Ah I have this fun to come soon. Still, doesn't look too bad of a job. Nice to still see a reasonably modern car with basic mechanicals to work on! Mad how long Fiat have been using this FIRE engine now.

Great video. No fussing about, and clearly explained. 👍

the sump pan lasted about 5 years longer then it would have in my state. nice Job Rob!

@OneAuto

6 жыл бұрын

That's very true Mike. Cheers 🍻

My mum ended up with a rusted out sump on her last Ford Focus. Before that I didn't realise rusty sumps were a thing. Good job, the new one will outlast the car 😂

@OneAuto

6 жыл бұрын

Cheers mate 👍

Nice video! Thanks for sharing Rob!

@OneAuto

6 жыл бұрын

Cheers Luis 🍻

Nice job! I also own a Fiat Grande Punto, and luckily never had any issues with oil leaks so far. In fact, I really haven't had any major issues with my car so far. The car has almost run a good 270.000KM, of which I rode 30.000KM myself. The only major thing that needed to be replaced was the original clutch, which hasn't been replaced since the car was built.

clearest guy on the internet by far no waffle

Cheers Rob , another good video production.

@OneAuto

6 жыл бұрын

Cheers Chris 🍻

Enjoyed, for sure and for certain.

Very helpful and well filmed 👍 I was thrown by the fly wheel plate😮👍👌

Nice job Rob, good to see Fiat are still using naf metal and rusting. Some things never change especially when it comes to rust and Fiat.

@OneAuto

6 жыл бұрын

Yep keeping us in business. Cheers 🍻

Cheers One Auto.Just did Mom's 2001 Palio 1.2 mpi which has the same sump. I didn't put enough sealant bead on the edge and had to redo the job.What a pain to clean off the old silicone underneath the block.The video is missing the most important part IMO that is to stage tighten the sump bolts with 15 min intervals as recommended by Reinzosil that I used.Why the Italians couldn't give it a conventional gasket is a mystery.Fix it tomorrow again.hahaha

Great vid Rob Cheers Jamie

Proper job there mate. I enjoyed it :-)

@OneAuto

6 жыл бұрын

Thanks Jan 👍

A crusty Fiat good to see some traditions are still going strong! Good work in all seriousness always interesting to see what you have in.

@OneAuto

6 жыл бұрын

Cheers David 👍

Great Video, thanks

Nice work!

Nice work, Rob.

@OneAuto

6 жыл бұрын

Thank you sir 👍

Hi Rob, we used to have a saying, "remember on a quiet night when you could hear Fiats rusting" seems it still applies. Nice one.

@wooly0191

5 жыл бұрын

that was alfas, not fiats

@stephantimmermans6107

4 жыл бұрын

These parts are also rusted on your vehicle mate...

Another job well done sir . , Looks like some exhaust repairs in the future for you.

@OneAuto

6 жыл бұрын

I think my homemade bracket will keep the exhaust safe until it drives down the auction lanes next week. Cheers Keith

Back in the 80's I owned a Fiat Strada 130 Abarth (Remember the TV ad? - "Built by robots, driven by fu**wits"....or something like that) and if you listened very, very carefully you could hear it slowly rotting away. A chap once told me that FIAT stands for - Fix It Again Tomorrow, and he worked for a Fiat dealership as the Head Technician, honestly. I'm sure they've come on leaps and bounds since then.......well apart from the sump pans being made from tin. Great vid, Rob :)

@OneAuto

6 жыл бұрын

Tiger moth Cheers man.... my mother owned Strada and used to take me to school in it 😂

Missing you man!

Thanks for your video i have done my sump on my punto grande 1.4 petrol your video was so helpful cheers 🍻

Love you video fantastic

Wow...I'll never complain about a stubborn oil pan ever again, that was rough! Nice job :)

Good video from India

Thanks for this Rob, great tutorial with clear instructions, you've just saved me (or rather my son) a hefty bill - bought a 2007 Grande with a rusty sump & a minor oil-leak & found out on cleaning it up that the oil was seeping through the sump. Luckily the exhaust has been replaced recently, so came off easy, same old stubborn sump sealant though!

@WhyYouTubeviewer

5 жыл бұрын

Steve Ward hi , what was the price for the repair? Thanks

Cheers Rob good looking video production think it beats Eric O!! What battery ratchet do u use or recommend for the UK cheers Sandy

@OneAuto

6 жыл бұрын

Thanks Sandy. I use Milwaukee M12 3/8 impact ratchet. Got it here www.automotive-consumable-supplies.com/product/milwaukee-m12-impact-ratchet-38/

I think you've just increased its market value!

@OneAuto

6 жыл бұрын

Yeh probably :)

Nice and shiny!

@OneAuto

6 жыл бұрын

Not for long 😂

Very nice

Didn't realise you were based in Daventry; I only live a short scoot up the A5 in Hinckley.

I have the 1.3 cdti fiat engine in my Combo I have done oil changes I have replaced the fuel filter assembly and more I think I’m getting more confidence to do jobs on my van rather than putting it into the garage I really need to replace my oil pan as it’s really rusty but not leaking yet.

Worth checking the front metal coolant pipe for corrosion. They tend to rot too.

@jochenstacker7448

Жыл бұрын

They do indeed. Ask me how I know! 😂

Nice job. How much for be done this job ? Thank you I have same problem

hi my mini cooper diesel has raised ridges around the lip of the sump instead of a Chanel for silicone, any ideas why ?

It's morning here so Good morning Rob! That sealant holding that sump was crazy strong. Nice work around on the exhaust flange. Complete with "Brassy nuts". (ha ha) I was just thinking if you were taller and let your hair grow longer you could be the next Edd China!

@OneAuto

6 жыл бұрын

Good afternoon Wyatt. Yes the sealant is a good adhesive. As for Edd China, I don't have any orange gloves 🥊

Next Saturday i am taking my grande punto to the garage to get a quotation for replacing the oil sump pan. How much should an honest quotation be?

18:55 is when I remember the pan bolts/nuts I cleaned are laying about 30' away :))

Great video Rob were you been hiding not posted in a while

@OneAuto

6 жыл бұрын

Family stuff and a well needed holiday. Back at it again

@paulmayou370

6 жыл бұрын

glad to see you back defo need a holiday for a recharge dont crash and burn will miss the videos

He Rob. If you had a car where the oil leak wasn't so obvious what would you do to try find it?

I have this exact problem with the sump on my punto. How much would you estimate it will cost to get repaired?

how much would this cost to get done at a garage for parts + labour?

"the guys selling it and doesn't want to spend a lot of money" that old chestnut 😒

Perfekt erklärt

Yo tengo un Fiat Grande Punto 2007, el Carter es similar, le compré y se ve como el que le pusiste a ese Fiat, aplica igual? Motor 1.4

I wish I had a Ramp. No fun working on the Drive.

nice work can you tell me did you remove under engine cover or was there not one on it

@OneAuto

5 жыл бұрын

They don’t have one fitted

Would this be similar for a Fiat 500? My sump has rusted through, so would this tutorial be OK to follow?

@OneAuto

3 жыл бұрын

Not sure as newer ones have a different engines. But most sumps are similar

Done mine today with your help thanks piece of piss when you know how

did i see right that the sealant is use by july 2015?

@OneAuto

6 жыл бұрын

Haha yes it did.. I never noticed that. There u go... if it tastes ok, ignore the sell by date 😂

Why not change big end bearings while you are there?

Do you have to take off the exhaust to take the sump off? Or do you think you could work around it?

@OneAuto

4 жыл бұрын

100% needs to come off

Good video, surely a sump should last the life of the car.

@OneAuto

6 жыл бұрын

Yes if it's not one of these Fiats. Cheers 🍻

Do you put the oil right away? I normally let it sit for awhile, always concerned about oil leaks, maybe I been wasting time. Good job.

@OneAuto

6 жыл бұрын

Not really your ok to put it in straight away with this sealant as it's so thick. That being said it was about an hour before I put the oil in for this one due to other jobs and customers coming in.

Ive only just realised due to this video that that rusty circle of metal on the front is a support bracket , mine is in the same condition as this one . The bracket it bolts to is missing , does anyone know if it ava as a part to purchase , thanks

@OneAuto

6 жыл бұрын

You can buy it from your local Fiat dealer

That was a nasty & stubborn sump pan!

@OneAuto

6 жыл бұрын

I know it always makes you think....have I taken all the bolts out 😊

@aussiebloke609

6 жыл бұрын

Damn that sealant was holding on. If only they'd made the _entire_ oil pan from the same stuff. :-P

@OneAuto

6 жыл бұрын

Yeah that would be better.

@ericcorse

6 жыл бұрын

You could have left the fasteners out and I bet it wouldn't make any difference.

@nexus7tablet610

4 жыл бұрын

Beats the old cork seals they used to come with. Modern sealer has cured many oil leaks on vintage machines, a necessity now that oil leaks = mot fail.

13m is a bit overkill for a oil pan lol , good work.

@OneAuto

6 жыл бұрын

Yeah just a bit. With that sealant you don't need any bolts

@themechanic6117

6 жыл бұрын

One Auto, I guess I'm on a one auto binge lol I guess I've seen this one already yet I watched it again 😂👍

Cheers mate, helpfull video, good to show how to do it since there.s bunch of FIAT's on road with same engine. ;) Could u give a tip from where u buy the original parts? Any website?

@OneAuto

6 жыл бұрын

skunkszecsi Thanks! I don’t know of any websites selling original fiat parts. Just my local dealer.

Just got a price for a new sump from Windsor's fiat heswal £316 for the sump and £360 to fit where did you get yours from? that price is off the reg and chassis no so defo the right part.

@OneAuto

2 ай бұрын

Was from Fiat dealer. Cant remember the cost. You can get cheaper aftermarket ones. Sometimes they fit well but it can be a gamble

@user-ux9ll3yk5y

16 күн бұрын

Nearly £700 😮😮😮😮😮

2:20 is that the crank position sensor right at the front there

@OneAuto

6 жыл бұрын

Yes... sooo tricky to get to those 😂

What power tool do you use mate

@OneAuto

4 жыл бұрын

Milwaukee 3/8” ratchet and 1/2” impact gun, Dewalt reciprocating saw and a cheapo die grinder

Fiat- Fix it again Tony.

@OneAuto

6 жыл бұрын

Fix it again tomorrow 😊

I buy a new pan for fiat panda 1.2 2003 for 70€ and is good.

Sir my fiat linea sump threads are damaged . What I do

@OneAuto

4 жыл бұрын

They will need re-tapping or drilling out and thread inserts installing. Get an engineer to do this if you don’t know how

I'm doing this job on a 2010 Panda and I've just discovered that I need to take off the cat to remove the oil pan. Oh joy! But since I've got P0420 I might as well while I'm in there. A small oil change has turned into a two week job.

@OneAuto

Жыл бұрын

Welcome to my world 😊 Hope it goes ok for you

@jochenstacker7448

Жыл бұрын

@@OneAuto I managed to remove (and completely mangle) the oil pan and take off the cat, and need to replace both. The cat because of an error code and the oil pan because of the removal process. I just discovered my radiator is rotten. This is the job that keeps on giving! Luckily I'm off for two weeks and I can just leave the car up on blocks for that time

@michaelaustria75

Жыл бұрын

Hello I have to do this job on my Panda 169 (2010) can you tell me what I have to disassemble??? Is it necessary to remove the catalytic converter?

@jochenstacker7448

Жыл бұрын

​@@michaelaustria75 it may be possible to just loosen it, but by then it's easier to just remove the cat, because it's about the same work. The heat shield has to come off, then undo exhaust manifold bolts and then unclamp the cat. There are more screws underneath that hold the cat and some clamps, it's not great, but not impossible either. What engine does your panda have? Is it front wheel drive or four wheel drive?

@jochenstacker7448

Жыл бұрын

​@@michaelaustria75 this video is very spot on, also for the Panda. *IMPORTANT* Get angled prying tools to take off the pan, unless it's already beyond salvage. If you need a new pan, get an original one. I bought a cheap one and the oil plug would not seal and neither did the rest of the pan, you'll never get it to seal to the block.

that did well for a french car

@ryantaylor1559

5 жыл бұрын

Fiat are Italian

@TheCornishGingerOfficial

5 жыл бұрын

@@ryantaylor1559 lol that was part of my joke mate 😂😅

sealant ?????? no more nails more like lol them sumps do seam very thin

@OneAuto

6 жыл бұрын

Yes it's tough stuff alright

I can't believe fiat still uses steel sumps. Majority of manufactures use aluminium and some are now plastic. Oh well keeps mechanics busy lol

@OneAuto

6 жыл бұрын

It sure does

(FIAT) FIX IT AGAIN TOMORROW

Don't force it .... get a bigger hammer !!!!

should just welded it

Weird design of Fiat to say the least.

don t use fiat sealer!!!! to tight,haha

Sump full of sealant....

@OneAuto

5 жыл бұрын

vladophilip ???

Annak se volt gazdája,időbe rendbekellet volna hozni.!

rust buckets