FIX A TURNTABLE BELT DRIVE IN 2 MINS | Easy Tutorial

If you enjoyed the video, please like and subscribe. I was repairing the Optimus LAB - 1100 fully automatic turntable, but the process should be the same for any other turntable.

Пікірлер: 13

  • @blameobtorto
    @blameobtorto Жыл бұрын

    Thanks!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

  • @rigatr0n
    @rigatr0n8 ай бұрын

    Thanks dude, I had no idea how this went back on!

  • @jackrandom2786

    @jackrandom2786

    6 ай бұрын

    Glad it worked out!

  • @inggox09
    @inggox097 ай бұрын

    Tysm dude i was scared it was broken

  • @jackrandom2786

    @jackrandom2786

    6 ай бұрын

    Glad I could help!

  • @fivetenfinn6652
    @fivetenfinn66526 ай бұрын

    My old Fisher MT-6117 semi-auto is starting to make an intermittent scraping sound as the table rotates, not sure if something is stuck in between the table and body or something else? I'm going to investigate. I investigated it, saw there's a plastic piece that was broken at the bottom of the platter, this part is split, but I managed to glue the broken part and it doesn't scrape for now, but it's not a permanent repair. Probably need to 3D print this part.

  • @jackrandom2786

    @jackrandom2786

    6 ай бұрын

    Could also check eBay for your exact model and get it there if it's not too old. Best of luck man!

  • @richalderson6069
    @richalderson60692 жыл бұрын

    I bought one of these models today but it plays at slightly too fast a speed. Any advice on how to remedy this problem? Cheers.

  • @jackrandom2786

    @jackrandom2786

    2 жыл бұрын

    As you already probably know, there’s a speed button on the front. When it’s pushed down, it plays faster to play 45’s. If that’s not it, there’s a line out or phono out at the top of the turntable. You can access it if you take off the rubber mat and position one of the access holes at the top, you should see the switch. If that doesn’t work, unplug it and plug it back in (disconnect from receiver as well). If that doesn’t work, perhaps you could disconnect the belt from the belt drive system and reconnect it. If none of those work. Someone has probably had a similar or close experience and gave a solution on Reddit or Quora. If you still can’t find anything, I think as a last resort you could bring it to a turntable repairman.

  • @richalderson6069

    @richalderson6069

    2 жыл бұрын

    @@jackrandom2786 Thanks for your reply. I found what the problem is, there's a speed adjustment on the bottom of the unit that you put a screw driver in and turn left for slower and right for faster. Cheers.

  • @discoprescription

    @discoprescription

    23 күн бұрын

    thank you i fixed it speed adjustment saved me money i got a Jensen jta-325

  • @cristian-gabrielgaldamezbr3810
    @cristian-gabrielgaldamezbr38107 ай бұрын

    Thanks, you saved my christmas lol

  • @jackrandom2786

    @jackrandom2786

    6 ай бұрын

    Glad I could help!