Cheers David. Here we are, 4 years down the road and you're still helping people. I appreciate the demonstration. It worked for me. Mine wasn't rusted but the grease had gunged up and that was enough to stop it working. Thanks again mate. 👍

you star ! I did exactly what you advised and bingo, perfect stapling and no jamming , cant thank you enough

I got a similar brad nailer a Husky brand that wont fire, i found out the spring was missing inside that creates a spring loaded feel when you open the top cover. I got it back and works like a charm now. Thanks for showing this video.

Thank you very helpful. Getter done son. From an American in NC !

Thanks Dave, i repaired my Lidl Parkside with your tutorial!

Great video, I usually put a few drops of oil into the gun where the air goes in. Never thought of where the action takes place at the front end.

@dmgladden

5 жыл бұрын

Yes thats what im doing as well it works for now

Omg!!! You helped me so much. I had a brand new gun thinking it’s faulty. I’ve only been putting the nails underneath the gun in the wrong place! 🤦🏽‍♀️The instructions are rubbish.

Thank you David. Great tutorial.

@dmgladden

4 жыл бұрын

your welcome mate glad you enjoyed it

Another great video David. I've been thinking of ordering a brad and staple nailer as your earlier video seen a few negative reviews on Amazon because of the blocking but if it's not to difficult to put right may take a chance.

@dmgladden

5 жыл бұрын

Yes its not Amazon it was Silverline and i would just say as a standard practice when you buy such tools strip them and make sure all is good before you start.

Thank you. You gave me courage to take mine apart. I just got it and it jammed, I pulled the staple and it broke off, now I can't use the gun.

@dmgladden

4 жыл бұрын

Yes thats all it takes a little courage afterall many of the tools i pull apart i do for the first time, anyway good luck and thanks for watching

Spot on thanks for sharing 👍👍👍👍👍

Happy New Year, Dave.

@dmgladden

5 жыл бұрын

Happy New Year Ian

Brand new stapler. Oiled well. Fired about 4 staples and it started getting stuck. I need to open the cartridge and push with screwdriver the plunger. Then I fire 1-2 and it's getting stuck again. At that rate I would be faster using a hammer. Now I see what might be the problem. They couldn't have made the critical parts from stainless steel? Can't be that much more expensive to make.

@ddimov2557

2 жыл бұрын

Some more information for the common good: Mine is a brand new Draper of almost identical construction to the one in the video. It had been staying in its blow molded case for more than a year before I needed to use it for the first time. As per my original comment it was jamming after every 1-2 staples. Opened it up. In the manual what I called plunger is defined as a "driver blade". This component has some rusty looking like coating. I'm pretty sure it's not rust - it does look like phosphating process or perhaps some electroplating to prevent rust. It was obvious where the coating was applied and where it wasn't. If it was rust these boundaries would not be so recognizable. Good idea but the manufacturer failed to account for dimensional change after treatment. After removing this coating with 800 grit sandpaper it's all nice and smooth now. I used low viscosity brake grease to pack the piston and seals - really slippery stuff. I hope I don't need to revisit it again in the future. I will get an inline lubricator (toolstation sell these for £3) Essentially the solution is the same - use sandpaper. Thanks for the video, it was very helpful

Excellent!!! Mine fires a brad every other one. Should i do what you've just done?

@dmgladden

5 жыл бұрын

I would, its good practice and it can only make things better

I use those mini inline oilers with my air tools (silverline) and have never had a problem.

@dmgladden

5 жыл бұрын

Niki send me a photo of it please i cant work out what it is i need i just got a water filter inline but i want some kind of oil drip as well

Nice Job Dave!!!

@dmgladden

5 жыл бұрын

Thanks Ken and happy new year mate

@dmgladden

5 жыл бұрын

Thanks Ken

Thanks

No offense but you should probably clean your guns yearly . This is what I do and it saves having to do this when your just moments away from a project...... happened to me before I started cleaning them just like my firearms

What is the swivel air outlet for what way do you turn it

and yes silver line tools are cheap but when it comes to air tools unless you are going to spend stupid money it does not matter unlike electric ones so cheap all the way it works and it just so happens i have the same problen with the same tool so i am sorted now

I got one of these that isn't working.. ughhh I'm gonna try it thanks to u

@dmgladden

4 жыл бұрын

Good luck, glad i have inspired you

hello david can you say what in line oiler and water trap you now use cheers

@dmgladden

5 жыл бұрын

Hi Terry, i don't as yet im still looking into the oil ideas so if you have any suggestions please feel free to share them

@terrysmith1310

5 жыл бұрын

@@dmgladden hello im looking at this eBay item number: 152662971809 and at £4.50 a good price they claim it will work with oil and water

@terrysmith1310

5 жыл бұрын

@@dmgladden im looking at this one for £3.39 item number eBay item number: 162625532232

@dmgladden

5 жыл бұрын

@@terrysmith1310 yes that's cheap but i already got a water filter from Amazon www.amazon.co.uk/gp/aw/d/B074CYSS7F?psc=1&ref=ppx_pop_mob_b_pd_title Its oil I'm needing

A good idea to disconnect the air line before loading/attempting to load staples or brads.

It sounds like you’ve got air leaking from somewhere in that shop. Most likely where your hose clicks into the coupler.

Always oil air tools before you use them Dave

@dmgladden

5 жыл бұрын

Hi Tartan, i did oil it but i guess this one was already too far gone, but thanks for the heads up, and thanks for watching

@garvielloken3929

5 жыл бұрын

@Tartan Mech do you take it apart and oil it or just put oil in where ther air goes in?

Super bro

@dmgladden

3 жыл бұрын

Thanks

What causes an air upholstery stapler to leak

@dmgladden

2 жыл бұрын

In my case it was cheap connectors but I'm sorted now you could try the same

ممكن حد يفهمني بالعربي كيف اصلح مسدش الخشب عندي كثير عطلانات وتعبني مااعرف شنو الي عاطل فيهم

@dmgladden

4 жыл бұрын

Yes that's true thanks

Best to grease the driver

I don't get it! At the end your gun did not shoot any staple to the wood and you said you have fixed it?

@dmgladden

2 жыл бұрын

It didn't need to be loaded as the fault was the action had jammed so I could test that without the need to waste wood

@dmgladden

2 жыл бұрын

Sorry I just checked the video and I do fire many staples into the wood try watching to the very end if you want to see the result, and then it's me saying "see I told you" it works lol

Sister and watching to figure out why this air is not putting out staples

It's rusty because you haven't fitted a water trap on your air line, compressed air produces moisture. Inside your shop where the air comes in you need a water trap filter/regular, also an inline oiler which drips oil into the airline very slowly to keep tools lubricated (not your tyre inflator) Also every couple of days you need to unscrew the drain plug under the air tank on the compressor to release the trapped water. Compressed air is extremely dangerous! And ultimately not cost effective.

@dmgladden

5 жыл бұрын

Its rusty because it was bought that way as i said in the video it was my first time using it when it locked up on me, but i will take the advice re water trap on the air line thanks

@drizler

4 жыл бұрын

Just grab a HF autodrain and put it on . Works like a charm.

@to6635

4 жыл бұрын

I live in Florida where it’s very humid most of the year - even with a good water trap corrosion is a constant battle.

@Ricks-way.

4 жыл бұрын

@@to6635 those type small home use compressors will always produce water. Where I work we have a Kaiser system, with water/oil separators and an air dryer, all the air in the pipes is bone dry, which is essential as it's used by the laser cutter and cnc punch, along with other air tools on shop floor, we have no corrosion issues at all. You can buy 'stand alone' dryers to use with smaller compressors.

@resolvingconcerns

Жыл бұрын

What is a good water separator model (Amazon link?) for a pancake compressor or a 10 gallon Cambell Hausfeld? Or... what about the "autodrain" NMM suggested below from Harbor Freight? How do they work?

Hitachi dba Metabo

Make sure your compressor is free of condensation. That could be where the rust in yours came from? Just saying. Cheers

A Great BIG Thank you to Neil from Yorkshire who was so determined to thank me despite not having Paypay he posted £10 directly to me. Also a big thanks to all the wonderful grateful people whom thank me through my , www.paypal.com/paypalme/Davidglad makes helping people worth while THANK YOU ALL

visuals were pretty good, but you seriously need to get a microphone. Your accent not withstanding, it was very hard to understand what you were saying. otherwise not bad, ol son.

Thank you I have an old mini paslode stapler 2118 - 29. Does not shoot staples it only makes a pup noise. I opened it to be sure it was well lubricated and cleaned out any dirt. A search on Google everywhere for a repair information but can't find nothing. please help.

@dmgladden

7 ай бұрын

Hi sorry without seeing it I can really diagnose it if I was you I would just keep playing around with it and hope something comes to light

???

@dmgladden

2 жыл бұрын

(****)

Hi

@howardgeorgetraut3923

Жыл бұрын

Mi staple gun does not return its blade it just shoots out but wen pulling trigger it does not go back in wat could b the problem it's a sumake air gun

if in return you want to buy me a drink or help support my channel click here www.solwayplumbers.co.uk/donate_37.html

your air tools will never work properly if yoy dont fix that leek so instead of fixing the tools do a vid on fixing the air leek just a thought