Poor Man's Kayak Modifications
Тәжірибелік нұсқаулар және стиль
Cheap Menards kayak fishing modifications.
This video was put together as a inexpensive way to get your sit in kayak water ready for fishing. I show you how to install heavy duty handles, an inexpensive anchor trolley system, flush mount rod holders and rod leashes.
Keep in mind this is a sit in kayak, the open cockpit will allow water to get in. That being said, I do not use silicone on my drilled holes. What I do is use a rubber washer that fits the stainless steel screw nice and snug and then a stainless washer slightly over sized to the rubber washer to create a water tight seal. You will get more water through the cockpit opening then any hole on this kayak if any at all. These are inexpensive modifications to get on the water. At any time you can take these ideas and upgrade to better quality material and maybe even build on these ideas and make them better, it’s your yak. Keep in mind that any cuts and or holes you make a very hard to repair so measure tice cut once. Some of these mods are necessary and some may not be for your style of fishing. Be sure to check out my playlist of other kayak mods that may be helpful.
• Kayak Mods and How-to ...
www.austinkayak.com
This was the place that had the cheapest deck eyes.
Deck eyes product ID# 223
Nylon pad eye
www.academy.com
This is where we got the rest of the stuff.
Flush mount rod holders #FMH
handle kit #HAND
Anchor cleat #ACRT
24" coiled paddle leash #CPL24
The stainless hardware and rubber washers for the deck eyes where from Ace hardware.
For the deck eyes you'll need:
screws and lock nuts
rubber washers with a snug fit
oversized stainless washers
quantities for the amount of deck eyes you will be using
For the anchor trolley system you'll need:
Para cord 50ft
2 stainless rings 2 inch but no less the 1 1/2 inch
And electrical tape
Rod leashes you'll need either old phone cord or new:
10ft or more phone cord
Small zip ties 6 for each rod leash
2 carabiners big enough to attach to your fishing rod handles
2 carabiners to attach to the deck eyes on the rod holders
And a few extra carabiners for miscellaneous leashes for other tackle or things you want attach to the yak.
You will need a anchor rope and for a anchor we use a 10lb workout weight, or a stakeout pole.
Grainger sells fiberglass rod stock I got 10ft that I cut to 8ft 3/4 diameter is best.
m.grainger.com/mobile/search/f...
If you enjoy these videos please like, share and also don’t forget subscribe to this channel so you can get the latest tips, tricks, vlogs and fishing fun. Thank You.
If you like the Fish On! logo and would like to purchase Fish On! merchandise please use this link flycrazyflywear.com/
Video tools:
Gopro Hero4 Silver
Gopro Hero4 Session gopro.com/
Editing software:
CyberLink PowerDirector 11 www.cyberlink.com/
Bass Pro Shops www.basspro.com/
Boat: 2013 Crestliner 1650 Fish Hawk with a Mercury 60hp 4cycle outboard
Crestliner Boats www.crestliner.com/
Kayak: 2012 Viper 10.4
Viper viper-kayaks.com/
www.academy.com
This is where we got the rest of the stuff.
Flush mount rod holders #FMH
handle kit #HAND
Anchor cleat #ACRT
24" coiled paddle leash #CPL24
The stainless hardware and rubber washers for the deck eyes where from Ace hardware.
For the deck eyes you'll need:
screws and lock nuts
rubber washers with a snug fit
oversized stainless washers
quantities for the amount of deck eyes you will be using
For the anchor trolley system you'll need:
Para cord 50ft
2 stainless rings 2 inch but no less the 1 1/2 inch
And electrical tape
Rod leashes you'll need either old phone cord or new:
10ft or more phone cord
Small zip ties 6 for each rod leash
2 carabiners big enough to attach to your fishing rod handles
2 carabiners to attach to the deck eyes on the rod holders
And a few extra carabiners for miscellaneous leashes for other tackle or things you want attach to the yak.
You will need a anchor rope and for a anchor we use a 10lb workout weight, or a stakeout pole.
Grainger sells fiberglass rod stock I got 10ft that I cut to 8ft 3/4 diameter is best.
m.grainger.com/mobile/search/f...
Follow me at:
Bass Hole Facebook: profile.php?...
Bass Hole FB Page: / bassholefishon
Fish On! Facebook Groups: / fishonil
BassHoleFishOn! Instagram: / bassholefishon
Twitter BassHoleFishOn: / bassholefishon
Bass Hole G+: plus.google.com/+BassHole-Fis...
Fish On! Google Community: plus.google.com/communities/1...
Пікірлер: 667
Great video. I applaud the fact that you use nuts and bolts and nut just screws. This is more secure. Tip: Use heat shrink to cover your paracord knots, instead of tape.
@bsfishing7073
2 жыл бұрын
It might be better to super glue the knots and so no more worrying about it failings
The rod leash idea is brilliant. I am gonna upgrade my rod holders with them. Good thing about cheap kayaks is that they are so easily upgraded to what you want and it can be done cheaply.
@FishingPOV
3 жыл бұрын
Yep, thanks for watching
Thank you. just got done putting my rod holders on my kayak and the template was perfect. thank you for the advice!
Just bought my first fishing kayak. Pelican mustang 100x. Its more of a recreational kayak with a couple rod holders but I'll be working on just about all these mods immediately. Thanks for the vid!
@FishingPOV
4 жыл бұрын
Michael DeNapoli good luck and thanks for watching
Nice! I'm all for budget..not a crazy everyday fisher here so this is PERFECT!
@FishingPOV
4 жыл бұрын
Roger Diotte thanks for watching and good luck.
What a great use for those old phone cords! Nice. I like those rod holders.
@FishingPOV
6 жыл бұрын
ByGraceIGo thanks you they work out well.
Loved the video, it answers several question I have had about modifying my kayak.
Just goes to show that we do not have to spend a whole load of ££ to get what we want . Great ideas you've shown us . Many thanks . Sean uk
@FishingPOV
4 жыл бұрын
the mad yakers Sean / Rick Yep I totally agree that was the whole point of the video good luck out there thanks for watching
few years old but never outdated, nice work, and there are always improvements
@FishingPOV
2 жыл бұрын
Thank you and thanks for watching
thanks guys.. you just gave couple more ideals for my yak..great instructional video.. cheers boys
@FishingPOV
7 жыл бұрын
trout stalker thank you glad to help
Bro, you have NO IDEA how much I needed to see this video!!! I'm making the swap from whitewater and surf kayaking to fishing from a kayak and this has been the best video for conversation ideas that I've seen! Thank You so much and keep up the excellent content! I'll be Rip'n Lips from a kayak in no time!
@FishingPOV
3 жыл бұрын
Thank for watching good luck with your mods and fishing.
@rvsbladesnthangs
3 жыл бұрын
@@FishingPOV dang man, you have a comment from Yak Motley on here! Very nice!
Cool video man!
Great video. Thanks so much for the demos and ideas for fishing addition. Especially like the anchor trolley system.
@FishingPOV
4 жыл бұрын
David Michael You are welcome, good luck out there and thanks for watching.
Keep in mind zip ties break down in the sunlight, I would recommend replacing any ziptie exposed to sunlight at least once per year. Somebody already mentioned backing plates, another alternative is LARGE fender washers, available at hardware stores or big box lumberyard/home improvement stores.
@J.Ogden954
2 жыл бұрын
Black zip ties are uv resistant
Was planning on getting an anchor for my kayak. Just what I needed. Thanks!
@FishingPOV
3 жыл бұрын
You’re welcome and thanks for watching good luck out there.
Nice ! Shows what could be done with a cheaper kayak - I've been thinking along the same lines - thanks for the video, very useful.
@FishingPOV
5 жыл бұрын
Maaifoedie De La Rey thanks for watching hope this helps get the ideas flowing.
Great video! Thumbs up very in depth!
My first time Kayaking and this Kayak held strong. kzread.infoUgkx4k5UrhC3v_Y4hIEaXLGvHcN5a5aBmZNB The water got pretty rough as a speed boat zipped by me, and the Kayak withstood it (I expected to be capsized). The Ores are very easy to put together, the pump worked beautifully. the seats are a bit hard to sit in after a while (I recommend sitting on the floor). after reading the reviews I was very scared it'd get a hole in it, the material is very strong and durable. The Air valve may need a small Phillips head screwdriver to adjust, other than that, it's well worth the money!(update)I've gone Kayaking in 3 Lakes and 2 rivers totaling about 40 miles. the kayak had two holes and they patched easily and no other problems can't wait for kayaking season this year!
@FishingPOV
9 ай бұрын
Good luck and thanks for the comment and watching.
Great video. Short and sweet while still showing installation and uses.
@FishingPOV
7 жыл бұрын
SlyDz420 thank you that's what I was going for
Excellent work! You inspired me to make some upgrades to my tandem kayak. Thanks!
@FishingPOV
3 жыл бұрын
Thank you, and thank for watching good luck.
good stuff - thanks for sharing those inexpensive and very functional tips
Awesome ideas and great attention to detail. thanks for loading this video!
You really did a great job on that Kayak.I know this is an old video but I still did enjoy it a lot.Thanks for posting this video.
@FishingPOV
2 жыл бұрын
Thanks for watching and good luck there’s also a few more videos with a similar kayak illustrating each individual thing I done separately.
Thank you for this! I'm thinking about grabbing one of these (there are like 4 left in the entire greater Chicagoland area) and want to make it more of a fishing yak.
Nice, clear and concise. Love the trolley system
@Wildirishmanbiker
8 жыл бұрын
No problem. Looks great
Very helpful video. I'd like to see the trolley system in action!
that slow month wrench action was epic maaaannn! haha
@FishingPOV
7 жыл бұрын
Connor Pollock LOL I should win A Oscar for that
@killintime8431
3 жыл бұрын
I’m really stoned
Great clear vid... You solved one of my problems as I have a converted sit on top Kayak that is 13.5 ft and the anchor pulley cord sages or rides up on top .. your idea to have two that meet in the middle is sweet... will be modifying my boat asap to that .. Thanks
I have a pretty similar kayak to this, but came with the pole holders. It only ways 40 lbs and I can carry through the woods to my favorite spot. Liked and subscribed! Ill have to try some of these ideas with mine and keep modding!
@FishingPOV
4 жыл бұрын
JB Outdoors yeah this one is light as well, I subbed, good luck with the mods and thanks for watching.
@JBOutdoors
4 жыл бұрын
Thanks for your support! I’ll make a video on mine soon!
Just found my next project for my kayak. That anchor trolly system looks so easy that I cant help but install one myself
@FishingPOV
4 жыл бұрын
Bryan Ovidio Good luck thanks for watching
Thanks for the ideas and the clear instructions.
@FishingPOV
6 жыл бұрын
Maurice Smith-Ziegler thank you for watching
I came across this as I was looking for some mod ideas to make our little dolphins a little more "fun", versatile, lake machines...as the broke mom, I found this quite sensible to do to save us from wanting something else that wont fit on my Aveo roof. Also appreciate the use of washers/rubber gaskets as the marine silicone is not budget friendly. lovin it, thanks for posting and giving me some confidence to drill into a perfectly good boat skin...eek!...lol. I got us those little dock rods instead of long rods because they fit inside the rig for car travel. (no large fish here)Mounted them with velcro tape... and put two mesh zippered school supply bags for small items on the inside (also with velcro tape), one on each side these are great for keys, radio/cell phone in a wet case, gum, sun lotion-another.. idea for you) all I need is a cup holder now bahaha...happy kayaking!
@FishingPOV
2 жыл бұрын
That’s awesome glad the video helped build some confidence and gave you some ideas. From personal experience some of these cheaper kayaks are just as good as the expensive kayaks, they get you on the water to have a little fun maybe you can catch some fish. Good luck with your modification ideas. And thanks for watching.
Great little stable yak. I have one as a loaner. Nice improvements.
Simple tools and go-for-it-attitude. I'm impress bro
@FishingPOV
5 жыл бұрын
Simply Rise thanks it doesn’t have to be complicated however folks can take this tutorial and use it as examples for what they want to do to their yaks. Thanks for watching.
@simplyrise930
5 жыл бұрын
@@FishingPOV 6:24 Wow. .just gave me another idea. Who needs a tent??? Hahaha lol. I bet a few people freak out with your drilling and sawing demo lol. Thank you again bro. Awesome.
@FishingPOV
5 жыл бұрын
Simply Rise yeah people have definitely freaked out over the holes, but I’ve not got any water in the holes I drilled but I get a bunch through the cockpit from the paddle LOL thanks again for watching.
Nice video and nice mods. Keep 'em coming.
I would highly recommend backing plates on ALL of those nuts and bolts. That's pretty thin plastic
@FishingPOV
6 жыл бұрын
trapangler thanks for the idea, so far so good without them. I haven’t had any issues yet.
@erichicks2978
5 жыл бұрын
I would recommend sealing all that shit.
@jeffreyulery2182
3 жыл бұрын
I'd also add well nuts in place of the nut and bolts
@chasmofsar2691
3 жыл бұрын
Many of the kits are set up without backing plates.
@jarrettabbott764
Жыл бұрын
I used rubber washers on my bolts
Love your name! I subbed, very nice trolley system. Simple and effective.
Brilliant..thank you, for all your secrets and tips... going to try to do these to our yaks ❤️🇬🇧 to everyone else who thinks they know better and telling him how to do it different,get your on vlog up and show your own show 😂
@FishingPOV
4 жыл бұрын
brits72 thank you and good luck with the mods thanks for watching.
Bunch of cool ideas thanks 🖖🏽
Love the ideas , thanks.
Very helpful video. I bought a Future Beach Mariner which is basically the same exact boat except with a small covered storage space on the bow. I will be using your ideas on mine for sure. Thanks
@voltigeurrelics
8 жыл бұрын
+Bass Hole What was the rough cost of parts for everything?
cool idea. i recommend heat shrink instead of tape to go around the knots.
@FishingPOV
7 жыл бұрын
sancochito75 I've used both, if you use electrical tape then heat shrink that's probably the best way to go. Thanks for the comment and watching.
@michaeldavis545
5 жыл бұрын
Or just a good knot😂😂😂
@ryandoherty4001
4 жыл бұрын
@@FishingPOV lomm.m
@rgsparber1
3 жыл бұрын
It has been 5 years, how has the electrical tape held up?
Great video. I added a paddle holder and two reinforced handles.
@FishingPOV
4 жыл бұрын
chris shields Awesome thanks for watching good luck out there.
Thanks for the vid, some great ideas.
These hollow body kayaks are great for diy modifications
@FishingPOV
2 ай бұрын
They sure are. Thanks for watching.
Great job. Thanks for sharing.
Badass upgrades!!!
@FishingPOV
7 жыл бұрын
TowMan127 thank you inexpensive and effective, gets you on the water without taking out a second mortgage.
That anchor system is genius!
Excellent video!
Great build!
@FishingPOV
7 жыл бұрын
jacob thank you
Thanks mate, some good ideas here.
@FishingPOV
6 жыл бұрын
Styli Sophia your welcome thanks for watching my friend.
I was just thinking today after coming back from kayaking on how to figure out a way to angle my kayak with my anchor, and here this video popped up!
@FishingPOV
11 ай бұрын
Replaced the para cord but it still works to this day. Thanks for watching.
$2 plastic flag pole mounts work great as rod holders.. bonus.. they have 2 positions you can use.. straight up and down to keep stuff out of way and angled position for trolling..
@FishingPOV
7 жыл бұрын
Bill Boyd nice, thanks for that info
@petevermouth6918
2 жыл бұрын
grin Thanks buddy.
nice job, I have the same kayak from Menards and it's actually really decent for the the price. I did the same thing to mine and also added some scotty tracks to the sides. Mine was 149 after rebate. rear flush mount holders were 10 bucks on amazon for two.
@FishingPOV
7 жыл бұрын
Thank you, I've been happy with it and the mods. I just recently upgraded to a Ascend 12T so I can stand and fish, but still use this one for the small rivers and ponds. Mine also was 149 after rebate.
@douglasfry6112
2 жыл бұрын
What does a pirate say when he gets kicked in the balls?. Aye, menards!
I got the same boat, the green one...awesome adds!
@FishingPOV
9 ай бұрын
It’s been a good kayak very lightweight.
Nice video man🙌🏻
@FishingPOV
6 жыл бұрын
Scotty Outdoors thank you bro I appreciate it.
Appreciate this video. Thx. The use of the good ol' fashioned screwdriver cracks me up though. :D
@FishingPOV
6 жыл бұрын
Mike Finch LOL thanks
The trolley anchor system….Thank you!!
This is very helpful. I am on a low budget and this helped alot.
@evandickson19
7 жыл бұрын
Breet Wat same
Thanks for the video! Good info!
@FishingPOV
6 жыл бұрын
JW Rhyne Jr. You’re welcome thanks for watching.
SORRY 4 CAPS, I LOVE YOUR CREATIVITY YOUR LOGO IS REALLY COOL. THANK U
@FishingPOV
2 жыл бұрын
THANKS GOR WATCHING :)
Used the rod holders from my Future Beach 126 to make a trolling motor mount. I use a Newport Vessels 46lb. Makes the bigger lakes a breeze. With the way I made it the rod holders are still usable.
great vid guys thanks for sharing
@FishingPOV
6 жыл бұрын
Knownas Hapy thank you and thanks for watching.
nicely done mate...
@FishingPOV
7 жыл бұрын
RCMods thank you
Wow, loved this video! I just bought mine (lime green) from Menards here in Omaha last week. Haven't taken it out yet- wanted to do some upgrades like you've done. Thanks so much for this information! I'll try to do as a good a job as you guys did! ... ps.. is the anchor trolley for an actual "anchor"? I bought a small 8 pound collapsible anchor and thought about using just a double screw eyelet like you used. ... pss.. got it for $169 after the 11% rebate. .
We just made eye contact... 😂😂.. Good video 👍
@FishingPOV
11 ай бұрын
LOL
Thanks for the ideas man
@FishingPOV
6 жыл бұрын
Ford Rushing you are welcome thanks for watching and good luck.
@fordrushing1916
6 жыл бұрын
What type of Kayak is this?
@FishingPOV
6 жыл бұрын
Ford Rushing Viper 10.4 if you do a google search you should find it.
Nicely done
@FishingPOV
4 жыл бұрын
RCMods thanks for watching
Love cheap mods !
Nice video and boat...thanks! Do they make attachments for sit-on-top kayaks that do not give you access to the inside for installation of the nuts?
Thanks! That is a very good video, I will be doing that.
@FishingPOV
3 жыл бұрын
Dil Lee you’re welcome thanks for watching
i added a short piece of bungee on the pad eyes front and back, with stainless pulleys from home depot (cheap and awesome) rather than run anchor chord thru the pad eyes. it acts as a shock absorber for choppy conditions and puts less stress on the pad eyes. also, i use stainless steel pad eyes from Austin kayak and canoe ( they also have pulleys and tons of great accessories) because i've snapped several nylon ones. do it right, do it once!
Common Stainless d-ring tie downs have the same spacing as the plastic deck eye fittings holding the original handles. I replaced mine, and have hauled up and down an 8 ft bank with no problems using them to drag it by.
@FishingPOV
5 жыл бұрын
Jeremy Himes great idea thanks for watching
Looks great guys!!
@FishingPOV
6 жыл бұрын
S Sweeney thank you
@ssweeney9691
6 жыл бұрын
Bass Hole. Supposed to be getting a lifetime kayak 120 today. Definitely going to use some of these mod ideas.
@FishingPOV
6 жыл бұрын
S Sweeney good luck and don't forget to wear life vest. Also here's a link to my playlist where I got more in depth videos on some of these modes if you need it. kzread.info/head/PLfVZfM-DJU_q14F2e4JGl6QcNiquYWFCf
@ssweeney9691
6 жыл бұрын
Bass Hole indeed copy that!!!!
Best outro I’ve seen to this day.
Great video. Thanks
@FishingPOV
3 жыл бұрын
Thanks for watching good luck out there
Looks like you had fun and sure added more to the adventure. I would invest in the pop rivets they do a great job and very reasonable. I always changing up stuff on my Kayak and that is part of the fun. Fish on.
@FishingPOV
4 жыл бұрын
Big Rick's Haberdashery thanks for the info and thanks for watching.
cool video mate
I wish I were brave enough to start drilling and sawing into my kayak so I could do some cool mods. Great video! I did have to replace some eyelets on my kayak. I used marine sealant from our local Ace Hardware on the eyelets on the inside of my yak. Yeah, it's a sit-in and invasive water in the cockpit is unavoidable, but, I felt better inside by covering the bolts w/ marine sealant. Guess I'm OCD like that! LOL
@gunnarbiker
8 жыл бұрын
Yeah I added sealant more for my OCD than anything! HA!
Trolls system gave me another mod idea! I've already added cleats, deck eyes AND recessed shark eye navy lights to my eagle run 12. Nice work man!
@jasonsmith6408
7 жыл бұрын
*trolley
@jasonsmith6408
7 жыл бұрын
Spellcheck killing me without my reading glasses! 😂 *navigation lights UGH! Again, nice work
It would be great if you did/do a follow up video on the water demonstrating how each of the additions to the kayak work/function or benefit the fisherman.Especially the anchor trolley.
@FishingPOV
4 жыл бұрын
Rick Barraza sorry I’ve had a lot of changes in my life over the last couple years and finding time to make videos had been tough. The anchor trolley is all based on current and wind. Being able to anchor at either end of the boat helps position yourself for casting. Hope that helps and thanks for watching.
@Acrylic24
4 жыл бұрын
I hear you. As we get older time seems to fly. I’ll search for “kayak anchor trolley” vids out there. I’ve already purchased and installed the rod holders from Yakattack just like yours on my old blue Tarpon 120. The thing is like 16 years old lol. Mine came out looking just like yours, angled to the outside of the craft. Thanks for the reply!
I found that your DIY upgrades were extremely thoughtful. I find that a thoughtful and capable "end user", person can often accomplish for dollars, that which high paid engineers sometimes obtain for much more. Power on!
@FishingPOV
7 жыл бұрын
mark jones thank you
@sinnastevenson2302
3 жыл бұрын
Assuming one has the expensive tools to begin with.
Nice fellows it’s the KISS method “keep it simple stupid”.. whatever helps u on the water..good job
@FishingPOV
2 жыл бұрын
Thanks for watching
Très intéressant! J'aime quand les gens utilisent leur tète et partage les infos. Very interesting! I like it when people use their head and sahre ideas! Thank to you!
This man was huffing and puffing when he was talking about his rod holders
Wow this video has 22000 views congrats good diy video...always good to see ur videos
@WesternPaAnglers
8 жыл бұрын
+Bass Hole very good idea can't wait to see it
Simple and practical!
@FishingPOV
3 жыл бұрын
And it still works five years later
@FishingPOV
3 жыл бұрын
Thanks for watching
what exactly does the anchor trolley system used for? i understand how to use it based on your explanation but im new to this and dont know what its used for lol. i just bought a equinox 10.4 from costco, exact same kayak. thanks man, great vid and ideas!
@brandonsyatessr.3667
4 жыл бұрын
My wife has the same... Great little boat
hey dude amazing video!! really learned some stuff and put some of those modifications on my kayak! quick question, I am looking to get an anchor for my kayak do you have any suggestions or ideas? thanks alot!!!!!!!!!!
@lincolnrenfro4725
8 жыл бұрын
+Bass Hole thanks I will definitely try it out! thx for the advice!!!!!
Nice I love diy is fun and cheap lots to lear
@FishingPOV
6 жыл бұрын
Aquamanny yes sir I tried doing it cheap but still make it so it lasts. Only thing I’ve replaced in a few years is the para cord. Thanks for watching.
Very nice!
@FishingPOV
6 жыл бұрын
Big Vito thank you
6:20 911 what's your emergency? Yes we have a man being swallowed by a kayak😂
@FishingPOV
6 жыл бұрын
Kyle Outen LOL thanks for watching.
good tips bud
Nice Video man, I have a cheap kayak I did some mods to, ill have to make a video so you can see it
@FishingPOV
6 жыл бұрын
Alabama Angler thanks bro yeah leave me a link when you do id like to see it.
After watching you use electrical tape on your paracord knots it got me wondering if some heat shrink sleeve material might work for this application. Great video!
good stuff. thanks
This is great for me! Something I am looking into now! I am looking at getting a Kayak for fishing and this would be a great alternative to buying an expensive anglers kayak! How much did the kayak cost?
Very well done with that plastic cuting in a cricle with the jig-saw I would know how hard it is.
@FishingPOV
2 жыл бұрын
Thanks and thanks for watching
Nice vid