I wish more people would share their mistakes because I sure do make all of them. Thank you!

@lastingbuild1373

3 жыл бұрын

Mistakes, make us all better!

@jerbear7952

2 ай бұрын

I laughed fairly hard about gluing it to the wall. It's like he read my diary from the future.

Creators sharing our own mistakes with the viewers is one of the biggest things we can do to make woodworking more approachable for beginners wanting to get into this as a hobby or even a career. Keep up the good work!

@lastingbuild1373

5 жыл бұрын

Thanks a bunch! Your watching and commenting is much appreciated!

A great teacher not only shows on how to do things the correct way but also things to avoid and the reason to avoid them. Bravo.

I appreciate videos like this. Everybody overlooks simple things from time to time, and too many people are too ashamed to admit it. I can only imagine how many people have wanted to do this cleat system that were helped by your video. Nice work, good explanations, and great content!

@pnwgrown_360

2 жыл бұрын

I’m about to make my first cleat wall, this video did help my confidence a bit

For the past 3-4 weeks, my interest in French Cleats has grown. I have watched 10-12 videos I still did not fully understand how to fabricate them, or their full potential. You answered all my questions in 7.55 minutes. Your willingness to share your pitfalls was very helpful. Seeing someone perform the task allows me to feel like I'm performing my project with a co-worker that has done the job a time or two before. Thank you for sharing

@lastingbuild1373

3 жыл бұрын

Great! Glad to help!

I so appreciate folks who share their mistakes to save the rest of us the trouble of doing the same. Thanks.

@lastingbuild1373

4 жыл бұрын

👍

Getting ready to build some French cleats and I appreciate the tips.

Great video. editing, clarity, helpfulness. Thank you!!

This was so informative!!! I’d like to echo someone else’s comment that sharing mistakes is totally underrated. We all make them and it’s great to learn from each other.

Most useful French cleat video yet !!! You don’t know what you don’t know on a first build , so thank you for sparing me the headaches 🥲 I actually might do this project soon

It takes a secure and honest man to admit his mistakes. And don’t we all learn more from our mistakes? Excellent lesson. Experience is great, especially when it’s someone else’s experience. Thanks.

Good info. Always helpful when folks are willing to point out their mistakes so the rest of us can learn.

Takes a stand up person to point out their own mistakes....thanks for sharing yours so we can avoid wasting our time and material.

@lastingbuild1373

5 жыл бұрын

Thanks for watching!

Great info. Shave down that sharp point on the cleat parts so they don’t dead end each other. A lower board on the removable part solves two things, a place to put a wedge to keep it locked and keeps it spaced off the wall so it doesn’t SeeSaw.

Your honesty is true teaching...Thanks 🤗

I'm preparing to install a french cleat wall in my shop this weekend and found this video while looking for info, tips, instructions, etc. VERY helpful! I appreciate you sharing your lessons learned for the purpose of helping others keep from making the same oversights. As a result, I've watched several other of your videos; I admire and respect the fact your focus is on being helpful by sharing what you know, what you've done, what you've learned, etc without trying to be a comedian or appearing to be auditioning for your own show. That's why I subscribed. Keep up the good work and keep the videos coming.

@lastingbuild1373

4 жыл бұрын

Glad it helped!

Great video. This is the kind of information people need when they are novices - like me. Not just the technical parts, but the realization that even pros get to learn from mistakes and that's perfectly OK.

Saved me time. Ready to make my tool holders flawlessly. Thanks for taking the time.

@lastingbuild1373

5 жыл бұрын

Glad I can help! Thanks for watching!

Piece of advice, don't glue any spacers you add to your French cleat projects. You may want to remove them in the future and glue makes that awfully complicated.

Most of my projects have more than 5 mistakes. Thanks for sharing.

@lastingbuild1373

5 жыл бұрын

That’s true of everyone, I think. If I made a video, “36 mistakes” I’m sure no one would watch lol!😂

@PedramBastan

4 жыл бұрын

At least the most important ones were posted. These do seem like a "duh" (Homer Simpson) moment for us all until you really think about it.

@rollingthunder4599

4 жыл бұрын

You learn by doing

@natishamullis-brooks5715

3 жыл бұрын

My mistakes have taught me a heck of a lot more than any of my successes! If you learn from them, no harm! I just make a lot more fine saw dust to add to the pile! (Piles!) I get better all the time, though!

@MaBeSlovakia

2 жыл бұрын

There is a chinese saying: A wise man makes 7 mistakes each day. (We, ordinary men, make much more)

I live in an earthquake area so locking cleats is a must. I have the cleats on the wall close enough together that sliding a 3” x 3” board above the cleat on the box just barely touches the wall cleat above it. That way the box can not lift up without removing that 3x3 block. Locking it in place.

@1pcfred

4 жыл бұрын

If you're in an earthquake area you have to relocate to somewhere safe.

Love this video! Really great when someone share their mistakes to help us who isn't nearly as advanced. Thanks!

This is how we grow as a community. Thank you for the information.

Nice to share what you learned. And don't we all learn from our mistakes. When I built my french cleat wall I learned as I went too. I did start by putting plywood on the garage wall, and cut 8' lengths for the wall cleats, which after some figuring, spaced far enough apart horizontally up the wall: I didn't use every cleat to hang boxes from, but as you pointed out, many wall cleats become a support for the lower part of heavier tool boxes. I learned to make the boxes deep enough vertically to accomplish that. The nice part with the cleats, is you can move them around anyway you want, and as you get new tools. Initially I glued, tack nailed, and screwed the boxes. For most of them now I skip the glue- they hold up fine without i, it's less messy, and I may want to repurpose the box or change it later. Now it's just clamp, stick with the nail gun, and then drlll and screw. I also learned to make shelves on them high enough to hold boxes of nails, screws and other fasteners- my first shelves were slightly to short in height. So my sander box has the sandpaper, the finish nailer hangs vertically and has a few boxes of nails, the skill saw has a blade shelf, etc. I also have one for squares, levels, and punches, and a shelf for a micrometer and tape measures. Hanging off the edge of my edge-most box I have a holder for my ear protectors and eye goggles, as well as head lamp. My crosscut sled and fitting mitre box hang down low, since it is heavy: I drilled two large holes in the top end of the sled and it hangs very nicely on the wall too. When working on my bench, which has four locking wheels, I find I like rolling the bench out from the cleat wall where I store it, and then all my tools are handy right behind me. It makes work easy, and cleanup easier. Now I just have to buy that dustopper that Tom Huntly developed, and get my dust collecting up to snuff (no pun intended).;0) -Geo

@lastingbuild1373

5 жыл бұрын

Thanks for sharing your experience!

Re: locking cleats With our earthquakes in California I've thought about this. When I get around to installing a french cleat ... I'll drill a hole at the bottom of each hanger aligned with the bottom of the cleats. A friction fit dowel will go through to prevent the hanger from rising. To unlock just push the dowel forward so you can lift the hanger.

@kazykamakaze131

3 жыл бұрын

You mind I give a different option? When making the wall cleat, instead of 1 edge 45 degrees, make both top and bottom edges 45 degrees and then when making the cabinet cleat make the bottom a 45 degrees but a little longer spacing so that it allows you to mount the cabinet from any position, but what the idea is then in that extra space you add (same idea in industrial machines) a spacer that you can drive in from the side to take up the space you added at the bottom of the 2 opposing 45 degree edges. This would solve your issue and would look very clean and allow the ability to remove the cabinets again easily in the future. Hope this helps.

Thank you for your honesty especially helpful tips for newbies.

Much appreciated for the heads up. I’ll be using this video before I start.

Man, what a useful video. I can see myself making all of those mistakes simultaneously. Thanks for sharing.

@lastingbuild1373

5 жыл бұрын

Glad you like! Thanks for watching!

Planning on doing the same in my humble shed. Thanks for the tips, they really helped me out. Your a shining example of the good KZread can do.

@lastingbuild1373

5 жыл бұрын

Awesome! Thanks for watching and sharing!

Many thanks for sharing your experiences. I know that it takes a lot of effort to make a video and upload it so it's very kind of you to help others avoid pitfalls. I've just built a workshop and will make a cleat storage system. It's great when you can get things right first time and your information will make that more likely!

Great video, thanks for your humility and sharing your mistakes with the French cleat storage system. I learned a lot as I plan for a French cleat system.

Even 4 years later 😊 informative!

Thanks for sharing your knowledge and your mistakes!

Thank you for sharing these valuable experiences

I loved this and your shop has given me so many organizational ideas!!

Thanks for saving my a lot of time and aggravation! I’m planning on installing a cleat system in the next few weeks and this video has been helpful. I’m sure I would’ve had a lot of holders glued to the wall 🙂

@dirkdaddy2

4 жыл бұрын

Recommend making spacer blocks for ends so you can go up a wall and have them easily spaced evenly, then everything you want to mount to the wall just use cleats. Helps to have some of the 45 deg ripped wood laying about for new stuff you come up with. And use some big ol long heavy duty screws to get through drywall if you're hanging heavy of course. I've hung a heavy bike rack and workmate, etc no problems

Thanks for the tips! I am going to be adding french cleats to my shop in the garage. Very helpful.

@lastingbuild1373

5 жыл бұрын

Great! Glad you like!

Good video on common mistakes to avoid doing when using French cleats. I almost made the mistake myself of butting the support board tight to the cleat like you mentioned, so these are great points for those not familiar with French cleats.

Love the french cleat system! Good to see mistakes so we can avoid them.

@lastingbuild1373

5 жыл бұрын

Yes sir! Thanks for watching Joshua!

I like to learn something new every day. So keep them coming.

TY for the video brother helped me out a ton ...gettin rdy to french cleat a wall,earned a sub keep up the great job

@lastingbuild1373

5 жыл бұрын

I have a playlist on French cleats on my channel page and I still have a few videos left to post to finish off the series. Thanks for watching and subbing!

@christophercastor6666

2 жыл бұрын

Second your Sub, Greg.

Awesome, great to see-honesty of the mistakes which you can make ahead of time. Hopefully when building my system, I will save some frustration!

Thanks for your kindness clever man🙏🙏👍🏻

I’m just about to refurbish my workshop and am moving to French cleats. Very handy tips, thanks very much.

Gluing it to the wall... 😂 OH I would SO do that!!!!!!!!!!!! Thanks for the tip! Great video.

Repetition is the key to good learning ...Very good Video short to the point, informative and honest.

Great video! Thank you for sharing. If you’re still interested in locking cleats for your heavy stuff like the lumber shelf, it’s actually pretty easy and you could add it to what you already have. If you cut an “L” shaped piece of plywood (the bandsaw comes to mind for this) with the long part the width of the space between the bottom of the cleat and the spacer, you can just slide it in there after you place the cleat. The shorter part of the “L” gives you something to grab onto to get it back out when you want to rearrange. I know this video is almost 2 years old, but the info is still good and I appreciate it as I’m looking to expand my French Cleat system. Thank you!

Such a great idea to highlight the mistakes. Oh man, do I wish more people did this. Although you tend to remember better when you have to redo something.

@lastingbuild1373

5 жыл бұрын

Thanks for watching and commenting!

I admire the effort & honesty. Well done. 10+ stars.

@lastingbuild1373

3 жыл бұрын

Thank you!

Nice explaination of do's and dont's of a French Cleat system

this was helpful...as i'm looking to build my first tool wall soon. thank you!

#2, 3 & 4 are the ones that got me last year when I built. Gonna redo now,.. thx!

Won't be long before I start my tool wall. Thanks for the great points there. I tend to get ahead of myself so I could see me glowing them to the wall. Thanks again 👍

@lastingbuild1373

5 жыл бұрын

Sure thing!

Thanks for the excellent video on the French cleats System. This is an excellent tutorial: especially as you've made the example wood working to show us the different problems! 👍🙏

@lastingbuild1373

3 жыл бұрын

Glad it was helpful!

Thanks for the tips! I've finally decided on a layout for my very small shop and plan on using French cleats on a wall or two.

@lastingbuild1373

4 жыл бұрын

You won’t regret it!

This is great advice. I want to do this in my new tool shed. Thanks for sharing your knowledge and talent.

@lastingbuild1373

4 жыл бұрын

Thanks for watching!!!

Thanks so much for this video! I'm just starting out with wood working and making my own work shop. This will help me out so much...i can't wait to start!

@lastingbuild1373

4 жыл бұрын

Rebecca Cardy glad it helps!

I appreciate your honesty by sharing your mistakes. You have a new sub.

@lastingbuild1373

5 жыл бұрын

Thanks for watching and welcome to my channel!

I appreciate your video. I’m about to make mine and this is helpful!

Very good advice, glad I found this before I start making mine. many thanks

@lastingbuild1373

5 жыл бұрын

Glad you like! Thanks!

Learned a lot. Thanks, brother!

@lastingbuild1373

3 жыл бұрын

Glad it was helpful!

Thanks for the advice. I saw a locking method on You Tube where they slid a second spacer between the bottom spacer and the underside of the wall cleat. It works perfectly. I think it was called the “key” to locking tool cleats.

Thanks for sharing your experience and insight!

@lastingbuild1373

5 жыл бұрын

Absolutely! Thank you for watching!

Thanks for the information. I'm planning a major overhaul of my workshop/garage and plan on using your information. Great video and very well done.

@lastingbuild1373

5 жыл бұрын

Your welcome! Thanks for watching!

Really nice job-good presentation-concise, informative, and especially; using practical examples of the point you are making!

@lastingbuild1373

4 жыл бұрын

Thanks

Thank you for that video. I feel confident that I would’ve made at least four of those mistakes!

Usually I have to learn from my own mistakes. Thanks for letting us learn from yours. Subscribing

@lastingbuild1373

5 жыл бұрын

One reason I started the channel was to learn from each other.

Looks great. Moving into a new house and half the basement is unfinished. Will def put that system up!

@lastingbuild1373

5 жыл бұрын

👍thanks for watching!

Thank you for the tips. I will avoid this while building mine.

I also use a lot of french cleats. I have made a few of these mistakes (How could I forget the spacers?!?!?!). I am trying to get as much out of my french cleats as possible. Thanks for sharing.

@lastingbuild1373

5 жыл бұрын

Yes sir! Thanks for watching!

Lots of good info here for those who are new to this. I used the cleat system in my house back in the '70s both in the house and workshop. It's a good easy sytem and very flexible in its' uses.

@lastingbuild1373

5 жыл бұрын

Thanks for watching and commenting!

Thanks for Watching! If you like French Cleats, check out my new sharpening station 👉 🔴 kzread.info/dash/bejne/maqgmNuootKTfc4.html

@lastingbuild1373

4 жыл бұрын

You also might like the circular saw cabinet with hidden blade storage 👉👉 🔴 kzread.info/dash/bejne/anyouLeoc7moYdY.html

Found me a shop/ shed being delivered next week. Looking forward to using the system

@lastingbuild1373

5 жыл бұрын

Awesome David! Be sure to share some pictures with us!

Learn lots, thank you!

@lastingbuild1373

4 жыл бұрын

Glad it was helpful!

Good advice, thanks!

Great video! Thank you.

I spaced two of my cleats where both the top and bottom boards were cleats for a, particularly heave cabinet. It worked really well. I have loaded the cabinet heavy and it has not budged an inch in 10 years.

Lesson learnt! Thanks a lot!!

@lastingbuild1373

3 жыл бұрын

You are welcome!

Good advice, I am wanting to make a French cleat system for my little shop

What a beautiful shop! I’m jealous😂

@lastingbuild1373

4 жыл бұрын

Thank you very much!

the best design for a "locking cleat" that I've seen is basically leaving a 1 inch space beneath, and then sliding in a locking "pin", that's a simple piece of 3/4, about an inch wide, and about an inch longer than the thing is wide, so you can take a hammer to knock it out when it's time to move it.

@OregonDARRYL

2 жыл бұрын

Or drill a hole and use a dowel to slide directly under the wall cleat.

Excellent information

@lastingbuild1373

4 жыл бұрын

Thanks!

very helpful and subscribed to your channel.thanks

Enjoyed the video. Cheers from Tasmania

Thanks for this video!!! Very informative.

Thanks for the heads up

Subscribed. I like this kind of video a lot. Thank you, I found this very useful. I’m about to make a french cleat system in my small work area.

Good job, thanks!

Great information here, thanks buddy

@lastingbuild1373

3 жыл бұрын

Glad its helpful! Thanks for watching and leaving a comment!

So helpful, THANK You!

@lastingbuild1373

4 жыл бұрын

Great!

Fantastic, thank you

Great information mate thankyou 😉

Thank you, helped me a lot for reconsidering my plans. I have a old shed, the wall is not even because there are planks on it. Maybe this system will work or I need to mount a wooden panel on it.

Genuine mistakes thanks for sharing 👍👍

Great tips.

Thanks for the tips

Great info thanks so much

Great stuff man!

@lastingbuild1373

3 жыл бұрын

Thanks! Glad you like!

Another thing I see people mention, is to cut a couple of millimeters off of the bottom of the tool-cleat. As dust collects between the wall cleats and the wall, that might prevent the tool-cleat to fall down nicely into that space. Cutting away just a bit of material solves this.

Very simple stuff, but easy enough to get wrong. Excellent video, just subscribed too.

@lastingbuild1373

5 жыл бұрын

Thanks for watching and welcome to my channel!