🤣 I've been chasing this problem forever and I found your video. 15 minutes and it's back to normal. Good grief. Thanks!!

@CurtARoll

Жыл бұрын

Glad I could help!

This is amazing! Steers like it’s brand new after 250,000 miles. Thank you!

@David-xy5sd

2 жыл бұрын

Mine hase high mileage too, gonna take care of the steering gor sure

I have this issue and you've given me the courage to attempt it myself thank you

Bro!! finally I find the right video with the fix I needed for my truck!!! Thank you!

@jadscott2585

3 жыл бұрын

A trick: you can watch movies on flixzone. I've been using them for watching loads of movies recently.

@jerryjad9971

3 жыл бұрын

@Jad Scott yup, been using Flixzone for years myself =)

Thanx Curt, Great info and instruct. Had a hard time convincing my son the problem was in the steering shaft or gear box. he insisted it needed alignment. Kudos to you for having your son Cameron there with you. Too many kids out there don"nt know anything about cars due to lack of parenthood.

@CurtARoll

3 жыл бұрын

Thanks bud!

@sean.g4516

Жыл бұрын

So was it your gearbox as well? @Daniellongoria3470

Buddy and I just replaced all steering components on the front end..still steering play. Gonna have to pull the sterring column and check the T25 bolt and intermediate shafts. Thanks for the great info and for pulling the keys eventually to get rid of that terrible dinging! Need some PB blaster on the rusty shaft to get it to slide.

Great video man! Straight to the point and details about the tools

Thank you sooooo much, man. I'm still going to do the intermediate shaft because im extra, but man, it's pretty much gome now. It was driving me nuts. Just redid the entire front end and still had play. The only thing left are those shafts you're the man for this.

Perfect, now i know what to do. Thanks Kurt, great video.

It's super scary pulling a trailer and getting wobbly

Thank you so much. I rarely comment on KZread videos. But this did the trick. I really appreciate it.

Dude. I have a 96 Tahoe. My steering wheel has a lot of play. I changed the steering shaft. The same one you're getting. But that screw you just showed might be my main reason. I actually have to do another tie rod job again. But man, thanks on that. I new there was a issue with the column.

Thanks for this! Replaced every single component up front on the truck and still had this problem. Took all of 2 minutes to get it nice and tight.

@brandonperez4847

3 жыл бұрын

So tightening that screw on the column worked? Did u turn it a little or until it wasn’t able to no more.

@austen2382

3 жыл бұрын

@@brandonperez4847 kind of just snugged it up till it was firm

@CurtARoll

3 жыл бұрын

Till it felt tight

I have same truck and same issues, very helpful video, thank you

I loved seeing someone fighting that task like I did ! Man a trying experience. Now since I replaced the cheap bearing and upper shaft it has a hard spot (binding spot ) when I steer ! I’m still slowly evaluating toward checking the lower shaft . Not much info concerning my continuing issue . Thanks for posting your video .

@romper4444

9 ай бұрын

If there's a stiff spot after it's likely they didn't shock the u joint shaft at the factory it was made in. After replacing a u joint u have to put the yoke on a vice or something solid and whack the other side of yoke to free up the bearing rollers in joint. They often bind after install. It kinda centers everything then moves freely.

Nice quick video thanks for the help bro!

My Silverado is doing almost exactly this. I might replace the shafts and tight up the T25 nuts. Also you can adjust the worm gear on top of the steering box. It's a t25 too. You loosen the 5/8 nut, turn the t25 til it's snug, back it off a quarter turn and tighten the 5/8 nut. Thank you though. This confirmed a few suspicions

Bro I got a month trying to find this clicking noise I F love ❤️ thanks a lot

Excellent video. Thank you, sir.

Thanks for sharing . Hopefully that'll take care of mine .

Great video !

Thanks for the vid!! Solved my problem!!!🤘🏻

MANE! Bout to tackle this as well on my Ram. Shid my cheap a$$ ain’t paying nobody to fix it. 😂😂😂Thanks for the vid famo

@CurtARoll

2 жыл бұрын

Lol I feel you

Thanks for the vid brother. I tighten up those 2 bolts up on the steering column and I still have some play. Gonna recheck that lower steering shaft hopefully that's it! Thinking about just going with a new gear box if this doesn't work

@CurtARoll

3 жыл бұрын

Right on, I found some of my new Auto zone parts to still have some play and had to take a few things back. I'm definitely going to order parts from the heavy duty suspension guys online opposed to local parts store.

great video thanks O and nice shoes

Thanks for the video! I've replaced literally everything I could think of steering-wise and just replaced the powering steering rack. My truck feels like a boat while driving and will jerk kinda hard when turning. It is aligned and drives straight but the steering wheel just goes left and then right and is never aligned, I'm gonna try tightening the T-25 down and hopefully, my problems will go away God willing.

Change the steering shaft bearing to, the green plastic bearing that atches to the stearing shaft it will also make for a smooth ride

Just did the torxs on the steering wheel, and the slop is gone. It only cost a complete (moog) steering rebuild. Including steering shafts and steering box. Thank you very much

Right on. I have a 1994 Z71 K1500.. I appreciate your info. Much Thanks

@CurtARoll

3 жыл бұрын

Glad I could help

@luckyl6042

3 жыл бұрын

im batttling a 99 suburban atm

Thank you for the DIY repair video, I have two Chevys awaiting shaft repairs.

thank u brother,,, great info..

I have the same problem, my shop claimed that they couldn't find the right shaft and that they gave the dealer my vin number and the dealer sent them the wrong part and that they couldn't get the right part for my truck, well within 10 minutes of looking on the autozone website I found the right upper and lower shaft and the steering wheel colum bearing. You should replace that bearing while your at it, they have made a new updated better version of it, it's the while plastic piece above when the upper shaft bolts in. I already forked out a bunch of money and replaced my steering gearbox and that helped quite a bit but I still have a good amount of play in my steering wheel and it's irritating, I'm going to be replacing my lower and upper shaft plus my steering colum bearing while I'm at it plus I'm going to put on a new Bilstein 5100 series stabilizer and hopefully that solves the problem.

Didn't do anything for mine, screws were tight already. So mine is probably in Pitman arm Joint or drag link joint to steering box, I don't have play in my tie bar or rod ends. Really hoping it's not the box itself. The upper Steering shaft u-joint u are going to replace doesn't appear to have play on mine either just by looking down the column and wiggling it. Was excited for an easy fix on this one grrrrr. What can ya expect for a truck with half a million on it lol

The top plastic shroud you removed from the steering wheel from factory has three bolts from the bottom side that I believeis t15 or t20

Thank you for your video I love my Chevy Silverado had this problem for a while getting ready to fix it

@luckyl6042

3 жыл бұрын

how did it work out

Amazing, I have had a sloppy wheel for over 7yrs now. Replaced everything and what would you know the T25 fixed it in 2 seconds. Thanks bro, bless you!

@CurtARoll

3 жыл бұрын

Thanks man, share this video in a forum or something for me! 💪

@adenseay7406

3 жыл бұрын

Did you replace gearbox too?

@lipripperveteran3720

3 жыл бұрын

@@adenseay7406 I didn’t replace the gear box, I replaced the pitman arm and tie rods.

@jordanlabre

3 жыл бұрын

What years does this work on?

@Monster33336

2 жыл бұрын

What is the cost you paid? I got a sloppy steering with play but nobody could find the source.

Warning! I did this and let the steering wheel turn. It broke the airbag connection. $300 part and a real pain to fix. Secure the steering wheel so it can't turn when you take the shaft out.. Leave the key out

@kimmadison5504

4 ай бұрын

Yes that clock spring ant no joke

Thank you!!

@CurtARoll

Жыл бұрын

You're welcome!

Gonna try this tomorrow. I've replaced everything. It got way better but still has play this is my last hope.. 2004 suburban

So tightening that screw on the column worked? Did u turn it a little or until it wasn’t able to no more.

It also worked for 07-13 Chevy Tahoe. I was told I needed a whole steering column from a shop smh….now I need to figure out why it shakes at around 50-70mph

@trevorbartunek2014

2 жыл бұрын

Alignment? Or tire rotation. I had that issue before it would wobble at 45mph just needed a Alignment.

That's all I got left to do is shafts.

Great video boss. Hey so i swap all my joins and rods every new like u spoke but my steering has still alot of play iam check that all those parts you mention. Well be replacing the new as i check. For a second i thought it was my gear box :( any ideas where to order my parts 2006 chevy silverado v8 5.3

Replace that leaky hydroboost 👍🏿

Yeah, I'm gonna be gettin into this job and the Worst part of the job that I'm Not looking forward to is contorting myself Under the dash..............

I'm having a hard time lining up the top cover of the steering wheel and I don't wanna break anything. Any tips or tricks to get it to line up right? I got ahead of myself when I first saw the T25 trick and didn't look at anythinf before I went crazy with it 😂

My steerings tight. Like it binds. Thinking it's U joints. How did yours feel? The ones you took out i mean.

Take the slack out of the steering box Wrench and Allen wrench first could be worn worm gears in the box

Great Video Sir! I was able to find the intermediate shaft, but what is the lower part called? I couldn't find it on Rock Auto?

@CurtARoll

2 жыл бұрын

I think lower steering shaft. It should be in video or just google Silverado steering linkage or parts

Where did you find this out?

Will this work on my 98 Silverado? Thanks.

What was it that plastic staff you tightened?

On an 08, I tried tightening them...but wheel still has a bit of play maybe screws need to be slightly longer??? Everything else is new, gearbox, 2 shafts, shaft bearing, 4 tierods, ball joints, UCA bushings, LCA bushings

@CurtARoll

2 жыл бұрын

My play seems to still be there after 1 week I had to replace the one of the parts I had just replaced. I'm going to order kryptonite parts next and pull all that autozone crap out

@mrmotofy

2 жыл бұрын

@@CurtARoll Yep autozone is usually cheap junk unless you're buying the name brand stuff. I went back in the steering wheel and checked screws again...1 I got another half a turn on. Apparently I either missed it or didn't tighten enough. Now the play is ALL gone...it's awesome, dropped the tire pressure to around 52psi and it rides pretty good compared to what it was. I made a new vid describing some of the common issues/fixes

Did mine didn't remove the boot

I did mine but they keep coming loose even tried locktite do you know what this is actually called because i cant find anything 😢

Anyone know if a 97 chevy has this?

Good info. I wonder if my 2014 1500 would have that same set up going down into the steering gearbox. Was your loose feeling in the wheel around the centered 12 o’clock position ??

@CurtARoll

3 жыл бұрын

yes it was.

Will this cause shaking at high speeds….I’ve had an alignment and tire balance done twice no change. My steering wheel is loose even when my Tahoe is off you can move it back n forth

@CurtARoll

2 жыл бұрын

Try wheel hubs

❤❤❤❤ SKIP KZread ADS GO TO THE END OF ANY VIDEO THEN RESTART ❤❤☻❤☻

@mrmotofy

2 жыл бұрын

Or use a browser with adblockers

GM discontinued the intermediate shaft for 1989 c1500 Silverado and I can't find aftermarket. Can anyone advise please.

@mrmotofy

2 жыл бұрын

Check another supplier there's another part number if I recall that works fine. Or google the part number.

Porque no lo traducen en español

You have a really nice neighborhood. What city is it if you don't mind me asking?

I have a 2017 silverado 1500 and the steering wheel is loose. It only has just over 47,000 miles so I'm not sure why it would be loose already.

@docker1689

Ай бұрын

Figure anything out with it? I have the Same truck

Was gonna watch was good video up until that door dinger was jumpin off

@onlyonered3242

3 жыл бұрын

He turned it off and apologized @ 6 min

wait, that's not an OBS Chevy! why am I watching this?

Take the key out.

Look guys all the sudden it just popped of when I was intending it to do so! I’m so smart

Please people don’t do what this guy is showing you to do! First if you have zero skills buy a manual for your car and if at any time you get confused and cannot do for your car as it says just bring it to a certified mechanic! This guy is literally wasting your time! He can pull it apart but he does not understand what he is doing ! Look and you can prove it also!

@gregbaldwin9661

2 жыл бұрын

Please elaborate or you are creating confusion for DIYers who need good information.

It also worked for 07-13 Chevy Tahoe. I was told I needed a whole steering column from a shop smh….now I need to figure out why it shakes at around 50-70mph

@d2nasty696

2 жыл бұрын

Tie rod ends could be it