I usually per-cert my fiber reels on my splicing table and exposing at least 4 feet of cable from the end of the reel. Then I will fusion splice all strands into a 12-strand pigtail per loose tube buffer and record the fluke otdr test results. My customer (Marathon Petroleum) requires pre-cert, post install and turn-up certification results for all cables installed in their close out package. Its tedious work but it is very consistent and makes you a more efficient tech. Keep up the good work.

@fibersplicegod

2 ай бұрын

Nice right on thanks for watching and commenting I appreciate it. Yea I have a had some clients require the reels to be tested before and after install but has faded out a bit now they are only requiring after install test results

I'm always surprised by how roughly you handle the individual fibers, like when preparing to cleave you had the metal mount dangling off the end. I was under the impression that the original fiber consisted of delicate strands of glass, Is todays fiber a more rugged polymer that can handle more abuse? Or do you just have the "nak" when it comes to working with the stuff?

@fibersplicegod

Жыл бұрын

Haha yes I am very comfortable with the fibers they are very delicate and can break pretty easy I am just used to working with them on the daily and have a nak for it. Don’t get me wrong I have broken fibers in the past but after dealing with it on the daily for 10+ years I’m super comfortable with working on the fibers in any scenario

What is your tool bag to the right, there beside the Sumitomo case?

@fibersplicegod

Жыл бұрын

It is just a basic tool bag from homedepot they work great for inside jobs and remote locations 🙌

The fiber I’m running here in south Texas must be cheap stuff. Absolutely no armor on most of it. 96 ct fiber is maybe 1/4 inch. Even the 432 it’s micro fiber binder less. Cracks so easy

@fibersplicegod

10 ай бұрын

Yea all depends on the project for the most part out here it’s always armoured unless it’s inside wiring. Thanks for watching and subscribing

Where can you get that quick connect piece?

@fibersplicegod

11 ай бұрын

The quick connects are a Afl product can be hard to get since there website has recently been hacked lol I’ve got some for you if you need some just let me know

Just get a bare fiber tester made by Divot is so much better I feel.

@fibersplicegod

7 ай бұрын

Yea totally agree ive got three of them they work great thanks for watching and commenting I appreciate it

What type of ring cutter/knife is that? Brand?

@fibersplicegod

2 ай бұрын

its just a simple roofing hook razor blade can get them at any home building center like home depot

What part of america do you work in?

@rudeeq

Жыл бұрын

maybe at Hawaii 😝

@fibersplicegod

Жыл бұрын

Not in America in Canada west coast

@fibersplicegod

Жыл бұрын

Canada west coast

@rudeeq

Жыл бұрын

we waiting you in Connecticut✨

@fibersplicegod

Жыл бұрын

What’s the builds like out there lots going on?

Can you just read the sheath footages? Also, I will not buy those pelican case style launch boxes anymore because of how easy it is to pinch the fiber. I buy the “reels” now like FiberXP and similar. Comes with a protective clamshell pouch.

@fibersplicegod

10 ай бұрын

Yes you can just read the meterage but some customers want the real pre tested before installing to insure there is no manufacturer defects. Yea I feel you there have to be extra careful when putting these ones away I have multiple the real ones and the pelican case ones. Thanks for watching and commenting I appreciate it

What tester is that ????

@fibersplicegod

Жыл бұрын

This is the exfo FTB 200 it is a older unit but still gets the jobs done and gives me the readings I need