The way the machine closed after you locked in the second fiber made it seem like something straight out of a sci-fi movie

@vipinkumar5955

Ай бұрын

was about to comment the same lol😂

those automatically close after u aligned looks really fascinating and sci-fi stuff 😂

I like the independent control of your cleaver, the only downfall is more equipment to haul around with the fusion splicer. When I'm in a lift or bucket, the less the better. I use a UCL Swift K4F and it's all contained in one. Strips, cleaves, cleans, fuses, tensile tests, and heats the supportive shrink. It's about twice the price, my only complaint is the cleaver is not manually adjustable, so attempting to re-cleave on an cut with intolerable angle means redoing the whole process or pulling out my corning manual kit. Thanks for sharing! going to look into this cleaver!

@KennyKush-jt7cs

Ай бұрын

I'm currently taking classes for FOI tech, do you have any pointers for finding a starting position in the field?

Holy fuck that was awesome

When those jaws close by themselves it looks like a sci fi gadget like it was about to heat and fix it up like the cut never happened. Real Wal-E moment

they just installed fiber wifi in my house today, bro the machines looks amazing

I like complicated looking machine, this feel like transformer

It's just me or this wasn't a perfect one? It seems that the right fiber had something strange in it's core before the fusion... or am I wrong?

@celticdabs6428

5 ай бұрын

He didn't wipe the first core off, so yes, you are right. He messed up and this would be a fail with my company

@cybernotesdev

Ай бұрын

Yeah it doesn't look like he cleaned those fibers.

guys............. this man is tony stark.

Set the fiber cleaver on a firm position before cleaving(on top of ur splicer, it can be done :D) and you'll get more conssistent perfect cleaves.

Wish we had these in the field

@alexkafka9859

10 ай бұрын

how tf else do you splice fiber?

@johnlafave9743

10 ай бұрын

We don’t really “splice” it like this. We put a fast connect on each line and mate them together via plastic bulk head. It’s pretty simple, but there is higher light loss and reflection 😊

@bnrid8086

8 ай бұрын

​@@alexkafka9859use fast connector barrel

@walkerallen425

8 ай бұрын

@@johnlafave9743I’ve never seen them not spliced like this in the field. This guy is pretty slow with it

@innovativesupportproviders

7 ай бұрын

It was slow on purpose, we had an issue with "Teny Fiber" and the reps wanted a video of how we did it to verify things were right. Plus, it's a video showing an example of how to fusion splice so being as fast as possible was never the point.

I would have redone that right side some would say if the lose passes then it’s good

@zach9524

Жыл бұрын

Yeah 1.2 was high for me. It was a crooked cut.

@Henry-vq6tl

Жыл бұрын

@@zach9524 keep up the good work!

@innovativesupportproviders

7 ай бұрын

I agree, and we did, but this was a video we did at the request of the "TenyFiber" reps to show them how brittle their fiber was. They wanted to see our process and verify it wasn't something we were doing. The equivalent Corning fiber never had this issue, same cleaver, cleaner and splicer.

@user-qb5en9vt9r

4 ай бұрын

rite looked like a bad cleave in my book

@keatomic

3 ай бұрын

Makes me appreciate Corning.

The precision 😮😮😮. Your the my final uni boss.

good splicer machine

Good job like job

portugese

You forgot the sleeve. lol I hate when that happens.

What was the estimated splice loss? Seems it was 0.02 dB.

hello everyone my name is welcome

Wait how does that work? Does it use glue or heat? How can it make a seamless transition between the fibers? How can it maintain the gradient of refractive index?

@shresth146

Жыл бұрын

It's heat, actually the fiber is combination of glass and other polymers that gives it the flexibility. so you don't really need high temps to fuse the two plus these machines are really really accurate (and expensive). so now have your answer.

@user-pv5qc2iu6o

Жыл бұрын

@@shresth146не говори глупостей, нет там полимеров. Там есть стекло оболочки, чистое SiO2 и стекло 98% SiO2•GeO2 2%

@user-pv5qc2iu6o

Жыл бұрын

Сварочник, являясь роботизированным микроскопом сводит два волокна сердцевина к сердцевине. И притом точка сведения волокон, лежит на линии между двумя электродами. Подаётся электрическая дуга, она нагревает волокна, размягчая их до состояния пластилина, после чего «сварочник» слепляет эти два куска «пластилина». Дуга выключается, волокна снова отвердевают, но теперь они единое целое

Connecting of two fiber cables

That's a fancy cleaver. What do you do cleave it at?

@user-pv5qc2iu6o

Жыл бұрын

CT-50

@getyasomeoutdoors9507

11 ай бұрын

12 mm

@TheLuigiSwag

8 ай бұрын

Cleaver I use at work doesn’t have that clamp that holds down the fiber right before you make the cut. Is this an accessory that comes with the tool or is it a separate part? If so what is it called so I can get one for my cleaver. Thanks in advance for your response

@walkerallen425

8 ай бұрын

@@TheLuigiSwagthe clamp isn’t necessary at all for a clean cleave, it slows you’re progress and doesn’t make a difference if that’s what you’re aiming for. I use the same cleaver and it’s worth the $600 if you do buttsplices often

I'd just twist them together, I'm sure that would work.

bro put the wotsit in the thingymabob

Wrongly use the the hand for cleaving time

Doing this on a 144f and the buiness asks how long the work will take.

What kind of cleave is that ?

❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤

P o r t u g u e s e

Day 24 when? 😏

very nice youtube channel brother. I started also 2 months ago. Can you send me picture of your cleaning tissues. I want to buy them. Greetings from Munich

Hello everybody my name is welcome, W e l c o m e.

No splice protector😅

I don't wanna know how much one of those costs.

@OSOKCyber

Жыл бұрын

I just bought one roughly 10g

@OSOKCyber

11 ай бұрын

Yea?

@OSOKCyber

11 ай бұрын

@@marcosavb ?

1.3° ну... не такой уж и хороший скол 🤷‍♂️

I hope your wearing your PPE when your not filming videos

Don't slammed the holder

Is that a fujikura machine?

@innovativesupportproviders

Жыл бұрын

Yes it is! It's the Fujikura 70S

@user-pv5qc2iu6o

Жыл бұрын

В России она называется 80s и стоит ровно в двое дешевле чем 70s в США. Связано это с тем, что в 2014 году она стоила 300’000₽=10’000$, а когда рубль упал в два раза, фирма Fujikura дабы не терять рынок скинула цену для России сразу в два раза до 5000$=300’000₽ 😅

How much is the splicing machine???

@bnrid8086

8 ай бұрын

new Motorcycle

@joshlowe4074

Ай бұрын

A lot

@joshlowe4074

Ай бұрын

Some are around 10k

@arthurteng-ii2pt

Ай бұрын

560dollars

How much

@arthurteng-ii2pt

Ай бұрын

560dollars

А чего волокно слева обгрызанное? А 1,3 градуса это типа нормальный скол? Позорище

To slowly kid

0. Something po makakasigurado na goods yun pag ka cut ko sa fiber or para sure po yun pag ka connect niya

Literally you are very slow and you look uncomfortable.

@SandeepKumar-gp5el

4 ай бұрын

Hello bro

Brother apne kiske sath clean kia fiber ko ?

How much loss showing 😂😂