For details on the automatic smt feeder see docs.mgrl.de/maschine:pickand...
Жүктеу.....
Пікірлер: 28
@Choosen9996 жыл бұрын
Nice job!
@crazyduck1337
6 жыл бұрын
Wo kann man diese Maschine bestellen?
@olovskos81404 жыл бұрын
What are your Bottom Vision Pipeline Stages? Especially the lighting and capturing? Thx
@IceTurf5 жыл бұрын
So out of curiosity, how stable are those 3d printed Z axis heads? It looks stable in the video, but I admit I'm not sure if I believe it can be.
@petervanaken93375 жыл бұрын
...started to build one myself. Looking at the video it's promising. Are you still using it ? Any problems you've encountered during testing ?
@christandink95354 жыл бұрын
Is it possible to get the CAD file from you to add some change? For a university project we need feeders for 50mm profile.
@sergeduhautpas95906 жыл бұрын
Nais
@ingDemurtas4 жыл бұрын
what are the dimensions of the aluminium profile used? 80x40mm?
@subhasarkar88234 жыл бұрын
From where can I get the vacuum pickup nozzle ?
@metalosia91023 жыл бұрын
what is reduction ratio for N20 dc gear motor used on automatic feeder? there is from 40rpm up to 300rpm....
@stanislavefimov0 Жыл бұрын
Looks great ! I am very interested in making this automatic smt feeder, but I need the originals to change the fastening to install it directly on a wooden chipboard. Can i get them please! 👉👈
@Sh4dowHunter422 жыл бұрын
Do you have the BOM available still?
@crazyduck13376 жыл бұрын
N1
@nvhmechatronic51244 жыл бұрын
Can I replace the MKS Sbase v1.x 32 bit board MKS Gen v1.4 Reversing Board?
@ArieLash01
4 жыл бұрын
no not a good idea One runs smoothy the one runs Marlin
@robstoddard95215 жыл бұрын
Why is the up camera used with every passive that's placed? It pretty much doubles the amount of time the job takes.
@mgrl6042
5 жыл бұрын
To be sure everything is placed right because the machine was not 100% perfectly calibrated that time and because this was not in place: github.com/openpnp/openpnp/pull/804
@robstoddard9521
5 жыл бұрын
Well, that explains it. First OpenPnP job, anyway... Thank you for the quick response! Working on building my own machine, these things are good to know.
@gioraver4 жыл бұрын
Hi , do you have a email i dind't find it on your documentation page ^__^ , this is the best DYI feeder ;)
@IceTurf5 жыл бұрын
Part placement speed?
@mgrl6042
5 жыл бұрын
it's been 30.000 mm/min for this test
@thomashoppe64016 жыл бұрын
Will you publish design files for this machine?
@mgrl6042
5 жыл бұрын
you'll find it here: docs.mgrl.de/maschine:pickandplace
@mgrl6042
5 жыл бұрын
you will find all files here docs.mgrl.de/maschine:pickandplace
@habiks6 жыл бұрын
need more details and stl files :p
@mgrl6042
5 жыл бұрын
you find these here: docs.mgrl.de/maschine:pickandplace and in the officiall openpnp repos you find more information about the project as whole
Пікірлер: 28
Nice job!
@crazyduck1337
6 жыл бұрын
Wo kann man diese Maschine bestellen?
What are your Bottom Vision Pipeline Stages? Especially the lighting and capturing? Thx
So out of curiosity, how stable are those 3d printed Z axis heads? It looks stable in the video, but I admit I'm not sure if I believe it can be.
...started to build one myself. Looking at the video it's promising. Are you still using it ? Any problems you've encountered during testing ?
Is it possible to get the CAD file from you to add some change? For a university project we need feeders for 50mm profile.
Nais
what are the dimensions of the aluminium profile used? 80x40mm?
From where can I get the vacuum pickup nozzle ?
what is reduction ratio for N20 dc gear motor used on automatic feeder? there is from 40rpm up to 300rpm....
Looks great ! I am very interested in making this automatic smt feeder, but I need the originals to change the fastening to install it directly on a wooden chipboard. Can i get them please! 👉👈
Do you have the BOM available still?
N1
Can I replace the MKS Sbase v1.x 32 bit board MKS Gen v1.4 Reversing Board?
@ArieLash01
4 жыл бұрын
no not a good idea One runs smoothy the one runs Marlin
Why is the up camera used with every passive that's placed? It pretty much doubles the amount of time the job takes.
@mgrl6042
5 жыл бұрын
To be sure everything is placed right because the machine was not 100% perfectly calibrated that time and because this was not in place: github.com/openpnp/openpnp/pull/804
@robstoddard9521
5 жыл бұрын
Well, that explains it. First OpenPnP job, anyway... Thank you for the quick response! Working on building my own machine, these things are good to know.
Hi , do you have a email i dind't find it on your documentation page ^__^ , this is the best DYI feeder ;)
Part placement speed?
@mgrl6042
5 жыл бұрын
it's been 30.000 mm/min for this test
Will you publish design files for this machine?
@mgrl6042
5 жыл бұрын
you'll find it here: docs.mgrl.de/maschine:pickandplace
@mgrl6042
5 жыл бұрын
you will find all files here docs.mgrl.de/maschine:pickandplace
need more details and stl files :p
@mgrl6042
5 жыл бұрын
you find these here: docs.mgrl.de/maschine:pickandplace and in the officiall openpnp repos you find more information about the project as whole