Coming right along guys. Keep saying it. Justin is such an asset. So glad he came on full time.

God that feeling after doing your first few pulls after an intense build like this is indescribable. The stress, anxiety, adrenaline, and excitement mixed together is like a crazy drug I know I’m personally addicted to. The wife doesn’t get it, but you guys do!

What a cool build. I have a 79 C30 Dually camper special I use as a tow pig for the boat. I love the old square body GM trucks.

Just in time. Just got home. Time to roll up

@therealjplavoie

8 ай бұрын

Ditto brother!

@nickolds5538

8 ай бұрын

A burrito?

@zachfskipper

8 ай бұрын

That's disgusting.

@mistergarrett8175

8 ай бұрын

Relax your mind

@rockkhound943

8 ай бұрын

You know it

Extra heat sleeve on the turbo feed line will save the oil from preheating and actually help cool the turbo when things start glowing, an engine oil coolers gotta be on the list, loving the build so far guys 👌

I just have to say it. Justin is King when it comes to putting things together. Thank you for all the great content. Keep up the great work.

This is not a betrayal of Chevrolet to Dodge!!!!! Let’s all remember… Cummings Diesel engines have been around since the beginning of time. Great Diesel work JH and Justin, love this build!

@daddys_slow5oh

8 ай бұрын

Exactly Nissan has a Cummins powered truck😂

Looks like the build is all coming together and it’s awesome. Y’all should Cummins swap the ol military truck sitting back there as well that would be awesome to bring that ol girl back to life as well with all the original frame,body and drive train. Y’all keep up the good work God bless

Brother this is my favorite build on KZread right now! I love how excited you are about as would I! Can’t wait to see you rippin on this thang!

I have the same shifter setup in a few vehicles, I love it! When you go to shift to 3rd, give it a full squeeze before pushing forward into 3rd and it won’t allow you to money shit into neutral

Check out the military battery ends, You will Love Them! Hydrologic crimper that works best is the long handled hexagon crimper, they crush the ends into themselfs vs the Hobo Freight style that leaves wings crushing med ends on smaller gauge wires. Solder would be the ideal but crimping & waterproof shrink tube keeps them corrosion free. Fact it's what Geno's garage sells as an upgrade kit fully built.

Them new headlights are fire! They lit up the world. The truck is looking good. 😎✌️

Justin is a mad scientist and doer of all!

Awesome 😂little hazy behind it 😂love it thanks for sharing

this thing is sick cant wait to see the lmc parts

Love this truck! Turning out nice!

Love the positive energy from this channel keep it up :)

This is a bad ass build!

So far my favorite part of this is the fact that Justin got the bumper in the proper spot even with the bit of body lift from the chassis swap

Keep up the great work fellas 😎🤙 much love from Pennsylvania 🥳🇺🇲

JH and Justin y'all rock! Love the Cummins Chevy. Peace

very cool truck... get it sorted out and ultra cool

Absolutely awesome build bud.

Clean build!!! You got 2 paint it my boy!!

Love that seat cover! Got the same one in my bronco!!!

This is so absolutely sick!

Gonna be a ripper for sure! 🤙

Hey your channel is hella awesome man. We all appreciate your guys projects and sweet ass builds. He'll ya!

Nice Job Boy's can't wait to see the finish Truck 😊 you Guy's are AWESOME Keep up on Amazing Work Thanks for sharing !!!!!

I feel the same way in my 12v when jh is getting on it 👌

Respect to you and justin JH watching from the uk keep at it your killing it 💪💯👌🍺🍻😎

Now thats a bad ass truck!!

It's gonna shift hard being built. But I love it. Sweet truck.

Man I'd LOVE that frame under my 79 ¾ ton Sierra Grande

Haters be hating, glad you got the wolf in the sheep’s clothing! JHD!! Dodge life Car luv Brother’s.

Great content thanks for sharing

That’s gonna be a fun truck

looking good turning out nice you should get some of that Vice Grip Garage wipe on clear coat

I'm digging the cheodgey build.

Favorite truck on the channel!

Awesome to see it moving, It looks and sounds great! Hope you have a nicer wheel/Tire combo planned for it? It deserves it! #BuiltByBo

Always tack weld the pickup tube to the pump!

I love your videos. Keep going Builds. like this. And your channel will grow Brother

Sweet truck

That's the baddest Cummins camper I've ever seen!!

Hell yeah! 👍🤘👏 Those shifter’s definitely take some getting use to… Just have to train your brain lol. Slap it for 2nd, squeeze for 3rd and slap for 4th… lol

That thing is gonna be a menace 😂

Don't forget about the ignition switch on the column under the dash. They will act like a bad key tumbler

Its a ripper.. bad ass.. 🇺🇸🤘🤘🇺🇸

Them headlight are sweet

It’s really coming along, and I have had an old truck that made tons of noises and it was cool for a bit but after a while as a daily I had to add some sound deadening for daily use cause it was to much. And I think you got yourself a way cooler daily so I hope you add some and keep pushing the build. It really helps the channel and the viewers to have something to attach to like we do with Leroy, Mullet, mcFlurry, Ruby #wheresruby. So like Mr. Ron Burgundy I think it be awesome to have another vehicle to look forward too seeing progress and fun in. Maybe some drag and drives with it cause it’s got some power since it was a pull truck.

Not hating but i was welding pickup tubes over 20 years ago. Loving the content!

If a flaw'da prom queen was a truck.... this would be it!

Pretty cool

I’m calling it now it’s gunna be a giveaway truck can’t wait

Justin, you know you have to put 52s or 54s on that bad boy or 40s are old news We’re stepping up on the 50s now haha let’s go!

It would be awesome if you could find a steering column out of a manual truck

Call up VGG and get some shine juice on the paint.

You deserve so much more views then you get. You get all of my attention fs

Maybe dynomatt or equivalent the interior and or the firewall try to quiet some of that noise down

Looking good. It would have been nice to have a/c .

I wish Chevy would have put the cummins in their trucks back then. Dodge better be glad they put it in theirs or they might have tanked along time ago. Great work yall. It's lookin sweet and sounding good! Maybe a couple smoke stacks in the bed like a big rig? Would look sweet.

@Ilovegirlfights2

8 ай бұрын

Gm owned Detroit diesel which made the 6.2 so that would never have happened

Nitrous cleans smoke up real well

Friggin' badass u nit!

Now it just needs a square 80’s 90’s Dodge Grill

JH you have to let your boy Justin drive the truck he was so excited to see it run I figured you would swap half way and let him drive back. Awesome build though can’t wait to see it finished

Great vid as usual.🤘🤘 anyone else hear what sounds like a weird scream at 11:02 🤔🤔 maybe coyote

@cody39yrs

8 ай бұрын

Negative. I tried watching and listening a couple times but unable to hear anything over the diesel noise LOL

Man I wish we were closer to each other so I could line this thing up with the duramax k30 😂

Personal opinion she needs some cab lights and maybe a visor. Regardless love the build great work.

Smoke screen engaged 🤣

Can your guy do a video of the wiring? Ik they're everywhere but im sure he would do a killer job!

good team

M u favorite diesel and 4x4 channel!

Twin stack 😤

Lets go

That truvk is gonna be the nicest thing JH has isnt it lol jk its gonna be amazing man

I may need to offset the engine to the drivers side or maybe run an oval 5in exhaust to clear my stock AC box... maybe 4in even... any thoughts? Don't really want to go to an aftermarket AC since mine is perfect & will have a burb AC & heat for the crews. Oh you can swap the columns to an 89-91 & swap to a chevette wheel... same as the Zs. This will give you intermittent wipers & free up a place to mount a switch in the old wiper switch location. Have some Jeep steering shafts with the Ujoints on both ends that bolt right into our chevys but not sure they will bolt up to the dodge box or will it?

Need to put a manual truck steering column in it

Nice shipping crate. I like the old diesel engine too. That is a 12 value and not a 24 value, right?

Cummins swap the cucv next and do a off-road competition between them!

Get your selves a Winters gate shifter.

You should do a clean paint job since its gonna be a street truck

my tappet cover blew out on the first drive with my super duty swap lol

Needs some big mud tires

Ooo shizzzle

She definitely fueling a little heavy on boost.

You can come

So..did Garza survive the long fall from Leo’s bed?? I haven’t seen him appear in anyones vids sense that glamis incident 😂

How old is the brake master cylinder on that unit? Just had to replace mine, just a thought.

Damn JH you’re coming in like a big dix in a locker room, i’ve never been that guy, but I’ve seen that guy.

Sam needs to get the finger prints off😂

Looks like you need to call Same lol.

TROPHY TRUCK

Its about time for some diesel content

So the C in C20 is short for Cummins now.

You going to put the back brakes back on?

Need Sam to clean those windows for you

✌🏽😎

Who knew having a hood did so much

a little smokey hahaha