At my apprenticeship with Massey they taught us to pack the bearings first on the palms before we installed them. Good goop job.

Dave is good at what he does. You really should never tell a mechanic how easy his job looks.

@thefunkyfarmer

9 жыл бұрын

Yes he is.

@mattgordon5765

6 жыл бұрын

Love the video

Love these old Massey's.

Nice tidy job by the way great video's too

grease is basically oil and soap mixed together,then dyed what ever color you want

Nice video, only thing is that i would do different is what we call pack the bearing with grease. This is to make sure the bearing is covered in grease within, not just putting grease in the hub where the bearing paths are, you get a hold of the bearing and push the grease through the bearing at one end of the rollers, until it comes out the other side, this is to prevent the rollers picking up on the path due to lack of grease in the center of the rollers. I have changed a lot of bearings on commercial vehicles over the years and tractor, cars, trucks buses all use the same idea. So just in case you do the other side by yourself, Please pack the bearing to make it last longer. PS: Like said always use a new split pin after pre-loading the bearing play, best to tighten with ease, and then just move it back to the next slot for the split pin to fit in ok, and you will find this should be good, but also as a further note would be at best interest to re check the nut after about 100 miles, whatever that is in hours on a tractor. hope this helps all you Farmers wanting to watch this video and have a crack at it yourselves?

@thefunkyfarmer

9 жыл бұрын

Thanks for the tips, very useful

Great video I needed to know if the caps spin off or not and they do. Wish this 1975 265 had an oil point.

What a nice bloke

@thefunkyfarmer

10 жыл бұрын

yes he is

@crimsonsunshine264

5 жыл бұрын

thefunkyfarmer a top man 👍🏻

@johnseabrook5649

4 жыл бұрын

My sentiments, exactly

@blakes111

3 жыл бұрын

That’s my uncle David!

Thought you might of least offered him a cup of tea !...nice vid though

@thefunkyfarmer

10 жыл бұрын

I'm feeling guilty now

I've got your Massey ferguson 135 set as my screensaver

@thefunkyfarmer

10 жыл бұрын

Nice 1

The old styem of training was better and the trainees where better protected I heard .

nice vid how ever I will leave u with one thought , if one side has given u trouble u should think seriously about doing the other side too, saves u headaches for the near future

@thefunkyfarmer

10 жыл бұрын

good point Ricky

The jack doesn't look all that secure on the block

good video Sir. you love Massey Ferguson like me. the tractor loader is the original of Massey, right? where is this farm full of Massey Ferguson?

@thefunkyfarmer

8 жыл бұрын

+Jorge Reino yes it is. We are in Gloucestershire

@jorge_m_reino

8 жыл бұрын

nice, maybe one day visit to your collection. like cows and Massey Ferguson tractor as you

@jorge_m_reino

8 жыл бұрын

when thinking about buying a new recommend the 5610, good to work with frontloader. and pump flow rate of 100 liters

what do you use the loader for?

@thefunkyfarmer

8 жыл бұрын

not much these days

Do you still have a Massey 35 ? can we see it ?

@thefunkyfarmer

7 жыл бұрын

Haven't had a 35 for 15 years

Looks like you do abit of milk recording? re: NMR van parked in yard.

@thefunkyfarmer

8 жыл бұрын

good spot

im comment for my son he is asking why don't you get a jersey

Nice tidy job by the way great video's too