turning on the mini lathe out in the desert is an impeccable vibe

@BPSspace

4 ай бұрын

Honestly top tier experience, I've turned things on a lathe outside twice now and both times have been magical

@mduckernz

4 ай бұрын

Also, pretty much ideal situation for turning graphite :D heh It’s so awful, covers everything, shorts out stuff, ugh

@NNFaNRacing

4 ай бұрын

@@BPSspace I worked in a machine shop through college but, my favorite machining experience was with a mini lathe sitting on a cooler in the pits of Michigan International Raceway. Something about the way natural light reflects off of the freshly machined surface...

@spankyjeffro5320

4 ай бұрын

No. It's not.

@jblob5764

4 ай бұрын

​@@spankyjeffro5320 everyone can have an opinion, yours is just wrong

20:35 That was the most Kerbal Launch I’ve ever seen.

@ricardorola509

4 ай бұрын

We need moar boosters now 😂

@vigilantcosmicpenguin8721

4 ай бұрын

Life imitates art.

@dragonace119

4 ай бұрын

@@ricardorola509 The only time there's never enough booster is when the struts physically cannot support more, otherwise just keep stacking them like is Jenga.

@Relkond

3 ай бұрын

When the hazardous article passes over the bunker you occupy at low altitude…time to stop and ask ‘what safety items did we miss?’ Sheesh, hope you gave some crap to whoever suggested that.

@4thfrom7

3 ай бұрын

Hey it went up eventually. 😆

Valentine’s Day is for new bepis space videos

@JonahGreve-bn6jc

4 ай бұрын

And don't forget, Ash Wednesday too

@jacks__9229

4 ай бұрын

Bepisssss

@creativecarveciteclimb5684

4 ай бұрын

I love bepis spacis.

@shreyasjha576

4 ай бұрын

All hail bepis space

@TheGlitch93

4 ай бұрын

I pray to our over Lord BePis Spaice

You should really name a propellant you develop later “Mystery Goo”.

@Wurtoz9643

4 ай бұрын

Mass produce it. Then make sure the manufacturing process is overseen by a guy called “Bob”

@aidenwikto9492

4 ай бұрын

Hard to bring on mun landings but a good payoff.

@angelpenarolo7408

4 ай бұрын

It seems to be silently judging you

@WawaDvd

4 ай бұрын

Based on the amount of precision and attention put into the manufacturing of the propellant... it is absolutely NOTHING close to mysterious 😅

@p_rry

4 ай бұрын

Love the reference

20:25 was worth the price of admission alone. Man, I'd love to see a series of sketchy motors being fired (safely please). That was spectacular.

@wow-roblox8370

4 ай бұрын

“Dynamic static fire” is something that can be both awesome, and terrifying depending on how safe you are if it comes flying at you

@MalcolmCrabbe

4 ай бұрын

That was so entertaining I had to watch it twice... "Huston we have a problem !" 🙂

@TheActionBastard

4 ай бұрын

I just started that suppressed "holy shit" laugh you do when you know you messed up but it's too damn cool to be mad about.

@BayAreaBerk

4 ай бұрын

A sized motor, balsa wood fins and an Elmer's Glue cap as a nosecone.

@MatthijsvanDuin

4 ай бұрын

After a bit of a rocky start it flew remarkably well, especially for a static fire.

20:25 The fact that FAR actually told you to do that makes it so much better Apparently if the motor really wants to fly, even pointing the flamy end up won't stop it 😁

@mojaverockets

3 ай бұрын

When people tell me they have a motor they believe has a high chance of exploding, I suggest to them that they put it in the ground. We do that with all our 12" KNSB motors kzread.info/dash/bejne/l5mDuMqKe9G6lso.html

I swear I coated all three sides of that mandrel, and I *know* I sanded it smoother than a baby's bottom. Next time I'm gonna dip it in E236 and save us both the trouble!

@BPSspace

4 ай бұрын

I will say, I've never seen a smoother 3d print. Your sanding game was next-level sir

@Horus2Osiris

4 ай бұрын

Consider something hydrophobic... Pure silicon over hard wax?

@kenshinbattousai374

4 ай бұрын

High recommend considering a heated mandrel with sprayed on wax release. This should offer you excellent control over the surface quality, this avoiding(hah) the pitting seen in this video.

@kazzxtrismus

4 ай бұрын

avoid silicone like the plague@@Horus2Osiris anything epoxy resin like will develop voids "rejection" zones ("fisheyes") all forms of paints hate silicone....silicone is really incompatible with anything but silicone where liquids gels etc harden polymerize etc interactions with surface tensions are weird, silicone seems to collect with itself in random sized groupings.... if the silicon has ever reached near zero Celsius all bets are off in every characteristic

@normellow

4 ай бұрын

@@BPSspace can you use a Teflon plastic mandrel? We use Teflon plastic at work, and nothing sticks to it.

The dynamic static fire at 20:33 is going to be the coolest thing I've seen in 2024

@leomathguy

Ай бұрын

That kinda looks like a missile ngl lol

21:05 the face of "oh no"

@ultrafly4994

Ай бұрын

that look had me rollin😂😂

20:50, good example of why its out in the desert and there are safety stands

Omg that was a very dynamic static fire.

That runaway motor made me chuckle. It just kept getting angrier and angrier!

that rouge motor was awesome, if a bit scary. the fact it started by mortaring itself 30 feet in the air and still managed to fly relatively smoothly once it did get airbourne? that's just some beautiful physics.

@aaronhall7740

4 ай бұрын

Yes that was pretty epic!!

@Ben-sh1dl

4 ай бұрын

I'm guessing it had some inertial spin from rolling on the ground, then it maybe hit a pebble?

@zerumsum1640

3 ай бұрын

@@Ben-sh1dl a little of that, but i think the nozzle broke and gave it some spin. looked to me like on the ground it started spinning faster and faster, eventually bouncing somewhat upright and spin stabilizing itself. it was pretty late in the burn, so it probably was on the tail end of the thrust. as it dropped off, it tilted over and zipped overhead. note: this is a guess, based on the video. it mostly looks like it's spinning up on the ground to me because of how it starts bouncing itself higher and rolling in circles.

@NineSun001

3 ай бұрын

Should be a new launch category. Mortar assisted launch. Fun to watch, hard to nail, perfect for youtube :D

@zerumsum1640

3 ай бұрын

@@NineSun001 ooh, that would be an interesting challenge. Would have to build strong rockets that are still light enough. have a couple of "classes" with different hole sizes and depths. Tricky bit for this would be doing it safely, as tossing a few pounds of dirt into the air at launch would definitely cause some stability issues for the first few feet.

The surface pitting in the core might be from residual propellant dissolved in the release agent offgassing while it cures, so just letting the release flash off longer before casting, using a brush-on release, and/or curing in a pressure pot may improve that.

@lukasdimmler2622

4 ай бұрын

I also think a pressure pot is the way to go after pouring. The bubbles get smaller without any large voids at an intermediate stage (like with vacuum degassing), so you can safely let it cure while in the pressure pot.

@Skinflaps_Meatslapper

4 ай бұрын

@@lukasdimmler2622 The downside is that you have pressurized air in those bubbles after curing when you take it out of the pressure pot. Usually it diffuses through over time but sometimes can lead to cracking if there's enough of them and everything goes wrong.

That rogue rocket has to be the coolest and most terrifying thing i have seen in a minute

18:36 the minute I saw that spike on the graph so early on I knew something super spicy was gonna happen :) 20:30 The noises it made were just unreal. Incredible camera work too keeping up with it!

20:52 that’s a very happy rocket motor 😂

@AkashSuresh-yb7xw

4 ай бұрын

😂😅

@PrograError

4 ай бұрын

" I'M FREEEEeeeee~~~~~~~ " *mincecraft hurt noises *

@Dycell

3 ай бұрын

I’m doing it, dad. Look at meeeeeeeeeee…..

"Yep, there goes the nozzle... " - Another one of Joe's amazing one-liners😂🔥

I would say that a good set of sieves is needed to help in grain size. Sift though a little bit larger size sieve than with desired size, getting clumps or oversized, then sift through the size wanted to get out powder, broken grain and leave desired size. If the sieves will stack, you can do in one step and it will sort by size. They also help alot while just getting the ingredients ready for mixing in general.

@stellviahohenheim

4 ай бұрын

nobody cares

@andreagallo7550

4 ай бұрын

Was thinking the same. With ASTM sieves it might be possible to get down to a size delta of 10-30 nm. They stack and can be used with a mechanical shaker

@Skinflaps_Meatslapper

4 ай бұрын

@@stellviahohenheim You cared enough to comment, by your own definition that means you're nobody. Sick burn, my dude.

@josephastier7421

Ай бұрын

Yes, stackable sieves are common equipment used in geology and pyrotechnics, two fields where determining grain size is important, the latter critically so. This way the mesh size could be determined empirically and not just trusted off the label. Because the label will always be wrong.

@andreagallo7550

Ай бұрын

@@josephastier7421 That is only partially correct. Sieves for scientific applications come with a calibration certificate reporting actual mesh size and tolerances for each single unit. Obviously, that is reflected in the price.

I love that the mixers are named Bob and Doug

I like your moustache

@mirzamahboob393

4 ай бұрын

i like your Portuguese mustaches and also tomatoes

@GamerLudwig

4 ай бұрын

next project found i see XD just gotta find a big desert to test it in

@jesperwall839

4 ай бұрын

I hate tomatoes

@suvankumar9929

2 ай бұрын

Tomatoes are disgusting

When reloading ammo , the propellant can be measured out using very sensitive scales for every cartridge. Yet when testing the velocity when fired from the same gun, it can vary many feet per second when all things are equal. Sometimes the universe just messes with you.

@vicroc4

3 ай бұрын

There's a lot of variables at play that can't quite be accounted for. Even different batches of the same powder will have slightly different burn characteristics. Not to mention slight variations in case volume, seating depth, bullet length and diameter, neck tension, the list goes on and on. So yeah, it's amazing we reloaders can get the kind of precision we do. A couple dozen feet per second is actually really impressive.

Great science requires patience, good record-keeping, and a long attention-span. Very few people can do this. Nice work!

You just cheered me up, like I was so feed up and lonely that I can't describe,but you just made me remember my first love space and Rockets. what a perfect timing!

@knight936

4 ай бұрын

andrew tate!!! GET IN THE GYM

@stellviahohenheim

4 ай бұрын

You should just give up

@daveabittner

4 ай бұрын

@@knight936 fuck andrew tate, pursue rockets and space and fall in love with fellow rocket and space enjoyer andrew tate sells loneliness and misogyny

@kurtdowney1489

4 ай бұрын

​@@stellviahohenheimAnd your mother should of swallowed. Best part of you ran down the leg of the landlord.😂

Absolutely beautiful! As always I should add. Your perseverance is what sets you apart from everyone. You consistently outdo yourself not just in terms of knowledge and technicality but also your craft. Watching your videos is like watching an ideal engineering journey. Thank you for being a forever inspiration!

For the longest time, I've been hoping BPS Space would venture into this remarkable territory. Crossing the Kármán line is a dream many of us share, and your expertise could make it a reality. Here's to eagerly anticipating the realization of this long-awaited ambition! 🌌🚀 😊😊😊😊

Joe, I can't adequately say how much I enjoy your videos. I'm impressed with every one. Not only the technical (and that's lots) & videography, but also the emotion and struggle. Keep at it and I'm thrilled how much you are sharing with us. Blessings

I admire your persistence and continued learning. Keep up the good work.

I sometimes cast statues with very slow running plaster, and I find that vibrating the outside of my mold really helps bring bubbles to the surface through liquefaction. I mean, it's surprisingly effective. For vibrations, I use a very cheap battery operated massage machine (looks like a silly gun). Maybe you already do that and I've just missed it. Not sure if it would work here, but every bubble you evacuate is a bubble less to cause issues.

@mduckernz

4 ай бұрын

Yep. When I cast propellant, I vibrate it while vacuuming it, using an extremely jank thing I made haha: it’s just a rotary sander with a heavy weight glued very off center on it. When it spins up, it vibrates like crazy. It is clamped down to a table, suspended on some stretchy ropes, on which the vacuum propellant pot sits. So the table is vibration-isolated from the rest of the room, and the vibration device makes the table vibrates very strongly with very little lost to the surroundings :) It looks absurd, but it works great

@blakedblake6143

4 ай бұрын

Back in the 90s, i was working in a patternmakers shop and we cast thermoforming mold forms in aluminum epoxy. Vibrating the bubbles out was a very important part of that as it made the forms last longer. No voids. I don't remember the ratio of aluminum powder to epoxy, but I do remember that it barely poured.

I have never built or fired a rocket in my life (although I'd love to) but I still thoroughly enjoy watching all of your videos. This one was particularly interesting, seeing how much work, math, precision and money goes into engineering new propellants.

I was going to say "Teach me your ways" but then I realized thats what you just did for the last 30 minutes... I just wish I understood it all, love the vids! Thanks for sharing the journey!

This is truly taking a look at the inside of rocket science. Going deep into the pour of a solid motor. I'm really gaining an appreciation of the complexities involved. Thanks for sharing so much of your progress.

Unplanned subspace launch… With the torch of destruction running around like the Roadrunner before it gets off the ground?!! AWESOMESAUCE!!!

@vicroc4

3 ай бұрын

Like one of those ground spinner fireworks. And then it decided it didn't like the ground so much. XD

Every time a new high quality video of BPS is released i try to get some quiet minutes (it's really a quality time for me) as fast as possible and enjoy every minute of your content! Thank you so much and keep on going!

Outstanding Sir! I’m amazed at your patience and perseverance. Thank you for sharing this.

This is the first of your vids ive seen and i already love it. Thanks for the content!

Man 20:25 can be a show in its own right. I held my breath the entire time. JHC!

Man, I don't know how you get the energy/time/funds to do this work, but it is absolutely incredible. I'm so impressed with the quality of the video itself that sometimes I forget how insane is this rocket science. Best regards from Brazil!

Really nice to see you smiling and taking your time :), thankyou for sharing your journey

Excellent stuff. Great to see your subs numbers so high. You've come a hell of a long way.

I hate how long i have to wait cor these videos but every single time the wait is so worth it!!!

Always the best half-hour of my day!

Seeing the failures and mistakes of these videos seems like a difficult challenge to overcome come, but I’m impressed on how the way you preserver and over come. Your mindset is a very good one and I hope you continue to overcome these challenges the same way you always do!

Joe - I am SUPER enjoying this series!!!! Excited for what you do with it, keep up the great work!

I think I watched that one k motor failure like 15 times. I know it was actually a pretty dangerous situation but extremely entertaining from the safety of a tablet screen!

20:36 this sequences was amazing lol

Bro I love following along your awesome videos. Watching a genius at work 💯

Stunning....Great info. Amazing explanation (with lovely simplification). Wonderful storytelling. Terrific video production. And...fun. Couldn't ask for more. Thank you.

I like discount Elon Musk more than Elon Musk

@theoneway22

Ай бұрын

Bahahaha! Agreed!

@TheGuyWhoComments

Ай бұрын

@@theoneway22 I find it funny that translation removes the B and adds an extra HA

@MozTS

Ай бұрын

Nword class motor

@jeeBisOkay

Ай бұрын

Hey that's awfully rude, nobody deserves to be compared to Musk.

@charleskavoukjian3441

9 күн бұрын

Without elon there wouldn’t be a modern space race 😂

21:00 "Certainly one of the more _dynamic_ static fires I've seen" - that's a way to put it XD

This video encapsulates years' worth of information, presented in a well-documented and thoroughly explained manner. Your determination truly shines through!

Well done! Really enjoyed watching your process, and I'm looking forward to seeing where this project goes from here.

You can finally actually call it Barnard Propulsion Systems 😁

You really need to include a non fish eye lens to photograph the horizon to show them flat earthers because they always scream "fisheye lens" on every rocket horizon photo

Been following this channel since you had like 4,000 subscribers. Absolutely love what you've been doing!

wow! so much technical information explained in laymen's terms . thank you very much !

Dont mind me tuning in to the youtube space program

NEW BPS VIDEO 🗣️🗣️🗣️🗣️🗣️

I know how much work it must have taken at your age the skills that you have are absolutely phenomenal... I'm sure you will spend that into something very important for us to come.

That is a very impressive project, extremely well done. Kudos!

I get a Breaking Bad vibe at the beginning watching you mix chemicals. Is there a slight taper to your mandrel and that blue thing?

This was an excellent video. I love seeing clear development methodology. Thank you so much for sharing this. 👍👍

Love the content Joe! Not only is the content interesting, I can tell you take great pains to make it visually appealing. It’s very impressive stuff. If you have ever wondered if people notice, I do. Keep up the great work!

I will never do rocket building like you do, but watching this is exciting, every. single. time. Thanks for putting so much effort in the vids!

Another fantastic video, Joe, so much information to digest much of it above my head, but I love it anyway

Glorious testing as always

Dynamic static fire. Good one. I am gonna borrow this.

Another superb video. Love your process. Keep up the great work Ad Astra! :)

Always good to see a fresh video, man. It's also good to see that I'm not the only one who hits roadblocks on projects!

Fascinating process, thanks for the details.

Another world class bps' video , which I love soo much 😍

Amazing video!! I follow you since years. Every time it is a pleasure watch your creations.Very well done. Absolutely #1 in rocketry videos. P.s. I love your statememt ,"the most dinamic static test .. " 😂.

....and that's why it's called rocket science. I jugst love this. It's so interesting hearing you go through your method.

Dude, the mach diamonds show how powerful your motors are, very impressive! 🤯 20:32 had me rolling on the floor laughing 😂😂😂

NicE work good sir, I look forward to seeing you're successful launch some day. Good luck 👍

From a California model rocketeer of the 60's, major congrats. Back then it was Estes Industries and tiny rockets with parachute recovery, but super cool for a high school kid! I wish you every success. Please be safe. "Coach Gary" Micheloni

Awe, your moustache looked great. Thanks for sharing your research and results!

Awesome job man. I wish i kept up with model rockets but i still love watching them launch and im glad i found your channel since it is more along the lines of big league rockets. Keep up the great work and i will keep watching from my place in AZ lol.

I realy like your videos. Especially the editing on this one

That "static" launch with the broken motor was quite the show! It's good it didn't hit anyone (or the car) Great video as usual!

Thanks so much man for sharing your knowledge for free, more powers to you

That was one angry, little rocket. Super excited to see the next steps!

I know nothing about any of this, but for some reason found this fascinating. I watched the whole video without skipping.

BPS coming in clutch on Valentine's day?! ❤Love your work with lots of love!

Great job on these!

Pro to: Use compressed air to encourage the propellant to separate from the plug mold. Just blow air in around the seam.

Thank you and congratulation from Austria !!!!!!!

Awesome progress - even when you have standardised model or working foundation - trial and error has a key function in progression to the next stage - tweaking the mix more or less than a % per volume can certainly influence the final product more dramatically than predicted. Keep up the excellent work - will be good to have the finished product in sight 🙏🙏🙏

Exciting to follow this! Keep struggling, it's awesome! 💪🏻😊

I fucking love your videos man. So well presented, so clean, so cool

Truly the best content on the internet. BPS video days are the best.

you have come a looooong way, really impressive!

One day I too will know exactly what you mean in this video. Very exciting video. Just the type of videos which makes one feel awestruck.

The range safety officer made me static test at the away cell at Midwest Power years ago. The RSO's word is law, but I thought he was making a big deal out of a simple test. Spectacular one way or another. Your engineering regime is spot on, I have no doubts you'll put the Karman line behind you.

Don't forget to put mystery goo containers on the capsule so you can get enough science to get liquid fuel engines

This channel just keeps being amazing

I don't think I'm ever going to get over the name "Risky Batman". Like, I see you what you did there and I love it.

Awesome land shark!! Great content as well.

Some pretty darn cool stuff. Keep it up man

Excellent, I did smile at the mention of Rheology