Fishing Kayak Setup Ideas - My Favorite Hacks
Спорт
Check out my personal favorite fishing kayak setup ideas that show many fishing kayak accessories as well as the fishing kayak modifications I made to optimize my Jackson Coosa FD setup and you can apply these to your fishing kayak as well; proving fishing kayak mods do not have to be complicated or costly.
Subscribe to Kayak Hacks: goo.gl/BAxRXd
You can follow the channel on FaceBook as well.
Check out the switchfisher.com for fishing reports (VA, MD, WV, PA, CA), and fishing tips in the blog.
The Kayak Hacks Fishing channel covers kayak, hacks and mods, wading, shoreline, spin, and fly fishing. It features gear mods to make kayak fishing more comfortable, efficient, and enjoyable. I share many tips, tricks, and "how to's" for both spin and fly fishing. These are useful regardless of whether you are fishing from a boat or on your feet. Please subscribe! Thanks!
Steve's CatchGuide series of fishing books are available on Amazon. They cover where to fish in Maryland and Virginia as well as tips for Fly Fishing. Just search for "Steve Moore Fishing."
Affiliate Quick link: amzn.to/2V5otGr
Affiliate Disclaimer:
I do not have an affiliate or sponsorship relationship with any brand. I do have an affiliate relationship with Amazon. As an Amazon Associate, I earn from qualifying purchases.
Any product link to Amazon is an affiliate link. I appreciate your support in using those links since the small commission generated offsets the cost of the stuff I test for the channel. Thanks!
In short, you accept all risks of using any ideas presented in this video. Do not apply any suggestion if it will ruin the appearance, function, or structural integrity of your kayak.
Nothing in this video creates any expressed or implied warranty or guarantees a result. I shall not be held liable in any way or manner for errors, misleading, or incorrect information. If you find an error, please notify me right away using the contact form for the channel.
The bottom line is that you must make a judgment and not rely on the opinions expressed here.
Between 2021 and 2022, I encourage you to visit FortMoore.com and support the initiative to honor military families by renaming Fort Benning to Fort Moore.
Пікірлер: 63
I did a search for KAYAK RIGGING. I've watched at least 10 and not one mentions putting a loose marker bouey in your kayak to fall out and mark where you rolled it. Ever since my first roll, I've always had at least one bouey in every kayak and at the moment I own more than 10 kayaks. I've commented on every video about this hack. Keep em coming! Oh yeah, my PFD is a blow up snorkel vest.
@KayakhacksFishing
2 жыл бұрын
Good point! Thanks
Getting to see them one after the other was impressive- a stroke of genius. It is amazing what you have done to cover the bases in your kayak. When you see them all together it is very obvious how much work you have done to make your kayak a fishing-catching machine. You forget when they are spread out and limited to two per week. Keep up the excellent work!
@KayakhacksFishing
3 жыл бұрын
lol! Now I just need some better fish catching luck. The reds are just starting to come back over here. Hopefully, get a few in the boat this week.
Steve. Thanks for sharing your ideas and insights. Love the “air horn hack” for safety on the water 👍😎.
@KayakhacksFishing
2 жыл бұрын
Glad it was helpful!
You clearly like to play around with ideas. You've come up with some great ones. It's going to be a lot of help. Cheers buddy.
@KayakhacksFishing
2 жыл бұрын
Thanks 👍
Great video Steve, I will definitively try some of these out when I get my new kayak in the spring.
@KayakhacksFishing
2 жыл бұрын
Please do!
Awesome like all of them.
Excellent video!
@KayakhacksFishing
3 жыл бұрын
Thank you very much!
Great ideas Steve. Thanks a lot! I’m definitely going to use the slider “drawer” under the seat, and the buckets in access holes. I already use your Velcro tool rack among a few others and they work great! I’m working on a PVC standup leaning bar, mounted in front flush mounted rod holders for use while flyfishing. I’ll let you know how it turns out. Appreciate the brainstorming ideas! Have a great week! 🎣👍👌✌️🐟
@KayakhacksFishing
3 жыл бұрын
I would love to see the standup bar!
Scotty rod holders are so much better than those rocket launchers. I really enjoy your videos!
@KayakhacksFishing
Жыл бұрын
I like they way they adjust.
Set the hook brother, I say make your kayak your own …..custom…..
@CoreyB777
2 жыл бұрын
I think that's what dude in the video was implying. Also I think he was just showing off his modifications to give others ideas to go off of.
Genius 👍🏼
Lol- I was thinking the same….dang his boat is like Me Gadget
I got some catching up to do. Thought I watched most of your videos. Thanks for all the great ideas. Bret SYOTW
@KayakhacksFishing
2 жыл бұрын
Glad you like them!
You da man!
On your kayak cart, the wheels are small. A bike shop may have junk bikes and a 12-20" wheels would help the cart move over the grass easily
@KayakhacksFishing
3 жыл бұрын
Good point. I got the wheels for $5 each. They work fine on my lawn, but larger is probably better!
I went high tech and use a rock on a rope as my power pole... 🤙
@KayakhacksFishing
3 жыл бұрын
lol! Works!
Really enjoyed the video!!! That's pretty close to what I asked about 😎. There were a couple of those I missed somewhere. I really like the camera stabilizer - looks like it works like a gimbal 🤔. I'll need to track that one down. Loved the " how does the kayak not sink with all those hacks?" 😂🤣😂
@KayakhacksFishing
3 жыл бұрын
lol! I got the stabilizer at best buy. Probably cheaper elsewhere. Here is how I made it - kzread.info/dash/bejne/oZZot8ytaauvm9I.html
@2reelyakrz481
3 жыл бұрын
@@KayakhacksFishing cool video!! Thanks for the reference! Also viewed the side/rear mount camera. Saw on on that one about an inexpensive Action Camera with image stabilization. We have a tandem kayak with Action Cameras mounted in the middle of the kayak aimed foreward and aft. The cameras we have have exposed USB charging ports which I have connected to a DIY battery box, so they can run for hours with no battery changes - really handy. There is a tradeoff between field-of-view and lens distortion because the cameras are so close to us. I haven't had time to redneck engineer a setup which provides the angles your systems have with the ability to externally power the cameras while at the same time protect them from saltwater. Though it's on my to-do list for someday 😎
@KayakhacksFishing
3 жыл бұрын
@@2reelyakrz481 Good luck with that! Fiddling with field of view is beyond me. I just go with linear to remove distortion!
@2reelyakrz481
3 жыл бұрын
@@KayakhacksFishing I do too because I'd prefer narrower with less distortion to wider angle with fish-eye look. Your solutions place the cameras at a greater distance to the subjects than our setup, so they should take care of the tradeoff problem. The challenge for me is to be able to continuously power the cameras (no changing batteries) without the risk of saltwater getting in them and releasing the magic smoke (which is the special ingredient all electronics have which make them work 🤣)
@KayakhacksFishing
3 жыл бұрын
@@2reelyakrz481 lol
Great stuff!! Did you do a video on the cart build?
@KayakhacksFishing
3 жыл бұрын
Yes - kzread.info/dash/bejne/oZZot8ytaauvm9I.html
@jelly_fishing
3 жыл бұрын
I clicked a link it is for the camera stabilizer - was looking for the cart. Thanks
@KayakhacksFishing
3 жыл бұрын
@@jelly_fishing whoops - kzread.info/dash/bejne/ZYqpt4-SdaWydLA.html
Hey I just recently bought the teton angler. I've owned a hobie but someone else needed it more than me. I'm trying to make the best of my situation, so I've been rigging up my kayak for bass, catfish, and trout on a swift river. I am wondering if you know what track mounted cross bars would fit, or DiY options? I've thought about pvc. But I do like the "feel free" bar, but again not sure it will fit. Any feed back would be greatly appreciated
@KayakhacksFishing
3 жыл бұрын
I have not looked into that. Good topic for the future, but for now, I am at a loss for advice
I have watched your video on the wood working t track. I have a star rival isup. On the right side there are 2 factory installed scotty bases. My thoughts are to use the t track on that side for mounting paddle holder (yack attack rotory holder) Net holder. I think yack attack makes the 3 rod holder set up . Do you recomend the t track, or should I get a hobie h rail kit ? Truth is I have not measured the distance between pads yet, so I am not sure if I can mount the hobie h rail just yet. But I am asking about ease of use between the 2 styles of system Do you have hands on experience with the h rail kit ? Which style handles twisting force from weight better?
@KayakhacksFishing
2 жыл бұрын
Since I have not used the H rail kit, I really can't offer an opinion.
Can you please send me a link to the video of how you made the anchor stand and also on the radio you tested. I could not find them.
@KayakhacksFishing
3 жыл бұрын
Anchor hanger - kzread.info/dash/bejne/jGyIs9GDZs6ec5c.html Here is a link to the radios we use - amzn.to/2UOrVZY looks like they are out of stock. But, there are similiar models out there. I recommend you watch this video to make the right pick - kzread.info/dash/bejne/pn6XpLidc5m5aKw.html
do you have a video on the weed hacker line hack? thanks!
@KayakhacksFishing
Жыл бұрын
Sure - I think this is the one you want - kzread.info/dash/bejne/d42mzpJxpKiWgaw.html
@lawrence1md
Жыл бұрын
@@KayakhacksFishing thank you!
question of a beginner dyier... the holes that you made, does not became a fountain of water inside the kayak? It´s necessary to use silicon or something?
@KayakhacksFishing
Жыл бұрын
None of the holes are below the waterline :-) In addition, the ones on the top and the side are very small with compression from whatever I attach. Well nuts are a great option to attach things that also creates a good seal. But, again, nothing below the waterline.
@gapler
Жыл бұрын
@@KayakhacksFishing Ok, but if you flip your kayak, what are the risk? I think that will not be a flood, but a small amount of water enters, or not? In this case, use silicon could be a safety+ ?
@KayakhacksFishing
Жыл бұрын
@@gapler The screw holes are really small, I think it is exceptionally low risk. But, as you indicate, a bit of sealer will not hurt
Im slowly putting things on my fishing kayak. I got a clip leash for my kayak for tying up to docks, I got a grappling anchor made for Kayaks. Also I got my net on a leash attached to my kayak, and my fish gripper is also on a leash too and paddle. I want to put lights, rear view mirrors, that wheel thingy, camera mount, rod holders, I am gonna put some type of custom made live well tub on the back that's not too big or small but just right for storing fish.
@KayakhacksFishing
2 жыл бұрын
It will be awesome when you are done!
Link for the phone holder?
@KayakhacksFishing
3 жыл бұрын
amzn.to/3iSeFvB
Haw about a catch a and cook…. Thanks
@KayakhacksFishing
3 жыл бұрын
I did one a while back. I have a new recipe I need to show. Thanks for the poke.
Up
Kayaks
How to turn a kayak into a garbage scow
@KayakhacksFishing
Жыл бұрын
lol! Everything has a purpose
Waaayyyy too much stuff on board, and why must you call everything a “hack”. Can’t it just be a modification instead of a hack?
@KayakhacksFishing
2 жыл бұрын
lol! You are probably right