⛐ Check out our Garage to see what tools we use and recommend: www.amazon.com/shop/worldmechanics ⛐ Subscribe and hit the notification bell by the subscribe button for new videos: kzread.info/dron/J9xpq0qUZevSEdBSFqO2ow.html ⛐ Our GoFundme Page: www.gofundme.com/auto-repair-guys

@Michael-ue8xc

4 жыл бұрын

World Mechanics How can I remove the grille at the bottom where the fog light is located?

Great video, I found it helpful. I was uncomfortable with how hard the clips were on the fenders and didn't want to brake them off. So I sprayed silicone spray on to the clips and they came off with much less force.

THANK YOU for posting this video! I needed to replace my daytime running lights but the little circular lid wouldn't come off the light housing - I tried to take it off by feel but couldn't see what I was doing. By pausing this video I was able to see the running light/turn signal housing inside the bumper and get it off. So helpful!

Thank you! You guys have saved me a lot of money!!

Your FIAT 500 videos are fantastic, thank you!!

Merci beaucoup pour cette vidéo. J'avais une ampoule W21/5W tombée dans l'optique du feu diurne. Je ne savais pas qu'il y avait un système de clips entre l'aile et le pare choc. Votre film le montre et permet de comprendre comment faire pour ne rien casser. Grace à vous, j'ai réussi à déposer le parechoc de ma Fiat 500 essence 2014. Puis démonter l'optique et récupérer cette maudite ampoule. Félicitations pour tout ce que vous faites. ;-)

thank you, nice clear instructions. made me confident to do it : )

Excellent imformative video, the great accent and chat really helped, best Front Bumper Cover Removal instructions i came across, thanks lads you really helped.

This saved me tons of time and trouble, thanks! ;)

Thanks for the info. I needed to remove my bumper so I could replace my corroded headlamps. This was perfect, thank you.

best video on the subject, I found 4 others and they took a bunch of crap off that they didn't need to.

This video made me confident on the removal of the bumper on my Lounge, thank you very much for posting this!

@WorldMechanics

8 жыл бұрын

+Nascasho Designs we are glad it was helpful! Thank you for watching us. If you ever have any questions let us know!

Thanks for the instructions!! That last clip, the tricky one, was a tough cookie, one side broke but never mind, the others are fine. Reason I took the bumper off was because one the light in it had dropped out. They are glued to the bumper with hot glue! I washed both parts clean and stuck it back on with bathroom silicon sealer, it won't come off again!! Also spent half an hour cleaning up the screws and greasing them ready to go back in. Thanks again!

Thank you. My gf's 500 had a dent in the front bumper. Removing the bumper made me able to remove the dent with a heater.

You guys are funny doing that work with all that jewellery on

2:51 you can see you broke a clip :/

So much better than the other video I found on this!

@WorldMechanics

8 жыл бұрын

+Alvin Brinson We are glad that it was helpful. If you ever have any questions let us know.

I'm in the middle of doing a clutch replacement on my 2012 Abarth. Would love to see a video some day on this. Very annoying to do without good info. Thanks for the great videos!

@WorldMechanics

8 жыл бұрын

+Robert Van Housen I think we will be getting an Abarth in the near future. Once we get one we will make many videos. How do you like you Abarth. If you ever need help with your vehicle let us know you can also find us on Our Official Facebook Page here: facebook.com/worldmechanicsofficialpage/?fref=ts

Thanks chaps my nehpews girlfriend has 1 of these cars and i have to remove the bumber, so i can do a repair and i wasnt to sure were everything was on this perticular car and now i do thanks for tje easy to follow instructions, now i can go ahead and remove the bumper, many thanks, i appriciate u making this easy to follow video.

spot on thanks

Great how to video thanks. I would not recommend to pull like shown at 2:48 (you can see a clip flying and that can break the clip's housing... but I'd definitely go gently and being more careful, like it was done on the passenger side :)

I’m guessing that you need to do this when replacing the headlight assembly. Thanks for the great info

EXCELLENT.

Thanks guys, really helpful.

@WorldMechanics

8 жыл бұрын

+mgoods12 We are glad that it was helpful. Thank you for watching! Hopefully you will find other helpful videos on our channel as well. If you have any question just let us know

Im going to do this. had a little fender bender and found the whole front bumper assembly online from FIAT for 375.00 looks easy enough to me. Just curious now about the right drivers side headlight , I had that as well/thanks so much

nice....thanks

GOOD VIDEO!!!!

Great Video... Very informative! Thanks Guys ... Love the accent! :-)

Changing the coolant on a Fiat would be great! Finding the drain plug on the driver side bottom of the radiator, took me about 2 hrs. I turned counter clockwise and started draining the coolant. Closed back up and added new coolant. Now I have a drip at the drain plug, gaaaaaacckk!

Thanks

hey can you guys do a rear bumper removal for fiat 500 please? thanks a million

I was changing the daytime running light bulb on the drivers side and as i pushed the bulb holder in to the slot the bulb dropped inside the light housing.By removing the front bumper it should make it easyer to remove the bulb.

Is it hard making those clips click back in place afterwards?

Do you have to take the whole bumper off to replace the little front grill under the emblem?

Very clear Video thanks. I need to replace the emblem on my car that is located on the front bumper. Is it possible to do this without removing the bumper??? I know there is a nut behind it keeping it in place...

@WorldMechanics

8 жыл бұрын

+Rody Koolhoven I do not think you will be able to do it but it will be worth t try it.

@rkh6872

8 жыл бұрын

+World Mechanics I removed the bumper yesterday with your instructions otherwise I couldn't reach it. worked perfectly thanx!

@WorldMechanics

8 жыл бұрын

Great. Thanks for letting us know that you could not reach it without removing the bumper

@kirkwor

7 жыл бұрын

You only need to remove the top 4 screws and your hand will fit/reach to the emblem nut, in my case with an 8 key, no need to remove the entire bumper.

Hi mate I own a fiat 500 lounge 1.2 petrol 2009, and I can’t find fuel filter, can you please tell me or make the video of the location ? That will be really helpful for everyone thanks

is this the same on the 500x

Very nice Video! How can I only remove daytime lights?

@WorldMechanics

8 жыл бұрын

+Jose Cito We are glad to hear that the video was helpful! I hope you find other helpful videos on our channel as well. What year is your Fiat 500. We will make a video and post it soon. If you ever need help with your vehicle let us know. You can also ask us on our Official Facebook Page here : facebook.com/worldmechanicsofficialpage/?fref=ts

@juanpear

8 жыл бұрын

+World Mechanics is 2013 pop it is almost the same. ;) I will share your fan page

@WorldMechanics

8 жыл бұрын

+Jose Cito We made a video how to turn off the daytime lights off. We will publish it tomorrow. Do you need a video how to remove the actual light, or the just the light bulb? or just how to turn them off?

@WorldMechanics

8 жыл бұрын

+Jose Cito if you need the video how to remove the daylight bulb, it is right here: kzread.info/dash/bejne/eJ2KpqR7ZM3Aops.html we are replacing the turn signal bulb but the day light bulb is located right next to it.

Does anyone know if you can remove the front bumper of a 2010 fiat 500 and replace it with a 2017 front bumper? Will it fit easily (obviously going to get the headlights to fit also) but just wondering if it's doable are they the same size or not? Thanks

@roccol3110

4 жыл бұрын

If your talking about the Series 4 EU bumper, then Yes! Watch this video... kzread.info/dash/bejne/i4aOmaOJitiqe84.html

What are the bumper clips connected to in 3:19? Would those be the brackets?

@rs7515

3 жыл бұрын

Sorry, 2:58

I saw a 2017 fiat 500 with a 2012 front bumper.

you are a fucking life saver thank you!!

You can you find me how to take the bumper off

Thankyou fixed daylights happy girlfriend 😅

Why slowly on side and pull hard on other

Wtf i thought this will be hard?

I am sorry, I could not watch pass the 3rd minute, your accent sounds like you are gurgling in water!

nice....thanks

@WorldMechanics

8 жыл бұрын

+lilacee320 We are glad to hear that the video was helpful! I hope you find other helpful videos on our channel as well. If you ever need help with your vehicle let us know. You can also ask us on our Official Facebook Page here : facebook.com/worldmechanicsofficialpage/?fref=ts