First Snow (ish) of 2023. But First, A Little Tweaking to Sunny the Sunstar.
Mail To: Zippo Varga PO Box 2323 Muncie, IN 47307 Email: ZippoVarga@gmail.com
Жүктеу.....
Пікірлер: 31
@mimimimi7979 Жыл бұрын
Perfection at best 🎉!!
@greenmule Жыл бұрын
Hello Zippo, I bet that Heat feels pretty Good after some snow plowing, just Rain and Mud down here, Good Video Zippo and Thanks, if I was up there I would be wearing that Stove out, thanks again see ya on the next one.
@TheNovaJohn Жыл бұрын
That was fun! I liked the quiet intro-I knew right away you were enjoying the new camera. Those machines add a nice look to the shop! Nice way to start the day. Thanks very much for the shout out!!!
@straightpipec6099 Жыл бұрын
Zippo is ready for the snow now. Very capable set up.
@wtbm123 Жыл бұрын
Cool
@donolshan8937 Жыл бұрын
Love your channel, I've got 2 sunstsars myself. You'll probably notice now that you've switched the lines. that the "down" action of the valve is a little quicker than the "up" side. This helps when you want to "clack" the blade on the ground to knock off stuck on snow from the blade. Keep it lit Zippo!
@arciefan Жыл бұрын
Too cold out for me lately. No snow but cold rains and snow in northern part of state. But on the brighter side, the days are now getting longer and can notice a difference on that. Hopefully only 6 more weeks or so , little less , little more. Nice video on the zippos and the two lines getting switched around.
@josephfine3394 Жыл бұрын
Good thing you fixed that blade-lift situation, Zippo; It's the little things that send a man to the madhouse!
@ZippoVarga
Жыл бұрын
You got that right!
@Dancing_Alone_wRentals Жыл бұрын
My idea of a perfect snow machine would be something like you have set up there...parked in front of the house where I can see it through the window. I'll be inside looking out at the snow falling, eating meatloaf out of the oven, maybe wearing those real thick socks and hanging out until the snow has melted away. Don't come knocking till you see grass start growing again.
@Turningwrenches85 Жыл бұрын
I'm glad zip that it was only simple as switching of the hydraulic hose it did a good job plowing that snow 🌨 as well
@ZippoVarga
Жыл бұрын
Me too! And yep! Plows quite well. Be Safe John! Zip~
@mr1pearl Жыл бұрын
Man the old Simplicity sure does get it done 👍 I shoveled some of the wettest snow ever I'm getting too old for this 💩
@davessmallenginerevival2847 Жыл бұрын
Hey Sean. We've been getting a lot of snow here. Some drifts were almost to much for my plow truck to go through. Take care my friend
@robertmailhos8159 Жыл бұрын
Snow removal time young man 👍😎 zippo got snow oh no 🥺😳
@almclean4835 Жыл бұрын
You get more snow than me. Happy new year
@boneyardgaragesmallenginer188 Жыл бұрын
I will have to go look him up. I’m from Long Island New York also. Nice video 👍🏻
@boneyardgaragesmallenginer188
Жыл бұрын
I can’t seem to find his channel. Maybe you can send me his link?
Hi love your videos. any idea of a simplicity 3212 points number ??? thanks
@ZippoVarga
Жыл бұрын
Email me and I'll send you the manual for your tractor and engine. Email is in Description of video. Cheers! Zip~
@kevincrall4369 Жыл бұрын
Hey Zippo, do you have any videos on how to remove the shifter rod on the 1958 Allis Chalmers simplicity Garden Mark
@kevincrall4369
Жыл бұрын
The bolt that tightens it down broke
@ZippoVarga
Жыл бұрын
There is a collar under the shift quadrant that the other end of the shift rod passes through as a guide. To remove the whole shift rod you need to take the 1/4-20 7/16" bolt off to drop the collar and allow the whole shifter to be removed. Of course, you also have to remove the dash tower bolts and lift it in order to allow the shift rod to clear the quadrant. Good Luck! Zip~
@WayOfTheMuslim Жыл бұрын
Hi, sorry to barge in on your video but I was wondering if you still have the round handle for your solid aluminum cane. I would be willing to pay for it or I have a never used Benchmade Griptilian Blue Class knife I would be willing to trade for it. I would first have to find out if it will fit the newer ones (I'll be buying one soon) that are made. The blade is 20cv steel. I would be willing to send it to you for inspection first.
@WayOfTheMuslim
Жыл бұрын
#CPM-20CV
@ZippoVarga
Жыл бұрын
Hi Rich. Do you mean the round door handle? Email me photos of the Benchmade and I'll reply with the handles I have. ZippoVarga at gmail . com
@AviationAviation Жыл бұрын
I would just like to ask Where you got your blue rent cheese from Cause i'm after some And I have got a zipper Lighter I can send you pal
@ZippoVarga
Жыл бұрын
A Subscriber sent it to me Mark. I couldn't tell you where it came from, sorry. I'd definitely proudly display it!! Thanks! Zip~
Пікірлер: 31
Perfection at best 🎉!!
Hello Zippo, I bet that Heat feels pretty Good after some snow plowing, just Rain and Mud down here, Good Video Zippo and Thanks, if I was up there I would be wearing that Stove out, thanks again see ya on the next one.
That was fun! I liked the quiet intro-I knew right away you were enjoying the new camera. Those machines add a nice look to the shop! Nice way to start the day. Thanks very much for the shout out!!!
Zippo is ready for the snow now. Very capable set up.
Cool
Love your channel, I've got 2 sunstsars myself. You'll probably notice now that you've switched the lines. that the "down" action of the valve is a little quicker than the "up" side. This helps when you want to "clack" the blade on the ground to knock off stuck on snow from the blade. Keep it lit Zippo!
Too cold out for me lately. No snow but cold rains and snow in northern part of state. But on the brighter side, the days are now getting longer and can notice a difference on that. Hopefully only 6 more weeks or so , little less , little more. Nice video on the zippos and the two lines getting switched around.
Good thing you fixed that blade-lift situation, Zippo; It's the little things that send a man to the madhouse!
@ZippoVarga
Жыл бұрын
You got that right!
My idea of a perfect snow machine would be something like you have set up there...parked in front of the house where I can see it through the window. I'll be inside looking out at the snow falling, eating meatloaf out of the oven, maybe wearing those real thick socks and hanging out until the snow has melted away. Don't come knocking till you see grass start growing again.
I'm glad zip that it was only simple as switching of the hydraulic hose it did a good job plowing that snow 🌨 as well
@ZippoVarga
Жыл бұрын
Me too! And yep! Plows quite well. Be Safe John! Zip~
Man the old Simplicity sure does get it done 👍 I shoveled some of the wettest snow ever I'm getting too old for this 💩
Hey Sean. We've been getting a lot of snow here. Some drifts were almost to much for my plow truck to go through. Take care my friend
Snow removal time young man 👍😎 zippo got snow oh no 🥺😳
You get more snow than me. Happy new year
I will have to go look him up. I’m from Long Island New York also. Nice video 👍🏻
@boneyardgaragesmallenginer188
Жыл бұрын
I can’t seem to find his channel. Maybe you can send me his link?
@ZippoVarga
Жыл бұрын
kzread.info/dash/bejne/nJarp5SHlpbQobw.html@@boneyardgaragesmallenginer188
@ZippoVarga
Жыл бұрын
It's Arch's Garage
@boneyardgaragesmallenginer188
Жыл бұрын
Cool thanks👍🏻
Hi love your videos. any idea of a simplicity 3212 points number ??? thanks
@ZippoVarga
Жыл бұрын
Email me and I'll send you the manual for your tractor and engine. Email is in Description of video. Cheers! Zip~
Hey Zippo, do you have any videos on how to remove the shifter rod on the 1958 Allis Chalmers simplicity Garden Mark
@kevincrall4369
Жыл бұрын
The bolt that tightens it down broke
@ZippoVarga
Жыл бұрын
There is a collar under the shift quadrant that the other end of the shift rod passes through as a guide. To remove the whole shift rod you need to take the 1/4-20 7/16" bolt off to drop the collar and allow the whole shifter to be removed. Of course, you also have to remove the dash tower bolts and lift it in order to allow the shift rod to clear the quadrant. Good Luck! Zip~
Hi, sorry to barge in on your video but I was wondering if you still have the round handle for your solid aluminum cane. I would be willing to pay for it or I have a never used Benchmade Griptilian Blue Class knife I would be willing to trade for it. I would first have to find out if it will fit the newer ones (I'll be buying one soon) that are made. The blade is 20cv steel. I would be willing to send it to you for inspection first.
@WayOfTheMuslim
Жыл бұрын
#CPM-20CV
@ZippoVarga
Жыл бұрын
Hi Rich. Do you mean the round door handle? Email me photos of the Benchmade and I'll reply with the handles I have. ZippoVarga at gmail . com
I would just like to ask Where you got your blue rent cheese from Cause i'm after some And I have got a zipper Lighter I can send you pal
@ZippoVarga
Жыл бұрын
A Subscriber sent it to me Mark. I couldn't tell you where it came from, sorry. I'd definitely proudly display it!! Thanks! Zip~