Easy solution to the screw points sticking through the bulkhead. Use small wooden backing blocks to drive the screws into once they pass through the hull. This not only burrows the screw points it provides a much stronger fastening point as it spreads the stress over a larger section of hull material. Of course this technique can only be used on sections of hull that can be accessed for placement of the wood backing block.

@JesterBushcraft

3 жыл бұрын

Great feedback, thank you so much, really appreciate it...

Drill in reverse and apply downward pressure on plastics. Doesn’t bite for those that fear cracking delicate parts. If delicate or rigid hard plastics, drill through masking tape. Nice video, thank you.

@JesterBushcraft

5 ай бұрын

Great feedback and a very useful tip, thank you. Your comments are much appreciated 👍

Thank you Sr. I didn't know how to install my trolley system with this type of well nuts. It came without instruction👍

@JesterBushcraft

4 жыл бұрын

More than welcome Fredy, glad it helped...

Interesting and I've always used the metal Rivetnuts and never had a problem with them turning or cracking the nylon.

@JesterBushcraft

5 жыл бұрын

Specialized 29er Yes, they probably would of been fine, just fancied trying them out...thanks for your comment...

Great informative video. Well done and thanks for the knowledge.

@JesterBushcraft

4 жыл бұрын

FROLIK ALLDAY you’re very welcome, thank you for your comment...

Two holes turn into 6 holes brilliant mate !

where you get thise well nuts I bought some from ebay and are pos the rubber it's so hard the bronze bushings just slip cuss can't squeeze the rubber part

which model is best for kayaking. m4 m5 or m6?

Hello whats the size of well nuts please ?

Paddles float, why do we need a leash? 🤔

@JesterBushcraft

4 жыл бұрын

FattyMateo depends what type of water your paddling on, I agree on a canal a bit pointless, but in faster moving water ???

@johnstarkie9948

4 жыл бұрын

They float away. DAMHIKT

Jeeez..Get to the point man!

Might want to do a quick search on how well nuts are actually installed that's not correct sir

@JesterBushcraft

5 жыл бұрын

Im sorry, I dont see how I have installed them incorrectly. Maybe you can enlighten me...

@mickydavies

4 жыл бұрын

yes- i would also like to know

@ch33kz

4 жыл бұрын

I didn't see anything wrong with the installation process either. Since finding out about well nuts I've seen numerous installation videos and they're all done exactly like this video. Great video by the way 👍.

@Nozoki

4 жыл бұрын

You gonna tell us how you do it? This seems correct to me.

@ashtonians

2 жыл бұрын

I install them this way when I cannot access the inside of the kayak. When I can access the inside, I drill a much smaller hole that is approximately the diameter of the screw, then wind the well nut on from the inside. This seems to be much more secure, not sure whether it makes a less watertight seal though. Does anyone else do it this way?

you can just as easily put on some tape, foam, heat shrink, sipping straw, silicon, cigarette filter or file the tip of the screw dull, you britts really love making a fuss over nothing when a solution is right in front of ya

@Pavement-Prophets

5 жыл бұрын

Nope! We just like to do the job properly and not bodge it. You’ve obviously not heard the saying “worse things happen at sea”!

@PapaSmurfx93

4 жыл бұрын

Lmao