FINALE VIDEO!! E36 N54 Swap Was Sooo Worth It!!!
Автокөліктер мен көлік құралдары
What an amazing experience to have completed my most challenging, yet rewarding engine swap of my career! So many thanks to the sponsors who helped me complete this project.
www.kasselperformance.com - Thank you, Jim!
www.garagistic.com - Thank you, Matt!
I look forward to working with you on my future projects!!!
Antunes - Thank you
And without a doubt my customer and friend Ben Watson who gave me this very unique opportunity to get my foot back in the door with a project that stretched my intellect, capability, and patience. It was all worth it in the end. I am a better engineer, integrator, and enthusiast. This allows me to further do what I love and enhance the capability of the enthusiast community. You are the ambassador of quan! Thank you, Ben!
Thank you to my loyal youtube subscribers - you know who you are. you like, comment, and have told your friends. For that I am thankful and hope to continue to grow and provide you more challenging and crazy BMW-related projects!!!!
Thank you to www.bensound.com for the music.
The BMW N54 Integrators Guide, tailored specifically to the E36 Chassis is coming out this October! Thank you to everyone for your support so I can continue to keep providing quality content.
For more information about what I do and who I am, visit:
www.garageaholic.build
E30 M30, M60, M62/S62 Swap Guides are currently available for purchase!
garageaholic.build/products
Пікірлер: 621
Such a great journey it has been. Enjoyed every bit of it. Give Frank the praise he deserves for busting his ass for all of us!!
@jayboss7611
4 жыл бұрын
Watch this vid great job .love it keep the vids coming my brother BMW
@Garageaholic
4 жыл бұрын
Thanks Jay!
@ardaaltinsoy5923
3 жыл бұрын
are you selling that cars ?
We need a E46 N54 👍 up next
@loucacevic9435
4 жыл бұрын
B58 would be better , those engines are far better than n54s
@SamAbraham
4 жыл бұрын
Lou Cacevic Yeah, finally seems like a solid successor to the N54. Only issue now is price lol
@loucacevic9435
4 жыл бұрын
@@SamAbraham price of the engine is high now but cars are not too high on price 2016 and up models got the b58s
@SamAbraham
4 жыл бұрын
Lou Cacevic true, but even a salvage F30 340 would probably be considerably more than a salvage E90 335, if someone’s concerned about cost I guess
@mike_oe
4 жыл бұрын
Yes, please!!! And if you do it on a coupe, I'll happily buy it afterwards.
How am I just now hearing about this? That's a build well done.
@Garageaholic
4 жыл бұрын
Those are the comments I like to hear!
I bet those 5 dislikes are for you blasting music over the exhaust note, which was pretty lame. Other than that, pretty damn cool. Now do an S65 motor into and E46 M3.
@Garageaholic
4 жыл бұрын
Point Taken! That and gum chewing! LOL
@razh260
4 жыл бұрын
I was going crazy at that point
@MrSpaz12
4 жыл бұрын
@@Garageaholic But seriously, what you did was way cool and you sharing the info equally as cool. You just gotta love the BMW community, there's nothing like it as far as sharing info. And of course the obvious; the cars really are the ultimate driving machine.
@tylercouture216
4 жыл бұрын
No please dont put that in a e46 any other motor though
the e36 is so beautiful. everything you habe done seems perfect. respect to the work ❤️
Congrats on finishing the e36 N54 marathon. The new customer clearly loves the outcome. I enjoyed the clean build, the details you were focussing on and the growing crowd that followed you. Thx for sharing it with us.
@y0Special
4 жыл бұрын
E36 man
@BerlinThunder1
4 жыл бұрын
my bad. changed it.👍
Guys, awesome video and explanation. Looks like a great swap although the coding seems a bit daunting. We’ll certainly consider an N54 for future swaps after watching this video.
@Garageaholic
4 жыл бұрын
Thank you! Car is getting fine tune coded by Kassel currently!
Discovered this channel and binge watched the E36 N54 series. This channel deserves way more subs.
@Garageaholic
4 жыл бұрын
Thank you!! I guess I just need to keep creating content and see what happens! Tell your friends I guess, because I aint stopping anytime soon!
@eurosquirrel
4 жыл бұрын
Way more subs. Agreed!
@rtradu
4 жыл бұрын
wayyyyy more
@thatreviewguy6109
4 жыл бұрын
@@Garageaholic I looked at the amount of subs you got and my jaw dropped. Some youtubers with 500k dont post this great of content. You can tell alot of work has gone into this channel. Thank you for all the great content!
@Garageaholic
4 жыл бұрын
@@thatreviewguy6109 Wow. Very well thought out comment. Thank you very much for the booster. Hope to continue helping the community!!
Congrats on building something truly epic! Amazing stuff I love it
@Garageaholic
4 жыл бұрын
Thank you for that. Love the fuel!
Whole progress looks lit man! Loving the whole thing! The length of your work put into this is incredible!
I think you’re one of the first to actually successfully swap a N54 into a E36 with all the hassle of the wiring. I’ve seen a lot of threads online where people get caught up in the wiring and sell their projects. This is one of the first super documented swaps I’ve seen.
@Garageaholic
4 жыл бұрын
Thank you very much for recognizing that! I hope you learned something from this. Now on to e30 chassis!
@natasunknow240
Жыл бұрын
@Garageaholic hay man I have a buddy that wants to do this swap I'm just now finding your page & of course I sent it to him ASAP...lol My buddy is stuck on the wiring... how do I find that info & part's
@Garageaholic
Жыл бұрын
Check out my website garageaholic.build, and you can first download free snippets of the guide and if you like it you can download the entire guide. The wiring section alone is over 100 pages of detail
Holy f... great job. Congratz on the final build!
Wonderful job Frank! Have never been more motivated to do something like this myself! Hoping that kassel DME flash becomes available to the public so we can bypass CAN! Kudos for being a literal pioneer and making it readily available for everyone else! Onto my binge-watching tour of your next series ahaha
Great KZread recommendation! My favourite 3-Series gen...love the E36! Top work!
Awesome project!!! Love it. Great vídeo as well. Congratulations
Nice man, been watching on the forums. Awesome to see it finished!
Congrats on completing an awesome project! Looking forward to that e30 touring!
@Garageaholic
4 жыл бұрын
Heck yeah thanks for your interest!!
Seriously cool. Can't wait to see that e30 touring done!
Great content man. Wish you all best!
@Garageaholic
4 жыл бұрын
Thanks for standing by me as I work through this!
Great job on the build. Thanks for documenting the process
@Garageaholic
4 жыл бұрын
You're very welcome. Hope this helps motivate/educate you in whatever way possible!
Awesomeness! Can't wait for the e30! Keep up the great work
Wonderful job. Iwill wait your next video
wow, absolutely amazing work guys.
Wow amazing work. Wish i had your patients to do this.
Great job love how you did this swap real clean and precise. I would love to come see this in person
@Garageaholic
4 жыл бұрын
You let me know, The shop is in upstate NY!
Such an awesome build, i would love to do this to my e36 M3. Thanks for the video :)
Well done gbalz, very well done
Amazing and incredibly beautiful work frank 😮💨🙌
Great swap. Very clean. Keep up the great work.👍🏻
@Garageaholic
4 жыл бұрын
Thanks Joe
Great job finishing the e36! The n54 touring swap has got me excited. Seems much more powerful, and cheaper than the s54 swaps. Can't wait for the videos and writeup. Finally something specific (IN ENGLISH) for exactly my car.
@Garageaholic
4 жыл бұрын
Hey! Happy to help Petar. Next project intro video coming out on Saturday!
Great example of passion and persistence. That evo steering wheel, contours, and those alpinas on the e30...wonderful. Maybe a Motorsport trim piece over the glovebox with a custom engraving. Great job!
@Garageaholic
4 жыл бұрын
Thanks for that! Yeah we’ll see what Ben does!
Cool build! Nice to see an E36 with something other than an LS swap. E30 wagon!! Long live the long roofs!!
@Garageaholic
4 жыл бұрын
Hahah thanks for the comment man!!
WOW!!!! Glad I just stumbled on to your channel. Epic swap!!!
@Garageaholic
4 жыл бұрын
Thanks more to come!!
you definitely deserve more subs your work is awesome man keep it up. its my dream to be able to do stuff like this for a living
Amazing video got e36 1995 328 manual convertible also building e30 325 1986 2 door full restoration can't wait to see video of that next build !!
Hope this becomes more supported soon by the general industry to make the swap more simplified!
COOLEST DUDE EVER!!!!!! MUCH LOVE, MAD RESPECT
I shudder to think what the total cost would of been if you charged labour by the hour... Outstanding work. Blows my mind
Awesome work Frank!
I want to see how reasonable it would be in a E46 would love to see that !
@papa_pt
4 жыл бұрын
I think someone is doing an e46 wagon rn
@jd7896
4 жыл бұрын
This... So much. An E46 with an N54 would be absolutely fantastic.
@danielzychniewicz2633
4 жыл бұрын
There is one on KZread.
I'm so excited about your projects! Please do an N54 or S54 swap in a E39! :)
@jamesgoussanou
4 жыл бұрын
Yes yes yes
Well done guys, great job 👍👍
Ahhhhh so stoked for this E30 touring project next, instant subscribe lol. Post these projects up on the N54 facebook group, instagram and the message boards!
@Garageaholic
4 жыл бұрын
I thought I did which ones am I missing!? Let me know!!
@realbadtech9318
4 жыл бұрын
@@Garageaholic I posted it up on the N54/N55 tuning facebook group. Theres also an N55 group, general BMW groups, plus all of the E36 groups like E36 World
What an incredible build! Really. I like the mission statement on the website which tells it like it is. When I see this crashed E92 I don't understand how the owner could have just sold it off and not repaired it BUT I'm much more happy that our wonderful host on this channel took said engine out of that crashed E92 and used it for all of our benefit! THANK YOU! I have a 2002 330CI swapped out with the entire drive train and interior suspension etc from a 2006 M3 Competition. However even though the drive train has fairly low mileage as of now the Chassis has 68350 Miles on it and the Vanos has been done catless headers have been installed and It runs like a deer. (It's an old person thing sorry) the chassis which now has over about 250,000 Miles on it and a few more years of salt and mud (which I did the rear subframe plates and all of the bushings) is not happy. The previous owner had decided to Plasti Dip the car white a few years before I bought it. Having seen a few tiny bubbles in the paint before he did this he scratched the paint away down to the bare metal right at the rear quarter panel where it meets the lower half and left it. This was of course covered up by the plasti Dip so it wasn't even noticeable when I bought the car. One day I decided to remove the PD (which actually took me over a week to do because he had not put enough of it on to make it peel-able so I was in a PD he11 lol) it was then that I saw the now rusted area of the rear quarter panel. It wasn't too bad I thought and I didn't rush to fix it so it wasn't even looked at for two more years because I just did the cosmetic temp fix of filler, paint and clear. It was after I decided to fix it right that I now find myself facing bigger decisions about what to do next. I opened up that quarter and it had eaten away the entire insides of the car on that side so much that the quarter has a two foot by three inch hole in it and all the way into the trunk! So to make a long story longer I am thinking about putting all the great drive train into an E30 or well I just don''t know. So thank you for the great inspiring videos!!! I am very hopeful now! Sorry for the long boring comment.
This video earned a very well deserved sub. Great project man keep this content up👍
@Garageaholic
4 жыл бұрын
Thanks again man!
AMAZING JOB. plus interesting to notice how old BMW s look so much better than those of the 2000 era and today
Congrats, good job. Enjoy with it
@Garageaholic
4 жыл бұрын
Thank you Kete!
Sweet well done, can't wait for the e46 shasie !!
@Garageaholic
3 жыл бұрын
Maybe - see what project falls in my lap!
I want to do this to my 96 318ti so bad great build love it
Fricken awesome man !!
Congrats Frank again, this is one of the most ambitious car project I have ever seen. Your videos were great, always accompanying my lunchtime at work. Clear, concise instructions and a very friendly face. I don't understand how you managed to do this while still having a dayjob AND writing the GUIDE??? What the hell where did you find the time? I will buy it and I will do this, and will always give you credit in my videos. Keep it up! and THANK YOU!
@Garageaholic
4 жыл бұрын
Thanks Etienne. Wish we could have met. Maybe another time soon! I look forward to it. You are a loyal fan. I appreciate that. Let's meet up one day at some show in Syracuse, Buffalo, Rochester....whatever is in between us!
dude literally done everything bro like just water pump, alt pws , you good
Cannot wait to do this! What is the difficulty level with the swap guide? And would the mhd tuner help the cat less downpipe issue?
This video popped up on my recommended and I’m glad it did. Subscribed and can’t wait to see the e30 n54 swap!!
@Garageaholic
4 жыл бұрын
Thanks man!!!! Appreciate that
Nice!!!! Great videos👌
king of bmw swap soo far ive seen all over videos but no one compares to you god bless you for the good job ur doing for us thank you
@Garageaholic
3 жыл бұрын
Thank you so much for that! So glad to hear it from a fan!
Subscribed! This is awesome
FANTASTIC , did u do a remap or stock map ?
Amazing build man!!
What a beauty. I want a e92 335i with the n54 but gas is to high right now plus i plan on swapping the twin turbos to a single. One of these days.
Awesome job 👏
Amazing! An e39 n54 engine would be unique :))
OMG I LOVE THIS YOU GUYS ARE AWESOME!!!!
Congratulations and I am excited for that wagon project. Ultimate sleeper driving machine.
@Garageaholic
3 жыл бұрын
You and me both!
@WarriorsPhoto
3 жыл бұрын
@@Garageaholic Has it been started?
@Garageaholic
3 жыл бұрын
See my e30 n54 finale video.
@WarriorsPhoto
3 жыл бұрын
@@Garageaholic I love ❤️ it. Such a promoter you are 😉.
This is so sick!
You sir are a modern day magician. Huge respect to you.
@Garageaholic
4 жыл бұрын
Hey tHanks man!!
Fair play that is a great build 👍👍👍👍
Great vid, I'm subbed!
You did a hell ever job on that built💯💯💯 awesome, is there one for E30 N52 or N54,, i will be waiting, thanks again.
@Garageaholic
15 күн бұрын
Hi and yes, we also did a black E30 Wagon N54, Check out our playlists!
That's so cool guys. I'm doing M30B30 swap in my E21 and it's a bit tough. I saw you have an E21 in the garage as well. Have you done swaps to it?
WELL DONE GUYS!
Guys, respect to the work!
@Garageaholic
3 жыл бұрын
Yeeeeeah!!
U a god damn legend. Jst watched ur e30 touring n54 swop
@Garageaholic
3 жыл бұрын
Thank you!
Definitely do an E46! I know of a sulev with a bad fuel pump up for grabs. Would it work? 👍👍
Great swap! Easy way to get around inspection is do it in an OBD1 car. Up here in NY it's a visual inspection only. Running into this issue with trying to make an N54 or an M57 pass inspection in an E39 wagon...OBD2 presents some challenges.
@Garageaholic
4 жыл бұрын
Dude you said it. We should have thought about that before buying this m3. But here we are and now we’re learning for the betterment of the community.
@matthewromano8801
4 жыл бұрын
@@Garageaholic watching the rest of your series now. Whereabouts are you located?
Awesome work
Damn that is sick. I think an N54 swapped e36 might be better than turbo’ing the m5x/s5x motor. I think it’s be expensive to replicate the strength, resilience, power potential and how power comes on with the N54 with a m5x/s5x
@onesikm3
Жыл бұрын
No way! The n54 was a mistake of an engine. Cars were all going turbo at that time and they had a ton of open deck n52 laying around and they just sent it with a turbo and called it the n54. Hence why I think they had so many failures since the engines foundation wasn’t originally designed around boost?1?’l
@Garageaholic
Жыл бұрын
….and went with forged internals as an upgrade? Doesn’t make sense. The n54 was well thought out, the implementation was the problem. It’s a good engine if you keep up with the maintenance
Hi This was so interesting. Do you have any information on swapping the M5, v10 engine into the e36 chassis.?
Absolutely amazing
i noticed the county the plates are in. I would love to get into doing things like this and live not far from there. Do you think there is any way i could come up and see what you guys do? i have done a lot of work with repairing e46's and love every min of it!!!
E46 N54 swap next! Great work
Epic swap! I've toyed with the thought of swapping an n54/n55 into an e30 but I'm sure it's a blast in the e36!
@PhyteByte
4 жыл бұрын
E30 won't clear.. too high then the exhaust collectors on the N engines is weird
@Garageaholic
4 жыл бұрын
What do you mean?
@PhyteByte
4 жыл бұрын
@@Garageaholic will it work?
Great!!! Now do an Integrated e30 guide ill pre-order it.
Great job, I Love it
This is awesome!!!!
dude you have seriously inspired me to do this great work! I got a 335i sitting with every part needed..just need the e36 lol..can it be done with a 318?
Jim is a great guy!
Love the vid and all the hard work you did but my m52 e36 spins the tires about that much lol. Cheers 🍻
What differential did you install? Just ordinary should break at abruptly start.
Love you videos and am doing a swap on my 2011 135i from a n55 to a n54 because they are more available and affordable but am having wiring issue I hope you see this and are able to get back to me you wiring cas3 video on this e36 helped me out a bit but just looking for more help to guide me cause finding good usable info for a swap like this is hard wire/connect diagrams etc
Dude you‘re winning at this!!
@Garageaholic
4 жыл бұрын
I’m really really trying!
@becomematrix
4 жыл бұрын
Garageaholic🙌🏼🙌🏼🙌🏼🙌🏼
Nice project !
Big RESPECT Man! You built many BMW lovers favorite car 😊😊
Nice job bro
I just realized its a 4 door and your in Tennessee both things that i like , but its a 4 door though i love sedans
Beautiful E30 touring. Wow you have done a lot. I do all kinds of BMW engine swaps. I have been working on them for over 25 years. You have done a super clean install. I’m looking forward to reading your guide coming out. There’s more than 1 way to skin a cat. I wanna see how you did everything compared to how I do them. Great thing you have done for the BMW enthusiast community. If I ever blow the engine in my 04 M3 I will be sticking a n54 single turbo conversion in there. It will be cheaper and more powerful. Get a pressure bleeder they are around $40 makes bleeding any hydraulic system a 1 person job and it’s way quicker than pumping. I bought my first one over 20 years ago and fell in love with the ease of use. The vacuum bleeders suck. I bought one and it doesn’t work as good as the pressure bleeder
@Garageaholic
4 жыл бұрын
Very cool! Yeah this e30n54 touring will be a lot different. I plan to learn even more by taking a different angle for this swap as well. Hopefully providing the community with her another avenue if they so choose
@rbmwiv
4 жыл бұрын
Garageaholic if you ever need anything BMW related let me know. Do you have ETK and TIS and WDS? 3 different bmw programs that run on Windows. WDS has the wiring diagrams for every bmw from 1980-e36. On one set of disk and there’s a 3rd dvd that’s got all the late model cars on it. Etk is the electronic parts catalogue and has every BMW with exploded views of everything. Has every last nut and bolt along with quantity and interchangeable. You can see every BMW that has that part. Lastly is tis with a bunch of tech documents with repair instructions.
wow subbed. cant wait to see the touring. yt finally hit me with some good algorithmzz
@Garageaholic
4 жыл бұрын
Thanks buddy! More to come after I release this guide!
Hello, I need you came to Portugal do a workshop about this. I love the E36. I have one E36 328i 😎
CONGRATULATIONS, Frank! Seeing this completed N54 swap gives me so much joy. I never thought it was going to be possible until I stumbled upon your channel. Keep up the fantastic work, and I can't wait to see what other projects you roll out! ps: have you considered starting a patreon or merch shop? I spied your Garageaholic tee and I would love to get one to support you. This channel has so much potential.
@Garageaholic
4 жыл бұрын
Thank you. I took all your comments to heart. Loved the constructive criticism. It's helped me be better at what I do!
i would spend money on a full harness and ecu kit that fits under the hood. good work guys!
@Garageaholic
4 жыл бұрын
Hey Alex Good comment and thanks for being a longtime subscriber. We worked with Kassel Performance to devise a standalone solution, which is great news for the community. Combined with our N54 integrators guide and most anyone can do this swap!