Fiber Laser Unboxing
I just added a new toy to the shop! Here I am unboxing a 30w split fiber laser from OMTech Lasers. Up to this point all of my laser experience has exclusively been with Co2 lasers and the fiber will be a new adventure and open up new product lines. I was suprised at how easy it was to set this up and get going. The biggest hurdle will be dialing in settings for the new material I will be working with.
Affiliate Stuff:
omtechlaser.com/collections/f...
OMTech Lasers:
omtechlaser.com/LGS
Affiliate code “LASERGUYS”
Coupon code “LASERGUYS5OFF”
Amazon Affiliate Store - Supplies, tools, and consumables
Amazon.com/shop/beardedbuildsco
Join the OMTech Facebook group!!!
/ 1364016877267714
Пікірлер: 77
Just ordered one. Your video is quite helpful in showing me what to expect when my machine arrives. Thanks much!
Leaving the lens on and laughing at yourself.....loved it. Great video. I'm waiting on my 80w Mopa to arrive as I type this.
thanks for the video. I am just about to get started and this gave me a heads up on what to expect.
Awesome !!! I would have probably done the same thing with the. lens and started panicking. Just ordered mine tonight so, I am trying to watch all of the "Laserguys" setups and info videos while I *impatiently* wait mine to arrive. learn all that I can now, so I can convert from the CO2 with as much "ease" as possible ! Thank you for the video !
Congrats on the new fiber laser. They are a lot of fun. Something to keep in mind is that if you plan to do any engraving with it you really need a good exhaust as the particles it throws off are super tiny and can be very dangerous to your lungs.
@BeardedBuildsCo
2 жыл бұрын
Yep! I am working on setting that up now!
@Webnicity
Жыл бұрын
Good to know, thanks
That is awesome. Getting my CO2 OMTech today and will be doing the air assist upgrade right from the beginning.
@BeardedBuildsCo
2 жыл бұрын
Welcome to the crew!
@brocklewis8854
2 жыл бұрын
@@BeardedBuildsCo tha k you. I am looking forward to it.
Great video, thanks.
Hi. Does it print just as well all the way up to the 7.8" maximum? I have something that's real close to that that needs this laser. I don't want to have to get the larger one. Thanks!
Thank you for this video! Have you moved over to Lightburn now that it is available for the fiber machines?
@BeardedBuildsCo
Жыл бұрын
Yes all of my machines are on lightburn. Check out my coin video.
Have you attempted wood engraving yet? What parameters did you use?
Great video. I really want one of these myself, but my main roadblock is what do you do to exhaust fumes?
@BeardedBuildsCo
2 жыл бұрын
The fumes on this are much less than a Co2 and wood. Most people will set up an inline fan and have set a duct next to the fiber work space to pull the fumes.
OM Tech is out of stock of the 80mm Rotary device. There are many online through EBAY. Would they work with this unit?
Great acquisition, Brandt!! Let us know if you have any questions. #beamingwithpossibilities
Buying a JPT 50w fiber. Cant wait to play around with it
@alexg8083
Жыл бұрын
How much would that run for
@BeardedBuildsCo
Жыл бұрын
Who is your question directed to and about which machine?
Nice video! I have just recently begun my study of both CO2 and Fiber lasers as I would like to add both to my shop.I was curious if you could have made the business card the other way to where it kept your beard black and everything else was lighter? I have a company logo that I would probably want to play with to see which part would be better to engrave.
@BeardedBuildsCo
Жыл бұрын
Yep all you would need to do is add and offset or and outer circle and it will invert the design.
can it be used on a painted clear or white acrylic to give that backlight panel?
Hello do you know which rotary tool would go with it? Thanks Shar
Did that mains lead really have male pins on both ends ????
Do u think u should have got a mopa?
Can I do this and print on mobile covers
Can this mark polyurethane and nylon?
Should I be able to cut through anything high fiber with this? I am having trouble with beans and broccoli.
@BeardedBuildsCo
2 жыл бұрын
Triscits are better because the are nice and flat.
Hey can this Machine cut stainless steel metal and what the price
Were you unhappy with your 30watt if within a year you upgraded to the 100 watt MOPA?
@BeardedBuildsCo
Жыл бұрын
The 30w was great for learning and getting started. I did find that I wanted to do colors and wanted to get deeper engravings. This is where the 100w MOPA came in. If I was to buy a starter machine again I would have done a 50w or higher. The 100w MOPA is also part of a collaboration that I am doing with OMTech.
Well just when I’m getting my 90watt CO2 paid off, looks like I’m going to get in debt again
Is this compatible with light burn at this time you made this video in 2021 i Just started getting used to light burn.
@BeardedBuildsCo
2 жыл бұрын
Yes it is! I have been using lightburn on it all through the beta testing. You do have to make sure that you get the JCZ board.
Hi i am from India i want this machine please guide me and price?
The usb doesn’t show up I’m my device manager, does that mean it’s good to go?
@BeardedBuildsCo
Жыл бұрын
Is the machine on? Does it connect to the software?
My drivers won’t install for my 50w OMTech engraving laser. Fixing to package it back up and ship it back
@BeardedBuildsCo
Жыл бұрын
The drivers installing has nothing to do with the actual laser. Are you trying to use ezcad or lightburn
@Johnstonfamily2012
Жыл бұрын
@@BeardedBuildsCo LightBurn
@BeardedBuildsCo
Жыл бұрын
@@Johnstonfamily2012 did you check the box on the driver install screen during the lightburn install?
@Johnstonfamily2012
Жыл бұрын
@@BeardedBuildsCo not sure honestly, every time I try to install drivers it says there’s not a signature card for the driver
@BeardedBuildsCo
Жыл бұрын
Are you on a windows computer or Mac?
Price?
Bonjour , pouvez vous maider svp jai la machine mais impossible d'installer les pilotes Universal car je ne lai pas sur la clé usb fourni avez vous un lien où je pourrai télécharger tout ce qu'il faut piur la machine svp merci beaucoup
does this work with different software, if so what software?
@BeardedBuildsCo
7 ай бұрын
Ezcad2 and lightburn
4:05 . . . that's called a keyway mkay. . . .
@BeardedBuildsCo
Жыл бұрын
Thanks! Words are hard.
@kevinspacey5325
Жыл бұрын
@@BeardedBuildsCo nah im just joking, i'd love to spend an afternoon learning what you know as a toolmaker myself. You can never know it all. . . .
What’s the lifetime span on these units?
@BeardedBuildsCo
2 жыл бұрын
They are rated for 100,000 hours
Hello, I have a dual red light machine I purchased from china recently, redpointing is working fine but the leaser does not fire up when I click mark, any help on this will be appreciated
@BeardedBuildsCo
2 жыл бұрын
Are you getting an error message? Have you focused the head? Is the lens cover on?
@chapysocialcard
2 жыл бұрын
@@BeardedBuildsCo, Yes the head is focused and there is no cover on the lens, it not giving any marking light or sound whatsoever apart from the Red(F1)
@chapysocialcard
2 жыл бұрын
@@BeardedBuildsCo kzread.info/dash/bejne/mqufo9OKkZW4k6g.html
@chapysocialcard
2 жыл бұрын
kzread.info/dash/bejne/qHmIysenfNyalLw.html KINDLY REFER TO THE VIDEO FOR YOUR HELP
@chapysocialcard
2 жыл бұрын
@@BeardedBuildsCo just to answer your question, the software is not giving errors, there is movement inside the lens without marking light.
Can you use Lightburn on Fiber Laser??
@BeardedBuildsCo
2 жыл бұрын
Not yet. From what I have heard they are working on fiber laser integration.
@HardDeck
2 жыл бұрын
Okay, lets see some cool projects. Steer clear of modifying guns. Last thing you need is ATF hounding you!
how much did the machine cost?
@BeardedBuildsCo
Жыл бұрын
omtechlaser.com/collections/fm-series-fiber-laser-markers/products/30w-fiber-laser-engraver-cutter-usb-30w2-us/?ref=lsg
Bonjour être vous contend de votre fiber raycut ???? 🤔 Hello be contend you of your fiber raycut???? 🤔
Ha, there are 8000 results for metal business cards on Etsy. What is the actual way one could make money with a laser marker?
@BeardedBuildsCo
7 ай бұрын
How I make money. I put in the work and network with businesses. I mark flashlights, wallets, bracelets, all kinds of promo items for them or gifts for there employees. I don’t make any metal business cards.
How much watts(
@BeardedBuildsCo
2 жыл бұрын
30w
I need a software bro plz help me😭😭
@BeardedBuildsCo
10 ай бұрын
Lightburn
Its realy nice , i would ask you fee question about it , how i contact you ?