File work on a knife

Тәжірибелік нұсқаулар және стиль

Just a quick video how I do my file work

Пікірлер: 101

  • @K3Flyguy
    @K3Flyguy4 жыл бұрын

    One of the best videos on vine work! Good camera work, editing, and no annoying music! Thank you for your time, skill, and knowledge! I subscribed!!!

  • @edgarmiears5992
    @edgarmiears59923 жыл бұрын

    I love watching you work, very detailed on your filings.

  • @GunnySGT1911
    @GunnySGT19118 жыл бұрын

    I've seen so many knife makers that seem to think they need to make a very tight vine pattern. To me, it looks cramped and over worked. You pattern is spaced out more and has a much more natural look to it. It's more elegant for being "less". Great job. Looking forward to starting to do some file work on my knives.

  • @ericday604
    @ericday6048 жыл бұрын

    Beautiful job, and thanks for the lesson. Now to grab a piece of scrap and practice!

  • @rcwarship
    @rcwarship8 жыл бұрын

    Thank you very much for sharing your skills, I've been wondering how to do this & now know that it is something within my skill set. Awesome! Thanks Again & Best Regards, Jon

  • @fourKeeps2020
    @fourKeeps20208 жыл бұрын

    Thanks. Just about to give it a go for the first time. Very helpful video

  • @scottmccarroll2618
    @scottmccarroll26189 жыл бұрын

    Wow your vine work is some of the best I've seen and your instructional vid is really well done clear and great camera shots you taught me more in this one vid than all the others I've seen thanks for sharing you talent AussieScott

  • @ElioGuida
    @ElioGuida9 жыл бұрын

    awesome work dude! that thorn file is stunning. very well done!

  • @Cropslx1
    @Cropslx17 жыл бұрын

    Beautiful work!

  • @jstef928
    @jstef9288 жыл бұрын

    Damn that's beautiful work.

  • @warpighammer3760
    @warpighammer37607 жыл бұрын

    Devil in the details . Damn fine work .

  • @SaintBigAl
    @SaintBigAl5 жыл бұрын

    very nice file work.thanks

  • @MABUCORP1020
    @MABUCORP10208 жыл бұрын

    Beautiful design!

  • @rammsteinsiegfried6750
    @rammsteinsiegfried67507 жыл бұрын

    nice work and very beautiful pattern.Thanks for video.

  • @tiedemann8225
    @tiedemann82258 жыл бұрын

    Very nice. I am gone try this on a knife that i work on now. Thanks for sharing.

  • @roncrandall
    @roncrandall5 жыл бұрын

    Love that pattern. Thanks for that. I'm going to use that on a cleaver that I'm making for my dad.

  • @2manysigns
    @2manysigns9 жыл бұрын

    Super cool !

  • @captnaidy6122
    @captnaidy61229 жыл бұрын

    Masterful file work Oliver, thank you for sharing. PEACE :-)

  • @Dustypilgrim1
    @Dustypilgrim110 жыл бұрын

    Really liked that vid. Certainly going in my watch later/favs lists for reference purposes. Bloody well done.

  • @oshandmadeknives

    @oshandmadeknives

    10 жыл бұрын

    Thank you very much

  • @piun020900
    @piun0209008 жыл бұрын

    muchas gracias por mostrarnos tu trabajo.

  • @page76metalcraft19
    @page76metalcraft196 жыл бұрын

    Awesome man. Great design. I just finished my first filed spine knife and yours makes mine look like a pile of crap

  • @pinoy7tfc
    @pinoy7tfc8 жыл бұрын

    thats beautiful. great job

  • @rfcilia
    @rfcilia9 жыл бұрын

    that's a great idea, nice job on this!

  • @thevikingoli8847
    @thevikingoli88474 жыл бұрын

    Nice done.... 👌👌👍👍

  • @randallkelley3599
    @randallkelley35999 жыл бұрын

    Thats a darn good looking blank you made….

  • @oshandmadeknives

    @oshandmadeknives

    9 жыл бұрын

    Thanks you very much for the comment

  • @10223220
    @102232207 жыл бұрын

    That looks awesome

  • @alaskameisner
    @alaskameisner8 жыл бұрын

    Looks like thorns -great job

  • @stunt514
    @stunt5147 жыл бұрын

    Pretty damn neat man! 👌🏽🤘🏽

  • @satchibarik
    @satchibarik9 жыл бұрын

    Great Craftsmanship...Good Luck...

  • @demonhunter8533
    @demonhunter85338 жыл бұрын

    Clever and beautiful ....

  • @josesilva1254
    @josesilva12549 жыл бұрын

    Trabalho perfeito. Bela arte.

  • @solosniper86
    @solosniper867 жыл бұрын

    Gorgeous work! Subbed!

  • @stuartracing1
    @stuartracing19 жыл бұрын

    Very very nice work.....

  • @atbimagesllc
    @atbimagesllc8 жыл бұрын

    Thanks, looks great on my tomahawk

  • @WinStunSmith
    @WinStunSmith6 жыл бұрын

    You made an excellent instructional video. You should do more. I’d sub.

  • @jfalbessu4479
    @jfalbessu44796 жыл бұрын

    Muito lindo o trabalho. Parabéns

  • @darksight6405
    @darksight64056 жыл бұрын

    very nice! thank you

  • @tjmy27
    @tjmy278 жыл бұрын

    Awesome!

  • @thechumpsbeendumped.7797
    @thechumpsbeendumped.77977 жыл бұрын

    The pattern came out beautifully, can you show us the finished knife please?

  • @rustyshriver4845
    @rustyshriver48458 жыл бұрын

    thanks just what I was looking for

  • @stripymccatpuss
    @stripymccatpuss10 жыл бұрын

    Nice instructional vid, cheers

  • @Rick63155
    @Rick631557 жыл бұрын

    wow very nice thank you for the showing me I think it' s real cool

  • @faroukalhassany
    @faroukalhassany8 жыл бұрын

    very very good the nice work. ......

  • @Sedge63
    @Sedge6310 жыл бұрын

    Nice file work Oliver.

  • @oshandmadeknives

    @oshandmadeknives

    10 жыл бұрын

    Thanks Simon

  • @telmobrandao5062
    @telmobrandao50626 жыл бұрын

    How do you glue the scales, without getting glue in the file work? Loved the video, keep them coming.

  • @vereabsolutum9131
    @vereabsolutum91318 жыл бұрын

    very nice

  • @uClash
    @uClash9 жыл бұрын

    outstanding.

  • @toppertruthio
    @toppertruthio8 жыл бұрын

    nice work,im in england too where do you get your stell from,and what do you ask for?

  • @Jugernaut305
    @Jugernaut3057 жыл бұрын

    Hi there. Cool job. Could you tell me what's a good file set for this kind of work? Ty

  • @moorshound3243
    @moorshound324310 жыл бұрын

    gob smacked, well done dude! how did you build such a wonderful workshop? look forward to some more pimping vids.

  • @beastlyironworks8296
    @beastlyironworks82965 жыл бұрын

    Well done but it looks really really nice

  • @Mbonner73
    @Mbonner732 жыл бұрын

    Where did you get your circle S makers mark stamp made?

  • @stevenandrade8780
    @stevenandrade87807 жыл бұрын

    I would like to see you do an hour glass/bamboo pattern

  • @MrBlazeart
    @MrBlazeart7 жыл бұрын

    very nice ! Bravo !

  • @essexplodder9796
    @essexplodder979610 жыл бұрын

    Superb work a bit time consuming, but the finished file work is stunning keep up your very good work atb Barry

  • @oshandmadeknives

    @oshandmadeknives

    10 жыл бұрын

    Hi Barry it is really time consuming it took me 3 hours but the finished knife looks amazing, thanks for the comment ATB Oliver

  • @UpACreekProductions
    @UpACreekProductions9 жыл бұрын

    where did you get the bigger tapered round file or is that a tapered half round??? thanks

  • @constantinbarbu.
    @constantinbarbu.8 ай бұрын

    i just realised this is a way old video, thanks tho, nic job

  • @randallkelley3599
    @randallkelley35999 жыл бұрын

    That is first class work, reminds me of a Chinese tree or vine…very nice…...

  • @elmerfox6872
    @elmerfox68728 жыл бұрын

    nice job

  • @MrMunchiemo
    @MrMunchiemo8 жыл бұрын

    Did you say add powder paint?

  • @EDGY12345
    @EDGY123459 жыл бұрын

    I would like to see a vid of you using calipers to scribe a line down the middle of the knife .. ty again ..

  • @TaskMaster1983
    @TaskMaster19838 жыл бұрын

    You said to add something to the epoxy resin when gluing the scales on, what colorant product would you recommend to bring it out? I'm just starting and I'm gathering knowledge so I can jump into knife making with both feet. Your artwork is inspiring!

  • @oshandmadeknives

    @oshandmadeknives

    8 жыл бұрын

    Hi mate if you add powder paint to the epoxy when fitting the scales on to the blade and once the handle is finished the black powder paint make the pattern stand out hope the helps

  • @paralogia

    @paralogia

    8 жыл бұрын

    +TaskMaster1983 This is the type of product. I bought a pack of 20 different kinds (sparkles, metallic, etc.), but can't find the exact one now. I've used them with CA glue with some success, but you have to be fast, it makes it set up faster. Clear epoxy is better. www.amazon.com/Crystal-Clay-Sparkle-Dust-Powder/dp/B017HWMUBU/ref=sr_1_fkmr0_3?ie=UTF8&qid=1457327255&sr=8-3-fkmr0&keywords=metallic+colorant+pigment+epoxy+pack

  • @DiesInEveryFilm
    @DiesInEveryFilm8 жыл бұрын

    Thanks for sharing. Where do you get your knife steel from?

  • @tadpoles10
    @tadpoles108 жыл бұрын

    The finished item speaks for itself 'outstanding' thanks for sharing. atb t ..

  • @randygwheeler
    @randygwheeler4 жыл бұрын

    Can you recommend some good files for this ? My files from ACE Hardware suck. Thanks

  • @Skooty68
    @Skooty6810 жыл бұрын

    Beautiful work there... subbed you through a shout out off one of my subscribers who did a VR for me on my 500 sub comp video,will be watching more,keep them coming Atb Scott

  • @oshandmadeknives

    @oshandmadeknives

    10 жыл бұрын

    Thanks for sub and thanks for the comment, could you please tell me how gave me a shout out so I can go and say thank you. Cheers oliver

  • @Skooty68

    @Skooty68

    10 жыл бұрын

    Alfreso Joe did a vr for me,i asked to give shoutoutsto channels less that 100 subs,help them grow,atb

  • @ralfbear
    @ralfbear10 жыл бұрын

    Nice clear instructions there, Oliver. I quite like the length of the wave, my vine pattern was a bit shorter. Take care, Ralf

  • @oshandmadeknives

    @oshandmadeknives

    10 жыл бұрын

    Hi Ralf thanks for the comment, I normally to the pattern shorter but I thought I will do something different this time. Cheers oliver

  • @ralfbear

    @ralfbear

    10 жыл бұрын

    I quite like it! :-)

  • @EDGY12345
    @EDGY123459 жыл бұрын

    How do you get the line down the middle of the blade ?

  • @oshandmadeknives

    @oshandmadeknives

    9 жыл бұрын

    Hi there I used a set of calipers to scribe the line. Hope this helps

  • @Mbonner73
    @Mbonner737 жыл бұрын

    What type of steel do you use?

  • @MrMattyord

    @MrMattyord

    7 жыл бұрын

    I use 1084

  • @scoutsbushcraft7680
    @scoutsbushcraft76809 жыл бұрын

    How can i buy one of your knifes.can you pmm thanks ray

  • @babayaga9102
    @babayaga91026 жыл бұрын

    why is the second knife's handle has a hollow

  • @summerman2
    @summerman28 жыл бұрын

    what brand files are you using. I bought some at Home Depot and they don't cut worth anything. thanksNice work.

  • @oshandmadeknives

    @oshandmadeknives

    8 жыл бұрын

    I'm not sure on the brand, but they are made in England

  • @warpath8089

    @warpath8089

    8 жыл бұрын

    +oshandmadeknives can you find out,and if the company ships?

  • @mistrcrvr

    @mistrcrvr

    8 жыл бұрын

    +WarPath 808 - I could have sworn he said they were Nicholson files in the beginning of the vid. I inherited my Dad's machine shop tools and most of the files are Nicholson. People talk about the files going dull on heat treated steel but that doesn't happen with better files.

  • @solosniper86

    @solosniper86

    7 жыл бұрын

    Nicholson files are good. The small round file he used first was made by that company.

  • @michaelrt8263
    @michaelrt826310 жыл бұрын

    Seriously, where can I buy one of your knives?

  • @oshandmadeknives

    @oshandmadeknives

    10 жыл бұрын

    Hi there thanks for the interest I do not have a website at the moment but we can discuss designs and materials through email and youtube, hope this is of use. Thanks again oliver

  • @jefflynam6058
    @jefflynam60585 ай бұрын

    Me trying to squeeze my phone to get the ringing to stop after the file strokes😮

  • @robertboltonstaystrong
    @robertboltonstaystrong5 жыл бұрын

    you would be better off holding the handle fully in the vice...you have vibration at the moment which doesn't help,

  • @kaitheredninja9919
    @kaitheredninja991910 жыл бұрын

    Dude! You not good for a sixteen year old. Your good full stop. Brilliant work buddy.

  • @oshandmadeknives

    @oshandmadeknives

    10 жыл бұрын

    Thanks for the support

  • @BangersBushcraft
    @BangersBushcraft10 жыл бұрын

    Fantastic looking design Gave you a shout out on my MrSkooty1968 500 subs Vr Keep up the good work ATB Scotty

  • @oshandmadeknives

    @oshandmadeknives

    10 жыл бұрын

    Thanks a lot

  • @chbabji999
    @chbabji9998 жыл бұрын

    rasp cut file...

  • @xXMinecrafter35Xx
    @xXMinecrafter35Xx8 жыл бұрын

    "quick" xD

  • @bakdraft6578
    @bakdraft65788 жыл бұрын

    A good teacher shows as much as talks You talk way to much

  • @JamesBond-rl1up

    @JamesBond-rl1up

    6 жыл бұрын

    *great

Келесі