Thank you cole tool centre for this video I was searching how to setup my foot pedal for use as the marking button and you just blurted it out as soon as you started the software, it was exactly what I needed and now am using it to mark all my tools with my logo.

Thanks for taking the time to prepare the video!

Very helpful video! Thank you!

The depth of Engraving is dependant on the type of metal the power used and the number of repeats.

does the ground wire at the bottom of the machine need to be grounded?

I ordered through an alibaba supplier when ordering ensure if purchasing a rotary attachment chec the software is suitable for doing graffic with solid fill and not miss Engraving where the attachment rotates.

@jimaecalors7986

3 жыл бұрын

alibaba is bad. same as bank transfer.

@jessicaliu7424

3 жыл бұрын

@@jimaecalors7986 kzread.info/dash/bejne/YpeVmJhpZbKZidI.html

@smithsunny3667

3 жыл бұрын

Sundor Laser factory can provide this machine,contact sales001@sunlaser.cn whatsapp：+86 18511761675

Is seem the frequency the fibre laser uses has little or no effect on skin there are video's on KZread with people putting there hand in the beam. I tried marking acrylic, the aluminium underneath was marked with no effect on the acrylic.

@Quantao-sl2zc

5 жыл бұрын

acrylic need co2 laser， fiber laser not do it

كم سعر المكنة ٢٠واط ٣٠واط ٥٠واط مع المواصفات الفنية للمكنة

I have noticed that this type of machine has no covers on it. Is this dangerous? What if you slip and get your hand in the way? Also do you need to wear goggles when marking stainless or aluminium? Thanks for the video!

@kmyerslp85

5 жыл бұрын

Goggles yes. You can look up videos of people putting their hands in front of the fiber laser and it not doing anything. This is even with those 1000w rust remover laser "guns". If you put your hand in front of a co2 laser you will get torched. lol

@smithsunny3667

3 жыл бұрын

Sundor Laser factory can provide this machine,contact sales001@sunlaser.cn whatsapp：+86 18511761675

Great video! thanks! Question, what's the difference between Ezcad 2 and 3, and is it worth paying more for 3?

@Graemecns

2 жыл бұрын

Sorry I don't know. Thanks

Is it just the lighting, or are the power buttons on your box NOT illuminating when you press them to engage power?

@Graemecns

2 жыл бұрын

Sorry I can't help I sold the machine Years ago.

I have the same machine but it only shows 1 red dot laser where do i setup settings to show 2 red dots get them aligned and show the red border where font will engrave? Thank you

@Graemecns

4 жыл бұрын

I have sold my machine but the laser control I believe was in the setup menu. When you are getting ready to engrave.

Was the program that was included in the usb, only a demo??

@Graemecns

Жыл бұрын

From memory the full program there were also many versions of the program able to be downloaded from the web

So, if you grab the corner of the box in EZCAD and make it bigger or smaller the size of the laser box on the worktable will also resize accordingly?

@Graemecns

2 жыл бұрын

I no longer have the machine. from memory I think you have to set the work area in the menu's

@maggiezhang4077

2 жыл бұрын

Yes, Aaron.

Can this engrave stainless steel? I want to engrave metal business cards. Also, do you know if this is a QS or QB model laser, and from your knowledge which do you recommend.

@Graemecns

4 жыл бұрын

Yes this can deep engrave most metals. I am unsure on the model sorry. Make sure if you buy a machine they sell you software hardware suitable for Graphix not just text if you intend to do any ROTARY engraving.

@riiyung1081

3 жыл бұрын

kzread.info/dash/bejne/pW2TxreEcdaylbg.html, marking on ss, If you need can contact me

@smithsunny3667

3 жыл бұрын

No problem to engrave stainless steel,Sundor Laser factory can provide this machine,contact sales001@sunlaser.cn whatsapp：+86 18511761675

me puedes enviar el manual de operacionrs

@jessicaliu7424

3 жыл бұрын

ttps://kzread.info/dash/bejne/YpeVmJhpZbKZidI.html hi, dear friend have my contact information in the video

Link ? 🙏

From memory price was about $5000 usd in china

@riiyung1081

3 жыл бұрын

kzread.info/dash/bejne/aY1_u5SQYpCXgqw.html If you need can contact me

@jessicaliu7424

3 жыл бұрын

ttps://kzread.info/dash/bejne/YpeVmJhpZbKZidI.html hi, dear friend have my contact information in the video

@smithsunny3667

3 жыл бұрын

Sundor Laser factory can provide this machine with cheaper price and same quality,contact sales001@sunlaser.cn whatsapp：+86 18511761675

Can you tell me where you ordered this from?

@justinjia5904

4 жыл бұрын

factory direct WhatsApp:+86-133-4627-2057. Email: justin@jnruijie.com

@jessicaliu7424

3 жыл бұрын

kzread.info/dash/bejne/YpeVmJhpZbKZidI.html hi, dear friend have my contact information in the video

@smithsunny3667

3 жыл бұрын

Sundor Laser factory can provide this machine,contact sales001@sunlaser.cn whatsapp：+86 18511761675

I want to buy a 100w fiber laser marking machine. please help me which brand is good work

@Graemecns

3 жыл бұрын

Sorry I am no help with your decision

can you do one where you laser pet id tags?

@Graemecns

3 жыл бұрын

Most pet tags are anodized aluminium which you can do with a much cheaper co2 laser the fibre laser is for marking directly on metal like stainless steel

How is it holding up? ive been contemplating of buying one

@Graemecns

4 жыл бұрын

I seems to be OK but I only purchased as a demo machine to see how it performs and decide if I wanted to import. So I do not use very often and have my demo machine for sale.

@cudd14

4 жыл бұрын

Cole Tool Centre thanks for the reply, I’m think I’m going to go ahead and make the purchase for one, hopefully everything turns out well. No one seems to have this machine in my area

@Graemecns

4 жыл бұрын

If you are going to purchase and want to use the rotary chuck with "graffic" confirm with the supplier that it will do graffic on rotary correctly without leaving lines the software they surplied with my machine was supposed to be capable but after a long period of trying the said I had to upgrade the main board and software to do graffic on rotary table without leaving lines when it rotated to next position. Rotary text is OK.

@cudd14

4 жыл бұрын

@@Graemecns thank you for that tip I guess thats my only worry to find a good supplier lol

@jessicaliu7424

3 жыл бұрын

@@cudd14 kzread.info/dash/bejne/YpeVmJhpZbKZidI.html hi, dear friend have my contact information in the video

Can u share the link where u purchased this from please...

@Graemecns

4 жыл бұрын

I purchased from alibaba and imported as a sample to check quality and performance if you are in Australia I would be interested in selling my demo machine.

@princeodinson3239

4 жыл бұрын

@@Graemecns what's ur email address???

@Graemecns

4 жыл бұрын

@@princeodinson3239 sales@coletoolcentre.com.au

@kirkprice3668

4 жыл бұрын

@@Graemecns Are you still try to sell this one?

@jessicaliu7424

3 жыл бұрын

@@princeodinson3239 kzread.info/dash/bejne/YpeVmJhpZbKZidI.html hi, dear friend have my contact information in the video

What is the brand of this fiber laser?

@Graemecns

4 жыл бұрын

Purchased from Shandong Shuangjing CNC Laser Equipment Co Ltd

@jessicaliu7424

3 жыл бұрын

kzread.info/dash/bejne/YpeVmJhpZbKZidI.html hi, dear friend have my contact information in the video

@smithsunny3667

3 жыл бұрын

Sundor Laser factory can provide this machine,contact sales001@sunlaser.cn whatsapp：+86 18511761675

Does this machine also cut ?

@Graemecns

5 жыл бұрын

I would say no in practical terms with many many passes it will get through very thin material say "aluminium can"

@Quantao-sl2zc

5 жыл бұрын

50w 60w 100w can cutting 0-1mm metal sheet.

@Nynexx

4 жыл бұрын

@@Graemecns it does. takes multi passes.. looks like crap. if you want cutting buy a cnc plasma cutter

@monelfunkawitz3966

4 жыл бұрын

You need at least 200-250 watts to cut aluminum, so you are in the CO2 laser range.

At wht price did you got

@jessicaliu7424

3 жыл бұрын

ttps://kzread.info/dash/bejne/YpeVmJhpZbKZidI.html hi, dear friend have my contact information in the video

@rachelgao5572

3 жыл бұрын

Hello, we are a production factory. Are you interested in knowing? My contact information is attached below wechat/whatsapp/skype: +86 18563596493 or my Email rachelgao@qintanglaser.com

where did you bought it?

@Graemecns

3 жыл бұрын

I ordered through an alibaba supplier when ordering ensure if purchasing a rotary attachment check the software is suitable for doing graffic with solid fill and not miss Engraving where the attachment rotates.

@andyzhu1994

3 жыл бұрын

sales002@sunlaser.cn whatsapp + 86 18511761659

@jessicaliu7424

3 жыл бұрын

kzread.info/dash/bejne/YpeVmJhpZbKZidI.html hi, dear friend have my contact information in the video

@smithsunny3667

3 жыл бұрын

Sundor Laser factory can provide this machine,contact sales001@sunlaser.cn whatsapp：+86 18511761675

@rachelgao5572

3 жыл бұрын

Hello, we are a production factory.Are you interested in knowing? My contact information is attached below wechat/whatsapp/skype: +86 18563596493 or my Email rachelgao@qintanglaser.com

how much you this machine？

@riiyung1081

3 жыл бұрын

kzread.info/dash/bejne/aY1_u5SQYpCXgqw.html If you need can contact me

@jessicaliu7424

3 жыл бұрын

kzread.info/dash/bejne/YpeVmJhpZbKZidI.html hi, dear friend have my contact information in the video

@smithsunny3667

3 жыл бұрын

Sundor Laser factory can provide this machine,contact sales001@sunlaser.cn whatsapp：+86 18511761675

@rachelgao5572

3 жыл бұрын

Hello, we are a production factory. Are you interested in knowing? My contact information is attached below wechat/whatsapp/skype: +86 18563596493 or my Email rachelgao@qintanglaser.com

Price

@justinjia5904

4 жыл бұрын

factory direct WhatsApp:+86-133-4627-2057. Email: justin@jnruijie.com

@riiyung1081

3 жыл бұрын

kzread.info/dash/bejne/aY1_u5SQYpCXgqw.html If you need can contact me

@jessicaliu7424

3 жыл бұрын

kzread.info/dash/bejne/YpeVmJhpZbKZidI.html hi, dear friend have my contact information in the video

@smithsunny3667

3 жыл бұрын

Sundor Laser factory can provide this machine,contact sales001@sunlaser.cn whatsapp：+86 18511761675

WTH? You completely skipped the part between unboxing and plugging it in! 🤦‍♀ I came here because no instructions on assembling the machine were given with mine.

What's the price plz

@riiyung1081

3 жыл бұрын

kzread.info/dash/bejne/aY1_u5SQYpCXgqw.html If you need can contact me

@jessicaliu7424

3 жыл бұрын

kzread.info/dash/bejne/YpeVmJhpZbKZidI.html hi, dear friend have my contact information in the video

@smithsunny3667

3 жыл бұрын

Sundor Laser factory can provide this machine,want price?contact sales001@sunlaser.cn whatsapp：+86 18511761675