OMG you have given me the confidence to use my dent puller. I will invest in the mini one I never knew you could get them that small. Finally I can use my own plastic mallet for the first time! Which is a great idea I would never of though of this. Especially in these economical times great video!!

Did pretty good. Got a new sideline now. I would have removed that term first but you got there. But I have been around it for along time my brother had a body shop until about 3yrs ago when he to decided to retire around 73 or 74. God bless you'll

Your video's are so informational and fun to watch. Keep up the great work.

Wow, they do work! I have to do my car too! A heat gun would have worked well. And alternate between heating and dry ice behind some foil. The hot and cold works well to pop out small dents. I would have take out the door panel and pushed that out with my hand or a rubber mallet. They also have rawhide mallets for jewelry that are gentle. Thanks for a great demo!

12:22 thank me later

@CobraChick

4 жыл бұрын

Appreciate 🙌

@motorbikemadness5773

4 жыл бұрын

Later: Thank You

@salimasgar2345

4 жыл бұрын

Ty

@rashadmajied8110

4 жыл бұрын

Pro_player441 thanks

@tink0801

4 жыл бұрын

You a goat

I am a grandmother who bought one of those orange pullers yesterday to try my hand at getting a large pushed in area out of my truck back bed panel. Had watched a few videos like this first, and was able to pull 50% out with the first pull. (I am not at all strong) Worked another 20 minutes and got most of the rest of it except an area that has a crease in it as in this case. The truck is a beater, so I am not going to worry about it, but I am happy with what it did and I certainly got my $4 worth.

@donnedewaynecoates6041

2 жыл бұрын

But you are a strong lady get it Granny Granny

@angiep5216

Жыл бұрын

I am a grandma too, and I am not sure if I should buy it, the dent is worse than this. The problem, when I go to get gasoline, men stop by and say, “ for $350 I fix your car right now. Sorry I don’t have cash. Don’t worry, for $250 I fix it now. Thank you but I don’t have cash now. The last man told me, for $100 I fix it, you can get the money from the amt machine, ….🤔🤔🤔 I said, give me your phone number and I can call you next time. 🤔🤔🤔😂😂😂😂😂 I know $100 is not much but I wasn’t being sure

I'll admit that was more funny than informational but I'm good with that!! Thanks!!

I have several dents on my out of shape body...this will work good! 🤠

Pour a couple of kettles of hot water on get panel very hot (metal expands) suction cup pull and put cold water on (metal contracts) dint should be history . I was doubtful when some one advised me to do it but it works a treat wooo

@toonybrain

4 жыл бұрын

John Fisher Makes perfect sense.

@twinx350

2 жыл бұрын

If you do that on a cold day it can ruin the clear coat on the surface.

@mjremy2605

Жыл бұрын

DENT, not DINT. Excellent advice! I need to do this.

@johnfisher516

Жыл бұрын

@@mjremy2605 dent / dint same meaning both correct grammer good luck with it

@mjremy2605

Жыл бұрын

@@johnfisher516 Yes, you are right! Its old English. I never knew. I learned something! Thank you. I usually check before I correct anyone, and this time I didn't, and it came back to bite me! Ha ha!

We purchased that same suction pad from Harbor Freight in the Bronx NY to address a pointless dent at rear driverside panel right near the bumper cover. It did a good job on the area furthess from the bumper cover, but we have the same issue with a crease that we now believe that a smaller suction pad will work. Thanks for your suggestion on releasing the pressure on the creases as well.

@missayawk

Жыл бұрын

That's where I bought mine.On Boston Rd.

Looks another better. Thanks for sharing.

LOL! I was waiting for the lick! Hilarious! 😁😉

Great job guys!

Some good ol' clean fun. Right on guys

That was awesome! Thank you!!

Love the videos! Great work x

grateful for you guys for making such a useful.video

well done! simultaneously pulling and hammering is the key

So damn funny. You two are having way too much fun.

Yall are great. Thanks for the video

This guy is great I can't believe I just found it now but I love your videos awesome work I learned so much from you from this short video appreciate you

Awesome job! I hope it works as well for me!!!

If you're gonna go from the outside, I like that you took the trim off. Good effort guys !

good video, looks like yall were havn fun to me and that to me is what makes a good video👍👍👍👍👍👍

Good job y’all!

Awesome absolutely loved it 👍🏻

Good job you guys that was fun to watch . Cheers

Try using a hair dryer set on Hot on the dent, when you're pulling. It really helps.

@miketin745

2 жыл бұрын

Is a heat gun better than that a suction cup ?

@Una2Cold

2 жыл бұрын

@@miketin745 you want to use both. Heat it up and suction pull it out

I used a toilet plunger to pull a dent on my '64 El Camino years ago. Worked fine, lol.

@Grant849

4 жыл бұрын

Probably depends on the size of the dent. I'm sure this helps more with the smaller dents

The quickest way would have been pulling the door panel and hitting it from the inside. The cold metal sure didn't help in removing the creases. Nice job having a lot of fun with a friend.

@hermonorossco7988

2 ай бұрын

I would rather try this before pulling everything out from the inside. I’m not sure I would get it back together properly and I’m not looking for more problems

You fellas gave me some Real Hope and i may get my door dent out with your help and a prayer!

@merskiii

3 жыл бұрын

U got it?

I value seeing people enjoying themselves while accomplishing something. By chance, have you both known each other since you were kids? Thanks for the video.

@gayealisir5661

2 жыл бұрын

This is the most wholesome commment I have seen in a while. Thank you.

@goaheadtagmeIknowyoumadbitch

Жыл бұрын

@@gayealisir5661 dude you're gaye

Thanks for testing this! I was in the parking lot of the grocery store and damn if the wind didn't push a shopping cart into the door of my van and dent the hell out of it. But I think I can get it out with this with a little perseverance and a measly $5.

@StoneyRidgeFarmer

3 жыл бұрын

I also used one of these kits: amzn.to/34yiZKM (affiliate link from Stoney Ridge Farmer) it's a Paintless dent and ding remover kit...it will take out small dents very nicely in case the big dent puller doesn't work

@miketin745

2 жыл бұрын

@@StoneyRidgeFarmer what do you think about the heat gun ?

@mjremy2605

Жыл бұрын

@@miketin745 It is a good idea but watch out for paint peeling if it gets too hot. Gently. Wagner $22 at Home Depot. I did my plastic bumper this way with no issues. Popped right out.

@mjremy2605

Жыл бұрын

@@StoneyRidgeFarmer $97 on Amazon with $10 tax in CA. Not worth it.

This was an exciting video to watch I just bought one of those dent ding removers🔥🔥🔥🔥🔥🔥

Always something to take from ur videos

Looks pretty good, great job.

Very entertaining video, guys.

Yeooo gawdd cha Ching!! Lol after the massage..

Thank you for sharing

Nice job guys!

Your entertainment working very nice, good job

Subscribed on this one video alone... good stuff

that was great guys!

The most fun I never wanted to have!! LOL!

This vlog is great!

you can use heat gun to remove the sticker decal and when pulling dent.Heat make metal soft and easy to manupulate.

Nice job getting the dent out guys

Now , that was awesome

I fixed my Subaru bumper with Hot water and pressure works a treat .Your dint is to close to a main beam it may work a little but it will not repair %100 .

LIFE SAVERS!!!

impressive man!!

Funny video guys 🏴󠁧󠁢󠁳󠁣󠁴󠁿🥃

Good job!!!! I’m getting one of those pullers!! LoL. You’re a cool guy to go out and have a couple of beers!

@JosephMbidi

2 ай бұрын

Ahahahahh

Awesome video.

Despite them not working on your trucks i would say those things work well enough My guess is you should heat the areas up with a heat gun and work some other angles and spots around the dents i kind of agree with your conclusion on purchasing several in order to work many areas at the same time on a side note ive replaced regulators on a older Chevy work Van and you needed. The super large pop rivet gun and special rivets i got from a freind who owns a repair shop and half of a Snap-On truck as he and his brother are certified mechanics and co owners

Thank you bud

Great Vid.

You have to hammer in the crease with body hammer. Release pressure

Epic job

You know back in the day we went to the hardware store and got a bunch of toilet plungers and used them! They still work!

@showgirlsaroundtheworldada4484

5 жыл бұрын

Sometimes

@markusray319

4 жыл бұрын

Why do you need a bunch?

harbor freight cups work great!

Harbor Freight and my inability to budget will lead to my financial demise. The tools are cheap, but love the place. Thanks for the fun video!!

That’s awesome

Good humor friend.

One of the funniest videos I have came across in a while. Btw that DIY was excellent. #Subcribed

Lol I love you guys You guys did good and it was entertaining but I love it

You guys are so funny 😂

Nice job boys ! I was considering doing an insurance claim and was gonna eat $500 deductible. Didn’t have to !!! Thanks !

This guy spends more time talking than doing the actual job.

Used one of them before. I poured hot water on dent and it worked

Thanks man

Good Job👌👌

We used to use good old plungers!

😂😂very fun actitud to fix

Nice work

you guys did great and enjoying watching you . you are funny though . good job finally ...Red Biber is happy i am sure . finally hard work worth .

Hey thanks for the video man I'm going to get out of try I got an old car I don't want to spend a lot of money in and I think that will be perfect thanks again for the video

Damn, for the money you can't beat those suction cups. Gunna go out and buy me a couple as well today.

@miketin745

2 жыл бұрын

How did it turn off ?

@OctaneStreet

2 жыл бұрын

@@miketin745 It actually worked, but for some dents the crown of the dent is in far too advanced or technical of a spot for the suction cups to work.

@miketin745

2 жыл бұрын

Did you use a heat gun ?

@OctaneStreet

2 жыл бұрын

@@miketin745 no

@miketin745

2 жыл бұрын

I really appreciate it I was trying to figure out should I buy a heat gun or suction cups

I so happened to have the same exact large orange suction cup to use

Bought my Chevy Colorado it's a 2004. And bought it for 600 couple months ago. And it's at 186k miles. But to the point I had to use one of these to pull a dent out of my cieling bc a tree had landed on it. It wasn't to bad but it was noticeable it pulled it out right

Good job i also bought my 01 Silverado new and it only has 104k miles on it

The moulding is holding the dent in. Pull the moulding off from right to left to release the dent.

A toilet plunger with a little soap works real good on dents, but if theres a crease its hard to get that out with just a plunger. Try using it on your truck.

The tree thing in the intro is great

I had a book somewhere on metal bumping it was a great read and informative another tip is to get to it as soon as it happens and its more likely to pop back the longer u wait the more memory the metal has. In my experience

@dazzio187

4 жыл бұрын

Is it any good on general car repairs and do you remember the name?

@ScrapFarm

4 жыл бұрын

@@dazzio187 it's on the dashboard of my work truck right now it's a paper back book.. I think it's called The Art of metal bumping.. I know it's red and black and white pictures

What a fun video lol

I would suggest taking the inside door panel off and pushing the dent out if it's frames in there with holes I suggest using a rubber mallet and a number 2 pencil and bang the eraser end to push it out

Tap down tools would work wonders for those crowns but not bad of an outcome using suction cups.

If you take the interior door panel off you could push on that with the palm of your hand and more than likely pop it right out.

You know what, I subscribe to your channel after you guys successfully pull the dent.. Lol

You need to include more outtakes like that in your videos

This is good video💪🏻🇫🇮🇺🇸

Since it is cold there it probably would have been a benefit to heat the metal with a propane torch, indirect heat??

Use a plastic mallet to tap the high spot while you pull on the low spot with suction cup

Good job

You guys are funny 😄 However, you said “quick”! Good job fellas, from over here in 🇬🇧

Cool and funny

Gotta love red beaver🤘

THANK'S