Once in our formula student team, an axle in our lathe broke. I used the milling machine to turn a new axle. It worked very well and the tool was very stable, giving great surface finish.

Vamos arriba hermano Messin excelente como siempre lo tuyo y te envío un fuerte Abrazo para ti y todos los hermanos Indoneses José desde Florida Uruguay ❤❤

@Yantoo

Ай бұрын

Terimakasih banyak saudaraku Uruguay ♥️

@josemacielzamudio1773

Ай бұрын

@@Yantoo ❤❤

@TomR61

22 күн бұрын

Do you know which country this is? I was thinking the Philippines. 😊

Anda memang ahlinya mungkin anda jugabisa bikin bor fris/mesin Milling sendiri 👍👍👍

Brother Yanto, you never fail to make my day. Watching you manipulate that lathe like it is an extension of your hands. The milling segments alone are worth their weight in gold. Many of us have a lathe but don't have a mill. You regularly demonstrate that milling on the lathe is far more than a concept. All is not perfect though.. In my mind when welding on the lathe I would do everything and anything possible to avoid connecting the ground electrode to my spindle. Seriously, there were other, more direct options than connecting it to the rear end of your spindle. I would do anything possible to avoid having welding currents passing through or getting near my spindle bearings. My other, knit-picky complaint is the segment at the cutoff wheel. You just finished machining a hydraulic fitting on the lathe. You then took it over to your abrasive cutoff wheel to separate the waste end. Problem is, the cut off section was the hydraulic fitting that you just machined. When the wheel cut through the waste the finished part fell to the concrete below. Yanto, come on buddy, there should have been a wood or other soft surface below that cutoff.......... Capice? I still love ya! Wakodahatchee Chris

Keren parah sih ini ilmu nya , pekerjaan yg seharusnya di kerjakan dengan mesin miling di garap abis di mesin bubut .

Lo que no te enseñaron en la escuela ,es que no hay que soldar arriba del torno !!

@user-bm1pw7vy8p

19 күн бұрын

Тем более что второй провод подсоединн не к детали а к станку,ток проходит через подшипники а это ОЧЕНЬ ПЛОХО.

A pleasure to watch your skills at work 👍🇬🇧

@Yantoo

Ай бұрын

Thanks brother ♥️

Nice ur work.👍👍 milling and drill work all include only lathe machine. Depending on ur lathe attachment iam also lathe cnc machine worker. I also some vedeose put some different machine 👍👍

لذت بخش هست کارهای شما🙌 انشاالله سلامت وپایدارباشید🤲🙏❤️❤️❤️🌹

@Yantoo

Ай бұрын

Terimakasih banyak saudaraku ♥️

Assisti até a solda no torno, isso acaba com os rolamentos e respingos no barramento.

I have never thought of doing this, thank you so much.....cheers from the US, Paul

@Yantoo

Ай бұрын

Thanks Paul 💝

Ничего необычного, токаный станок он в умелых руках весь стоночный парк заменяет.

How do you guys drill without spot drilling or center drilling first is beyond me. You're even doing it on a round piece. I would do the same even on a mill and a square piece, the drill wanders like crazy if I don't spot drill first.

@ypaulbrown

Ай бұрын

maybe they are using a split point bit to do the first hole, I will have to go back and look close...

@ypaulbrown

Ай бұрын

watched the second hole start, looks like a split point that has been resharpened, but they do not show for long....cheers from Florida, Paul

Kreative tanpa batas mantap

Teacher Yanto. 🤗 Best regards 🙋‍♂️🇩🇪

@Yantoo

Ай бұрын

😁😁🙏🙏

Kelasszzz abg nyaa 🫡

Excellent!!!

Teached = Taught

👍 nice work my friend!

Que pobreza, no tiene una mesa de trabajo ni una perforadora de mesa, tiene que trabajar en el suelo y sin zapatos

Nice video, thank you :)

Cool work thanks 👍

@Yantoo

Ай бұрын

♥️♥️🙏

Great job mate

@Yantoo

Ай бұрын

Thanks brother ♥️

Такой метод обдирки не сработает, если заготовка была из углеродистой стали и ее отрезали газовым резаком. Можно так сделать только тогда, когда эта сталь - пластилин

@user-oc2xi3jv8d

Ай бұрын

Сталь три!

You are amazing

@Yantoo

Ай бұрын

Thanks brother ♥️

There is a reason they don’t teach this in schools.. it’s a GREAT example of what not to do… 43 years in the trade and if you did these in my shop you wouldn’t last long…I’d fire you

You are right. I never learnt that in school.😂

Ini pekerjaan untuk konten Kenyaan dalam bengkel bisa.dikerjakan dg.mesin lain

Tutor struk up askruk bang

Why 4-jaw? This job can be done more simply and accurately with 3-jaw.

Keren bang tekniknya❤❤

@Yantoo

Ай бұрын

Maturnuwun pak Utomo

я считаю сильно заморочисто, только в редких случаях такое применять, если это колым который стоит того, а так нет смысла.

They taught us, not teached.

Братан був би ближче подарував би тобі два індикатора а так привіт з украіни мирного неба і божоі благодаті ти супер

❤

Hello bro how can i contact you?

Hello bro, how can i contact you?

Like you.what nationality.🤝

Не когда не работайте сваркой на токарном станке. Во первых, вы убьёте зеркало станины. А во вторых убьёте электро двигатель.

👍

ماشأ الله تبارك الله مبدع بي ابسط الامكانيات اهنيك واتمنى لك التوفيق

@Yantoo

Ай бұрын

Aamiin.. terimakasih saudaraku ♥️

Catched, caught Teached, taught Watched, latched, batched, hatched, patched, matched... OK Just having fun 😎😎

@Yantoo

Ай бұрын

Thanks brother ♥️

@rca7591a

Ай бұрын

@@Yantoo Syntax can be a quirky thing when applied between languages. Syntax is largely cultural, what is proper with one culture can seem odd when applied to the language of another. However, by listening with an attentive ear, meaning is generally clear. Catched and teached seems to me, should be perfectly acceptable. Example: "I was sure the locking mechanism was properly catched." I'd get points taken off in English class for that one. Be well my friend. 😎😎

@rca7591a

Ай бұрын

Machine Mechanic has some serious machinist's skills. 😎😎

Wow excelente tornero, una máquina para múltiples operaciones, un fuerte abrazo desde Perú y bendiciones de nuestro Señor.

@Yantoo

Ай бұрын

Terimakasih banyak saudaraku Peru ♥️

taught in school.

Apparently, neither is grammar.

Kaplinn aralarına lastik koy

Купите пацану отрезных резцов.

Bang saya mau nanya kenapa sebagian besar tukang bubut gak mau ngebubut benda yang terkait dengan senapan angin semisalnya saya mau ngebubut laras atau chamber di tukang bubut tapi gak mau kenapa ya bang🗿

@Yantoo

27 күн бұрын

Ribet mas, butuh ketelitian dan juga ada larangan bengkel bubut membuat senapan angin call 5,5 ke atas..

@PrasannanKumar-if9hb

2 күн бұрын

⁰😊😅​@@Yantoo

Terrofying, you can't Do that on the lathe.

車床的軸承再哀嚎了

Ada kontak wa mas?

Kok gak pake sarung tangan kulit bro, ngeri gram logamnya

@muztofue

2 күн бұрын

Justru kalau sedang pegang mesin bubut manual SOP nya tdk boleh pakai sarung tangan

Pahat bubutnya bisa dibelikah?

@Yantoo

Ай бұрын

Beli di online banyak bang

@user-ii7yj6ok8n

17 күн бұрын

Ззззззз8888888шш​@@Yantoo

Никогда не понимал 4 х кулачковые патроны, 3х кулачковыми можно сделать практически всё...!!!

甚麼東西有头沒尾