Hope it'll help :)

@dannygameplayes6363

3 ай бұрын

It helped, ty from 🇮🇹(where this tuna can was invented

Thanks. That's great help. 👍

You da man, boutta tackle this myself today. Hope it goes well!

@sushi_garage

Жыл бұрын

Not a big deal. Good luck:)

Nice work!

Thank you!

Good one

If u need to put in stop radiator leak, do u out it in the resevoir tank as well?

How much coolant did it take to refill the reservoir back up after being drained completely?

Any other way to remove radiator fan with out having to break it all down can you remove the skid plate and reach up under it loosen screws and drop it down thru the bottom just wondering

@sushi_garage

Жыл бұрын

To remove blower only you could try to unscrew this two bolts first, disconnect this two plugs and you will see if you have enough space to take it out. But personally I think it will be impossible. There is no enough space but you can always try before removing front bumper. Good luck.

Thank you for the video. What is the labor time on this?

@sushi_garage

8 ай бұрын

I think it's about 2 hours of work with no hurry. It's also depends on rust on bolts and nuts

@asid731

8 ай бұрын

@@sushi_garage thanks

Complete waste of time and effort... The Fan and surround can be removed with the bumper and Radiator is position... 1. Remove wiring for resistor and fan + - 12v supply 2. undo and remove two screws holding the fan in place, then slide the fan to the side to allow it to move out of the retaining tabs... 3. jack the front of the car up so the wheels are about 4 inches off the ground, then remove the fan and surround from underneath the car... Only one side of the car needs to be raised. Install new rad fan in reverse of removal. Time taken about 45 mins Max...

@sushi_garage

2 ай бұрын

Maybe, but I was replacing radiator too and you can't remove it without removing a bumper. Radiator fan was just a "milestone".