Agree on the comments here. Although great that the bike can convert, it’s a major design floor that the jump in height of child required from no pedals to pedals is too great. So when the child is ready to convert (around 3 years old), the switched version of the bike is sized for a 4 or 5 year old. A shorter seat post is available that apparently remedies this, but you shouldn’t have to buy extra parts to fix a fundamental design floor in the bike’s unique selling point.

Awesome!

What size are the two silver bolts that go into the pedal post? They were missing out my kit.

@littlebigbikes1300

2 ай бұрын

Hi Duncan, they are a standard size M6 bolt and need a minimum thread length of 40mm. Please reach out to us on our email or whatsapp and we can get a set to you if they were missing from your kit.

Ah lads can we have a detailed video on step 1 , everybody complaining on how bad the instructions are on this video.. I’m struggling big time , brutal video

@littlebigbikes1300

2 жыл бұрын

Hi Richard, we're re-doing the website and videos at the moment and hope to have it updated soon. You can see how to loosen the cable here which will make it easier to release the cable from the cradle. kzread.info/dash/bejne/pmZ1w7OnqdWZkpc.html Otherwise please send me a video of your bike on whatsapp www.littlebigbikes.com/contact/ and I can assist further.

I've pulled the rear wheel back to out tension in the chain. But now the rear brake pads hit the tire instead of the tire's rim because the rim isn't flush into the slot. If i put the rim flush into the slot, then the chain is too loose. Any advice? Thanks.

@littlebigbikes1300

10 күн бұрын

Hi Martin, if the pads are touching the tyre, you can slide them up the caliper using the 5mm nut on the back of each pad. You can see how to do this here. kzread.info/dash/bejne/fGiawdxwda7Rlrg.html

@MartinKBrown1

10 күн бұрын

@@littlebigbikes1300 this helped. Thanks!

@littlebigbikes1300

10 күн бұрын

@@MartinKBrown1 excellent, glad to hear that

Apakah cocok buat push bike merk lain kak?

Step 1 seems hard. I can’t seem to get the brake noodle out. Any advice?

@littlebigbikes1300

3 жыл бұрын

If you loosen the brake cable using the silver barrel adjustor at the brake lever. First rotate the larger locknut anticlockwise, then turn the smaller inner barrel clockwise. This will loosen the cable and allow the noodle to be freed. Once you have done the conversion, turn both adjustors back into their original position. Hope that helps but if not please send an email via our contact page.

@josephdougherty3960

3 жыл бұрын

@@littlebigbikes1300 The first step is so difficult. Can you please post a video of loosening the brake cable. It's not working for me.

@chrismorris86

3 жыл бұрын

Agreed. Step 1 is nowhere near as easy as this video suggests. Useless!

@Blushiez123

3 жыл бұрын

Agreed this part is super difficult!

@Blushiez123

3 жыл бұрын

@@josephdougherty3960 did you end up figuring it out?

Can you put the link...where to buy that pedal kit?

@littlebigbikes1300

2 жыл бұрын

You can see a link to the pedals here www.littlebigbikes.com/shop/littlebig-pedal-crank-attachment/

@kuridasd.i.y3316

2 жыл бұрын

@@littlebigbikes1300 tnx

Hi! There’s a problem because you can’t adjust the bar of the seat down enough. It would have been great to have a second shorter bar or a telescopic system with the pedals bar. Now I have to cut the bar. This bike is not suitable for al ages...

@FilmProz

2 жыл бұрын

You can buy a shorter 15cm bar from their website

@BrentDaughertyMe

2 жыл бұрын

Same. And too late to order another shorter post for this weekend.

I am still struggling with step 1. It's difficult even after loosening the barrel.

@littlebigbikes1300

3 жыл бұрын

Did you release the brake cable tension as shown in the link in the video description? This should provide enough cable slack to open the noodle quick release.

@segunpalmer1629

3 жыл бұрын

I have tried that but I will give it a go again.

@segunpalmer1629

3 жыл бұрын

@@littlebigbikes1300 I am still struggling with this.

@littlebigbikes1300

3 жыл бұрын

​@@segunpalmer1629 If you make sure the cables are not twisted around one another. The rear brake cable should come out of the left brake lever and directly into the hole in the frame. If they are twisted, remove the handlebars (like during the initial assembly), unravel the cables then re-fit the bars. Can you send me a photo of the brake lever adjustor to support@littlebigbikes.com. You can also whatsapp photos via the button on the home page.

Hi! I can’t go down enough with the seat bar. I would have been great to have a second smaller bar or a telescopic System with the pedals bar. Now I have to cut the bar. This bike is not suitable for all ages...

@littlebigbikes1300

3 жыл бұрын

Hi There, many kids will have grown into the taller saddle height before being ready to progress to pedals. However if your little one is ready to pedal but still too small, you can purchase a short seatpost from our spare parts page. www.littlebigbikes.com/shop/spare-parts-for-littlebig-bike/ This allows the saddle to be lowered to 47cm while in pedal mode.

Please revise your video to troubleshoot Step 1. This video was not made with the average parent in mind.

@littlebigbikes1300

3 жыл бұрын

If the brake cable is too tight to open the quick release, the cable can be loosened as described here kzread.info/dash/bejne/ioJqldRwe9Cpdqw.html

Add commentary for goodness sake. Step 1 is a joke