Field Output and History Output requests in Abaqus
Our telegram channel for Abaqus : t.me/abaqus_asist
Our LinkedIn page: / femexir
If you want to be informed about our 50% discount codes and other announcements, join our Telegram channel or follow us in LinkedIn.
contact info for using our services:
mirzabozorg71@gmail.com
Comprehensive Abaqus Package: • Comprehensive Abaqus P...
Including 39 hours of step-by-step tutorials.
Don’t hesitate to ask any questions you might have about the explanations presented in this video using the comments below. We try to answer all questions regarding the video details in the comments below.
In this video, Field Output and History Output requests will be explained in detail. First their physical and mathematical concepts will be explained. In the following, the procedure of setting their parameters will be presented in detail.
For the sake of better understanding and clarification, these concepts will be explained comprehensively according to the settings of a model. The model is related to the simulation of compression test of a hyper elastic cylinder that is performed in the axisymmetric space by using both of the Abaqus/Standard and Abaqus/Explicit solvers.
table of content:
- Simulation of the compression test of hyper elastic cylinder
- Force-Displacement curve
- Typical outputs of a mechanical FE simulation
- Different types of solution dependent variables in engineering application
- Step dependency
- Setting the Field Output request parameters
- Frequency of writing the results on the ODB file
- Setting the History Output request parameters
- Special Field Output requests
- Field Outputs that are related to subroutines
- Output tab in Job Monitor
#abaqus
#output
#abaqus_output
#field_output
#history_output
#force_disp_curve
Пікірлер: 16
Very good clarification on the differences of field and history outputs. Thanks.
@FemexIran
Жыл бұрын
Hi. You are welcome.
thank you so much for producing such a comprehensive tutorial. keep going.
@FemexIran
2 жыл бұрын
you are welcome.
Thank you for the video 🙏
@FemexIran
2 жыл бұрын
you are welcome.
آقای میرزابزرگ در تحلیل های explicit میتونیم contact force رو از خروجی بگیریم؟؟؟
@FemexIran
Жыл бұрын
سلام. بله فک نمی کنیم مشکل خاصی داشته باشه. البته من تا حالا اینکارو به صورت مستقیم انجام ندادم. منظور اینکه نیروی تماسی رو به یه روش دیگه و بدون درخواست خروجی از فیلد اوتپوت میگیرم
حاجی دمت گرم فقط ناموسا جان من دوبلش رو هم بزار حداقل تو یه چنل دیگه کارت خیلی درسته
@FemexIran
2 жыл бұрын
سلام. خیلی ممنونم. حقیقتش به دلیل کمبود وقت متاسفانه نمی تونم برا یه موضوع هم ویدیو فارسی هم ویدیو انگلیسی زبان ضبط کنم. ولی تو سایت فارسی زبانمون که femex.ir هستش، کلی ویدیو رایگان هم موجوده. یه ویدیو رایگان به اسم گخروجی گرفتن از آباکوسگ تو سایتمون هست که داخلش مباحث همین ویدیو انگلیسی هم تدریس شده تازه با حل مثالم هست.
after setting history output for all nodes, the output was not visible in the result. Can u help me in this?
@FemexIran
Жыл бұрын
Hi. You must not use history output for all of the nodes. As I have mentioned in this tutorial, you must use it for getting output from some special and important nodes of your model. Also the history output is not visual because it does not generate contours like field output. The result of history output is curves in the history output branch in the result tree in the visualization module. please watch this video from our KZread channel for more clarification : kzread.info/dash/bejne/Z4Smp5uBftKfaco.html
@satyam123ification
Жыл бұрын
@@FemexIran thanks for responding..... basically I need to draw averaged stress-strain curve. So for that I think I have to take out stress at every node. So what's your view ?
@FemexIran
Жыл бұрын
@@satyam123ification You are welcome. I think your procedure is not correct. For getting the averaged stress-strain curve, we use another procedure. Also it depends on your problem. I can explain my procedure according to your problem in an online consultancy session. You can send an email to me to be aware of our terms and conditions for online consultancy sessions. my email: mirzabozorg71@gmail.com
can I just define output request only
@FemexIran
2 жыл бұрын
hi. I didn't understand your question. please explain it in more details.