FIRST FIRE Dodge Magnum 3.5l v6 STROKER, BIG CAMS, PORTED HEADS/Intake. Baby Hauler EP.8
Автокөліктер мен көлік құралдары
dodge magnum sxt first start of the 3.5l stroker, inertia Cams, Hand ported heads and intake manifolds. Hoping to make hemi horsepower out of this little v6. Follow the build by subscribing and check out the whole playlist on my channel under baby hauler build. Let me know if you think we should supercharge this dodge 3.5l or turbo this dodge 3.5l v6.
3.5l engine rebuild kit: amzn.to/3KGZ80y
Пікірлер: 196
Sounds like a turn of the century hit and miss engine at the beginning very cool respect for doing a v6
That V6 lope got me feeling a certain kinda way!
@RacingRamFam
3 жыл бұрын
Me too Man I’ve fallen in love with it 😝
@164hozey
2 жыл бұрын
Kinda sounds like a really bad rod knock
Straight up sounds like the 5.7 for sure without the cams, you couldn’t tell if this was 6 or v8 . I love it! Just bought a charger with a 2.7 for a project.
@andylevingston16
3 жыл бұрын
My car gets mistaken for a v8 and I only have a muffler delete, and reso delete
Man this inspired me to swap my 2.7l charger to the 3.5l an I’m going to do exactly what you did thank you for the inspiration.
@RacingRamFam
3 жыл бұрын
Yes do it!!!!
@mpetersen6
2 жыл бұрын
Send the Sludge-o-Matic to the bone yard.
@brandonpurple8938
2 жыл бұрын
2.7 are junk get rid of it as soon as possible lol
@husky3g
Жыл бұрын
@@mpetersen6 3.5L is bad for sludging also - people recommend you change the oil every 3000 over the 7500 that Dodge recommends. PCV valves go bad every 30K miles too.
Epic. I love seeing the 3.5 get love.
M90 supercharger bro. I will love to see how it's done. That will be a nice learning experience to follow your steps on that build.
This is my favorite channel
@RacingRamFam
3 жыл бұрын
Thank you. It really means a lot
Even though the O2s have the engine running in a rough state, it actually sounds pretty damn good. Can't wait to get my 3.5 swapped dune truck running.
Nice Doing this to mine. Idk how but I'll learn nice video!
Bro new subscriber to channel. I love the build to the 3.5 V6 magnum very informational💯💯💯. I have one and now it's time to work on her heart bro. Her body come together. Keep💪💪💪it
@RacingRamFam
3 жыл бұрын
Thanks man! This summer I’ll finish up the body work and see how fast the stroker does
@smokinmetalcarfun2292
3 жыл бұрын
@@RacingRamFam cool
Dope build!! What kind of shorty headers did u put on it? Ones that were designed for the 3.5l v6 magnum?
I just bought a magnum with a new trans and engine rebuild sxt
How do I do this to my v-6 Challenger? Sounds Amazing
So is it just the 3.5 block that you slapped the 4.0's crank, rods, and pistons in? The mains are all still the same?
I considered buying 300C which is burning oil and do almost exact thing and swap NAG1 later. I'm very intrested what numbers it puts out. Keep updating us! Cheers bro
@RacingRamFam
3 жыл бұрын
Will do man!!
@Joebobasshole
Жыл бұрын
Why swap out the nag1?
@basshead1116
Жыл бұрын
@@Joebobasshole early V6 came with the four speed auto
Have you considered an olds/pontiac 3800 supercharger for it ?
on the 3.5 intake where the power brake booster vacuum line plugs in, there is a smaller vacuum port. My vacuum line is broken off there and I don't know where it goes to. Do you know?
I have a 3.5 I need to do this
What year was the dodge nitro you took out the parts from?
Badass
@RacingRamFam
3 жыл бұрын
Thanks man
I’m have the same motor but I can’t find any kind of after market support what’s some good websites
Racing Ram Fam Sounds like your stuck in open loop!. Ect must be checked and AF ratio. One bank isn't open looping with the other. Check map pressure or gasket leaks
Nice! I have the 07 sxt 3.5 same headers high flow cats with duals h pipe and dual chamber super 10 Flowmaster single nozzle dry 100 hp shot nitrous and single turbo running around 4 lbs right now because I'm waiting to get my custom tune for my trinity t2 . haven't done anything internal but do want to do cam. Could you please tell me where you picked yours up at or if possible send me a link. You got an awesome build going bro you 've surely peeked my interest. I'll be following! Thanks in advance for any info you might be able to provide.
@RacingRamFam
3 жыл бұрын
Yes inertia Motorsports! Custom ground them
@matthewschuster4600
Жыл бұрын
Justin Id love to see your setup...
I had a dodge intrepid with that motor I turboed mine. the platform under the magnum is the same as the dodge intrepid just real wheel drive
@RacingRamFam
3 жыл бұрын
Pykris Burton this is awd so has nag1 and can handle a good amount of power!!
@barryismygod
3 жыл бұрын
RacingRamFam that’s awesome the LH/LX platform cars are awesome you can do a lot with them
@masyningles8667
3 жыл бұрын
That's pretty dope I'm interested in what kinda power that would make
@barryismygod
3 жыл бұрын
masyn ingles I was making like 320 on 7 pounds of boost
@RacingRamFam
3 жыл бұрын
What size turbo? Injectors?fuel? Map sensor?? Sorry all the questions just very interested
Have you worked out any of the kinks with the stroker motor? I think the stroker is pretty freaking awesome.
@RacingRamFam
3 жыл бұрын
Ya it runs good just doing body work to it
@djplunkett1421
3 жыл бұрын
@@RacingRamFam did the o2 sensors fix the hot and cold banks? Really love this build.
@RacingRamFam
3 жыл бұрын
Ya the one but the rest need to be replaced
Did you use the 4.0 short block? That would be so much easier than grinding main bearing caps. My 3.5 is getting tired and I would like to do something like this. The engine has been great to me
@elcochino8139
3 күн бұрын
My 3.5l 300 has 183000 miles and runs great!. I e replaced the waterpump and the timing chain. Other than that just basic maintenance. I wanna add a cold air intake and dual exhaust
Daaaaaaang!
@RacingRamFam
3 жыл бұрын
🔥
wish you could still find those cams for the 3.5 !
@RacingRamFam
Ай бұрын
I have a extra set I would be willing to sell
@larryframe6486
Ай бұрын
How much for the cam?
How much can I port the intake manifold on my 3.5L Chrysler 300?
Where you gone get the turbo/supercharger from? I got the same mods except for crank
@RacingRamFam
3 жыл бұрын
Build it myself! But going to leave it Na for now to many projects
I just ordered cams from inertia Motorsport for my 3.5l challenger. Anything you would recommend I change while I’m swapping out the cams? Rocker arms or anything. I’m also replacing head gaskets, head bolts, cam seals. Any advice would be appreciated. Thanks.
@RacingRamFam
3 жыл бұрын
Timing belt kit, rear camshaft gaskets there triangle in shape and rocker arms if yours has more than 100,000 miles on it
@scatsam7566
3 жыл бұрын
@@RacingRamFam I got the cams installed and I also installed some refurbished rocker arms. I think the rocker arms that I got are bad because I am hearing a lot of noise kinda like a Diesel engine. Do you think that could have something to do with the cams? Thanks for any help
muy interesante tengo un 300m especial estoy ajustando motor, en que medida quedaron los pistones? que biela utilizo para stroker? saludos. Francisco
@RacingRamFam
3 жыл бұрын
Yes it’s the same engine in a 300m and would work. And it’s the pistons and rods and crankshaft out of the 4.0l v6 engine
@sotaventodelis8977
3 жыл бұрын
@@RacingRamFam gracias. podrias decirme que cigueñal, piston, biela y arbol? saludos y muy buenos lo videos seguire viendo
1935 John deer Johnny popper sound
Dropped a 4.0 from a Pacifica into my 2010 Charger this month, nothing else, gained 4MPG..
@craiggerlach5548
Жыл бұрын
No more vids on this swap, how did it turn out, went to your playlist...
Now, to buy a charger with a 3.5 and make it sound like this!
is it possible to do this to my 2006 Chrysler Pacifica? it does have the 3.5 but can it work with it being transverse and all?
@RacingRamFam
3 жыл бұрын
Oh yes
Why does thus v6 sounds so good
@RacingRamFam
3 жыл бұрын
Big cams 👀👀
@RacingRamFam
3 жыл бұрын
And thank you
@maxcxt8372
3 жыл бұрын
@@RacingRamFam how’d you fit the 4.0 crank? Would you tune the revs to shift at 7k?
R u gonna put a turbo on it?
We're did you get your custom cams done looking for my 3.7l v6 dodge Dakota
@RacingRamFam
3 жыл бұрын
Interia Motorsports
After watching this , I'll stick with carburetors and vacuum gauges lot less bs and more time cruising.
@RacingRamFam
3 жыл бұрын
Huh lol
This is so cool, do you think you will get her on a dyno?
@RacingRamFam
3 жыл бұрын
Yes doing body work in it atm
it's been over a year do you have any updates on this bill? How are things going with the motor? Heckerino, How's the new addition to the Family! Also, did you ever find out WHY it was running rich?
@RacingRamFam
3 жыл бұрын
No just been sitting in the garage kinda got lost in other projects and life! Extremely busy life atm
@bryansan14
3 жыл бұрын
@@RacingRamFam bummer
What pistons you got?? I have a nitro rt 4.0 and the duration was too long
@RacingRamFam
3 жыл бұрын
For? There stock pistons out of 4.0
What are the specs for the cams and where did you get them from?
@RacingRamFam
3 жыл бұрын
Inertia Motorsports
Dyno numbers ?
The Dodge Nitro has 4.0 V6 block is the same as the 3.5 I would swap it with my 3.5 charger
@RacingRamFam
Жыл бұрын
Yes
Have an 07 Magnum V6 awd that would like to get something like this done. Do you just work on your cars? Or is it a shop?
@RacingRamFam
3 жыл бұрын
Just do it to my own cars! But was a very easy build to doo
@miguelmoreno543
3 жыл бұрын
RacingRamFam any chance you could share what you had any machine shop work done to the block and heads? Or what needs to be done to get the same results? Would greatly appreciate it! Car has been sitting for about a year now and really want to get it back on the road. Fell in love with your build
@RacingRamFam
3 жыл бұрын
Ya I did all the machine work at my shop. Polished crank, rebuilt heads and went through whole engine here’s the full playlist of everything I’ve done kzread.info/head/PLeEwppcCDh6atJPYqE1WcnBNQYtORRw2- if there’s something I’ve missed let me know and I’ll try and cover it in a future video
Twin turbos and supercharger from Chrysler crossfire,also would parts from 3.2 srt6 fit 3.5.?
@RacingRamFam
3 жыл бұрын
No they would not
@atx-cvpi_99
10 ай бұрын
The 3.2 is actually a Mercedes Benz engine.
Headers?
Man please tell me you gonna upload more content on the magnum please I need to see where this goes
@RacingRamFam
3 жыл бұрын
Here’s all the videos on the magnum kzread.info/head/PLeEwppcCDh6atJPYqE1WcnBNQYtORRw2-
i am trying to stroke my 2010 charger sxt, also a 3.5. any help!??
@RacingRamFam
3 жыл бұрын
Yes go get a junkyard 4.0 out of mini van or nitro check the video out here kzread.info/dash/bejne/ZGik1dOYgJfIgLw.html
Engine install in sandals
Would like to speak with you like that a Dodge Charger I'm looking to do the same thing to you I'd like to get some input please let me know thank you
I need your help on doing the same thing to mines
@RacingRamFam
3 жыл бұрын
Do it not hard!
Me and my dad have actually been talking about Turing my 3.5 to a 4.0! Do you recommend short or long tube headers? And where did you get the cams I can’t find them anywhere!
@RacingRamFam
3 жыл бұрын
Interia Motorsports I got the custom cams from! And I could not find long tubes so I had to go with shorties
@v6bullet662
3 жыл бұрын
@@RacingRamFam if you need long tubes for a 3.5 im not sure if they fit the 4.0 bbk performance has some one’s I was looking into!
@RacingRamFam
3 жыл бұрын
The 4.0 same height and everything as the 3.5 so they should fit!
@v6bullet662
3 жыл бұрын
@@RacingRamFam yeah they’re really nice if you want to check them out!
@RacingRamFam
3 жыл бұрын
Ya I should!
Anyone use the inertia v 1.2 cams for the 2008 charger 3.5l?
@RacingRamFam
2 жыл бұрын
Yes
What code reader are you using?
@QwertyQwerty-jq3cu
Жыл бұрын
It an OTC Genysis EVO. There are several versions. You only want 3.0 or higher. Probably newer versions s out now. They are very slow to load, like 5 minutes. Then if you shut them off wrong, it take take 30 minutes to restart them. If you want live stream data, most any newer better quality scanner has that capability. There are phone apps with external dongles that will do the same thing for a reasonable cost.
When you putting her on the Dyno?
@RacingRamFam
3 жыл бұрын
Idk any awd dynos around here
4.0+8spd is my plan
@RacingRamFam
3 жыл бұрын
That be pretty cool!
where may one find online and purchase stroker kit for Pentastar V6 engines??
@RacingRamFam
Жыл бұрын
Idk on the 3.6
@matthewschuster4600
Жыл бұрын
Totally different animal my guy... Lmfao.
Please supercharge this car. Will build along with you
@RacingRamFam
3 жыл бұрын
Send money lol 😂
What kinda numbers is she putting down? Know the times?
@RacingRamFam
3 жыл бұрын
Idk yet haven’t hit the dyno. Cars in my shop getting body work done
We’re did you send your cams? I’m a 3.5 junky. And have a couple complete motors. And a couple half motors. And now this week a 4.0 complete block! Thanks btw. But I already have these cams boxed please a number a address or a spec sheet something.
@RacingRamFam
Жыл бұрын
I’ll sell you mine and you give me yours as a core charge
@Joebobasshole
Жыл бұрын
@@RacingRamFam price?
@RacingRamFam
Жыл бұрын
@@Joebobasshole $2500
@Joebobasshole
Жыл бұрын
@@RacingRamFam I’ll pass on that I can get a big block for that price. Great content though love the Chanel and you have my support! Maybe I’ll film my build and the car. I wanna beat up on as many 8 bangers as I can with my hell kitten. Lol oh and quick question what the hell was the 4.0 available in? I know of the 3.3 3.5 3.8 all on the same block design. But never heard of a 4.0?
Twin hair dryers will put out more power😁
@RacingRamFam
3 жыл бұрын
Big facts
What size piston did you put in him?
@matthewschuster4600
Жыл бұрын
Its the Piston out of the 4.0L junkyard engine out of a Dodge caravan RT..., Absolutely Brilliant.
Is this the same 3.5 out of the 2010 Sebring?
@RacingRamFam
3 жыл бұрын
Yes
@EJPookie
3 жыл бұрын
@@RacingRamFam that’s awesome I thought so, you got any good Boltons for it you run?
@RacingRamFam
3 жыл бұрын
Shorty headers, throttle body that’s about it for bolt on
That Magnum sounds like a crappy Massey Ferguson lol or an old steam engine , brutalll
@jimpage4129
Жыл бұрын
Are you sure it’s not an 1881 Westinghouse traction engine
Any update on this?:)
@RacingRamFam
2 жыл бұрын
Ya coming back very soln
@qwertyword
2 жыл бұрын
@@RacingRamFam awesome. I've been working on a 66 belvedere.. I was going to do a turbo magnum but lately I've been interested in something weird like an srt4 motor or turbo 3.5l.
@RacingRamFam
2 жыл бұрын
Turbo 3.5l 😎
Sounds like she running on 2 cylinders
@RacingRamFam
3 жыл бұрын
All 6 for sure.
Wussup bro what state you in?? I got this 2006 srt10 with only 70k miles i need it tuned i need some advice on how to make my bitch mean
@el_jaliskillo4417
3 жыл бұрын
Hit me up asap with some tips
@RacingRamFam
3 жыл бұрын
Mn
@el_jaliskillo4417
3 жыл бұрын
I dont know what nm is ?? Is that new mexico? . I was expecting alil more than just 2 letters.
@RacingRamFam
3 жыл бұрын
Juanito Blaze Minnesota
Your cam overlap is screwing up your computer
Why didn't you just 4.0 swap it?
@RacingRamFam
3 жыл бұрын
Well I pretty much did
@DetonatorYellow
3 жыл бұрын
@@RacingRamFam got me there lol
@RacingRamFam
3 жыл бұрын
Lol ya the 3.5 block was pretty trashed and the 4.0 block was like brand new no bore tapper or nothing
@fredgreenhill2894
3 жыл бұрын
I'm a OG Mechanic from DETROIT...I done over ten 4.0 swapps....10years ago....I could OUT RUN the 3.6 5spd 2011-12 all day....SO MUCH BOTTOM END TORQUE DOWN LOW
Turbo it
The lifters in the heads sound bad
Just tune it buddy
@RacingRamFam
3 жыл бұрын
Soon
It kind of sounds like a rod knock not a cam loop
@RacingRamFam
2 жыл бұрын
I guess if you think it sounds like that lol def not a rod knock tho
@willwills100
2 жыл бұрын
I'm sure its not its either my phone or just the video but anyway I'm looking for a cam for my 1999 v6 3.5l plymouth prowler do you know anywhere I can get one
@RacingRamFam
2 жыл бұрын
@@willwills100 Inertia motorsports
@willwills100
2 жыл бұрын
Thanks
@willwills100
2 жыл бұрын
Where did you get the header for the baby hauler and how much every place I've seen want like 1500 stupid high
Sounds like v8
@RacingRamFam
3 жыл бұрын
I think more like a Harley
@cobi4967
3 жыл бұрын
@@RacingRamFam are you gonna do more videos on it??
@RacingRamFam
3 жыл бұрын
@@cobi4967 ya this summer I have body work to finish than your
Sounds like 💩