. honestly thanks so much dude 😭

@YBBK

2 жыл бұрын

Haha No problem! I also ran into that issue the first time I modded stabilizers so I thought I would make it clear :)

@renex39

2 жыл бұрын

time stamp plz

@renex39

2 жыл бұрын

wherer is it omg i have that problem

@YBBK

2 жыл бұрын

@@renex39 3:50

@spwashh5160

2 жыл бұрын

bro mines still doesnt work

Your channel is underrated af. I really loved watching the whole video.

@YBBK

2 жыл бұрын

Thank you, it really does mean a lot to me :) More content like this coming up!

@emirx1126

2 жыл бұрын

@@YBBK I'll be waiting for them. Keep up the work man. I just got done modding my stabs. The rattling is gone. Thanks.

this is my favourite stabiliser video

The band aid wrap worked! Thanks my guy :)

also this gained u a sub this is super good quality and underrated asf :D hope u grow as ur content is actually really good

@YBBK

2 жыл бұрын

Haha thanks! :)

Did the band aid wrap on the spacebar and it’s 👌. There was a ticking that I could not get rid of no matter how much lube I put and wire balancing I did. Great video man, I can finally type in peace.

Thank you for this. I just did this band aid wrap mod + holee mod along with PE Foam mod and tape mod the thockiness are music to my ears.

best motivation to work on your stabilizers: make korone happy

@YBBK

2 жыл бұрын

man of culture

Best stabs vod ever

first time modding my keyboard and this tutorial helped a lot! thanks!!

@YBBK

2 жыл бұрын

No problem, glad I could help!

Yo This Vid SAVED ME. Thanks So much!

Dude. This has helped my spacebar soooooooooo much! Thank you lord!

Awesome guide, helped me big time first time modded :)

i love you bro, my space sounds godly because uf you

I took my stabilizer out not knowing how it goes in and you demonstrated how to so thank you

@YBBK

Жыл бұрын

glad i could help :)

This was a lifesaver! Thanks!

I really appreciate the amount of effort you took to make this video

@YBBK

2 жыл бұрын

Thanks! I still have alot to learn and striving for better quality content :)

this is so clear would really try this!

my man good video keep up the good work

Such a nice cozy vid :)

holee mod saved my spacebar, now I can't stop pressing it. Ty for this guide.

Damba, finally found a clear and cohesive video about how and what. Managed to make my outemu blue spacebar more thonky and less annoying. Thanks!! Also big props for having top notch youtuber quality editing.

@YBBK

2 жыл бұрын

Haha thanks 😂! Glad I could help you out :)

I’m so happy rn , thank you

Have you tried both the holee mod and band aid wrap on the wire together as one? What would happen

@YBBK

2 жыл бұрын

It wouldn’t work as there will be no space for the wire

Those keycaps are just sick bro!

THIS IS EXACTLY WHAT I WANTED

This is extremely helpful. Thank you so much.

wtf this video is so high quality, this channel is gonna blow up called it

@YBBK

2 жыл бұрын

Thank you! I try to make my videos as high quality as possible and still have a lot to learn ☺️

@Infmso

2 жыл бұрын

@@YBBK that's great dude, keep up the good work!

thank you, I just finished lubing my keyboard！

very helpful! I am going to make my first custom keyboard and this really helped!

@YBBK

2 жыл бұрын

Very cool! Glad I could help you out :)

I recommend using krytox for the wire and the housing and stem. Dielectric grease will make your stabs a bit too mushy. Although I can say your spacebar after those mods do sound nice

@YBBK

2 жыл бұрын

Usually I would recommened 205g2 for wires over dielectric grease as you said. However, in my case, the fabric tape I use is significantly thinner than normal bandaids. As a result, I chose to use dielectric grease. But yes, I should have addressed that.

@solderbuddy

Жыл бұрын

The trick is to use only a little dielectric grease then its not that mushy.

Thanks man this vid helped me quite a bit

thats super clear!..thanks for the close up vid

@YBBK

2 жыл бұрын

Glad it help you :)

You are very underrated!

@YBBK

2 жыл бұрын

Haha thanks!

Why do i feel like im on a date sippin wine while watching this keyboard mod tutorial?

@YBBK

2 жыл бұрын

Ayo?

got my first mechanical keyboard yesterday and its not hotswappable, and all the tutorials I looked up all told me to remove the switch... which I cant ;_; so I'm really happy you included that last segment thank you so much

@YBBK

2 жыл бұрын

No problem! Congrats on the new keyboard lol. However, that segment isn't as detailed as I would have liked it to be. I kind of rushed it. Please refer to alexotos guide, its much more in depth: kzread.info/dash/bejne/oKmi1tmSetO5hbw.html

Ohhhh my gosh thank you so much for this video it helped ALOT i have an rk61 with husky switches and the rattle in the space bar was so much that i almost bought a new keyboard because of it but then i stumbled across your video and watched it. I used the hole mod and the band aid mod around the stabilizer bar and the rattle completely stoped let this be a lesson to try other mods for cheep instead of buying lube and a brush for $30

BROOOOOOOOO THANKS ALOT MAN I CANNOT BELIVE THIS IS THE SAME KEYBOARD I BOUGHT

Thank you very much!! Now my spacebar sounds amazing T-T

Thanks bro this is so helpful it very well made the mod easier on my keyboard. 😁

@YBBK

Жыл бұрын

Glad it helped!

My rk61 space click used to feel so cheap When i did this tutorial ( didnt even lube it) its like a new brand keyboard with different click feelings Im not overreacting when i see its even gives a better experience in gaming too Thanks for this perfect tutorial

Thanks!! this helped a ton.

07:01 my favorite is band aid wrap. :) very effective and fast fixed for cheap mechanical keyboard.

Also an important thing-> The stem of stab. hits the PCB. So you need to stick some patch on the PCB. It should also reduce the noise level and protect the PCB.

@YBBK

2 жыл бұрын

I have noticed other people doing it however, it causes the stabilizers to feel mushy and less satisfying imo. Ig it’s preference but I recommend against doing that

@nadidas2100

2 жыл бұрын

@@YBBK i second this, it does cause mushiness in my experience as well, which is why I opted out of using the stock stabilizer pads that came with my Kbd67 Lite R3.

The before sound was not catastrophic, but the after sounds so good !

Just great instructions big ups!

tysm for the video, imma hop on this rn

incredible vid! would you recommend using latex bandaids for the holee mod?

Lmao cutting that small piece from the stabilizer just broke my keyboard, thank you I’m so grateful

@YBBK

Жыл бұрын

No problem bro

@TheJokingJoke

Жыл бұрын

@@YBBK yo bro my bad I added too much tape and it jammed up like crazy, it works beautifully and I apologize

@YBBK

Жыл бұрын

@@TheJokingJoke lmao all good, glad it worked out

Man I just saw this looking for an easy mod for my stock rk61 I’m hoping this helps but dang bro you deserve wayyyy more subs awesome video!!!!

@YBBK

2 жыл бұрын

Thanks! It means alot :)

@dronebeats8947

2 жыл бұрын

@@YBBK ofc man I’m doing my keyboard rn

Awesome video💯

Very Details View and description. Thank you

Thank you so much this realy helped me

thank you bro i have been trying to get my key board to stop rattling and this helped alot thank you

@YBBK

2 жыл бұрын

No problem! Happy I could help :)

Yoo the band aid mod at 5:00 fixed a problem I wasn't even aware of! I love my spacebar now

Great tutorial!

Amazing video.

you helped me a lot. big thanks

Hi YBBK I just wanted to Thank you for the vid lol my stabilizers were rattling but then I did your tutorial my keyboard got thoccy lol I even used hair wax as lube and it worked 😂

So glad I came across your channel it’s so cool keep it up :)

@YBBK

2 жыл бұрын

Thanks!

Hey man, this is the most helpful vid I have seen yet, and I appreciate you helping me out. I just have one question. When using the space bar, the right side is significantly more mushy than the left. Any idea why?

Thank you! I'm glad i watched this tutorial. I have soldered switches and I'm frustrated with my spacebar stabilizer rattle, I didn't know u can still mod it with the switches on. I tried with the other stabilizers but the spacebar is the only thing that opens might be because the wire is longer there.

@YBBK

2 жыл бұрын

Haha thanks! The other stabilizers should be able to open as well. You might need to try more force or get a flat head screwdriver and pry under while pushing on the latch

@TheG2Z

2 жыл бұрын

@@YBBK i did just that but then the stabs popped out and i cant put them back hahahahahaha

good video my g

Plan on using this guide later on as stabilizers have been giving me the most trouble so far. Esp spacebar. Btw what kind of tweezers do you recommended for this kind of fine work?

tysm i had one of my legs were the other way around and i flipped it and now its so good

@YBBK

Жыл бұрын

Common mistake most people face sometimes myself included as well 😂 Glad I was able to help!

Thank you bro im beginner and i made my keyboard sound good

Great video!

@YBBK

2 жыл бұрын

Thanks!

I dont know what I was thinking, doing this mod with outemu blues wont make it sound any better, but it feels much better, and hopefully when I get some new switches It will sound and feel much nicer than it would without this mod, thanks!

@YBBK

Жыл бұрын

Nice, happy that I could help you out!

this is the video I was looking for. Thank you so much! One question. Which Holee mod is better; Band Aid in the house Stem or band aid around the wire? also I noticed you put tape on the PCB only on the bottom part, why not also the upper part of where the house connects to the PCB?

great video !!!

@YBBK

2 жыл бұрын

Thanks! :)

Note! The wire wrap mod only lasts for a couple weeks. The bandage gets soaked in lube and falls towards the bottom of the stabilizer thus caused the most ear piercing rattle. do it the right way!

@YBBK

2 жыл бұрын

Really? I might be due to different materials, but one of my keyboard with bandaid wrap has lasted for 4 months and still fine

@panikk2

Жыл бұрын

@@YBBK might be because you used medical tape and isn't as likely to change while being soaked in lube and used. But idk wtf I'm talking about just a theory

@YBBK

Жыл бұрын

@@panikk2you might have a point actually, thanks for sharing!

UNDERATED

Sick vid

Bro I can't thank you enough, my spacebar is SOOOOO MUCH SMOOTHER, thx man

@YBBK

2 жыл бұрын

No problem! Thanks for the view and comment :)

THANK YOU SO MUCH!

@YBBK

2 жыл бұрын

No problem, glad I could help you out :)☺️☺️

Sheesh,bob looking fineee

thanks dude

bro that sounds so much better! I'm curious about what switch you used in this vid. Im also trying to find a deep and thoccy switch, any recommendation?

@YBBK

2 жыл бұрын

Thanks! In this video I was using gateron ink black v2s. You should check out oil kings and china joys as well!

This took me a few hours and a lot of brain cells, but my space bar sounds a lot better now even without any grease or lube. I also added pieces of tape on the PCB where the stabillizer makes contact, not sure if that did anything.

@YBBK

2 жыл бұрын

Nice! IMO, the tape on pcb part makes the stabilizers feel mushy but it really depends on preference

hey man, I have another question: I'm using gpl 205 grade 0 to lube the housing and stem, can I also use it for the wire? Or is a thicker grease required? Also would you recommend the holee mod over the band aid wrap? I couldn't really hear too big of a difference. Thanks for the video btw!

@YBBK

2 жыл бұрын

For the wire I would highly recommend a thicker lube like 205g2, xht-bdz or dielectric grease. If you use 205g0, the lube will get displaced very easily and you will have to relube the wires frequently. You could use 205g0 as a temporary fix. Also, I would recommend the holee mod, I believe it’s a bit better in terms of feel and sound.

@6louds644

2 жыл бұрын

@@YBBK thank you very much 🙏🏽

the second mod , tape on the bar , is it on top of the first one ? or just a quick way to improve it without the first mod