Festool ES ETSC 125 - Cordless edge sander
Тәжірибелік нұсқаулар және стиль
#Festool #Sanding #Cordless #edge #sander
/ @mwdesigns3764
Instagram - / manorwooddesigns
My Etsy shop - www.etsy.com/uk/shop/ManorWood
Web Site - www.manorwooddesigns.co.uk
Patreon - / manorwood
Facebook - / manorwooddesigns
Amazon shop - www.amazon.co.uk/shop/manorwood
Пікірлер: 55
This is a great review and understanding of how to use the tool and how good it works. Thank you.
That’s your new best friend buddy! Great bit of kit.
Haven't seen this video until Know. What An amazing handy tool.
Bloody top notch idea, about time something like this has hit the market. 👌🏾 Nice run down, mate, it'll definitely be earning it keep in your shop! 👍🏾😉
I have the DTSC 400 and RTSC 400 and I love them. The edge sander using the ETSC 125 will be the next sander I buy. I do a lot of 3/4 inch material edge sanding and on a thin edge rounding the edge is a bigger challenge.
Now that's a sweet machine and perfect review.
Great review and thanks for your honesty and remember#stay safe and make. 🍺🍺👍👍
On my shopping list. One of those tools that make you think 'why haven't I already got one of these?'
Some job Andy, now I need one......👍👍🇮🇪
Great review, Thanx.
No doubt, Festool is the innovator of tool making.
Looks awesome and will be very productive in your work no more sitting about lol
It's a bloody good idea to be fair. One of those that makes you wonder why we're only seeing something like it now.
@ManorWood
3 жыл бұрын
I know very odd it’s a great idea
I so need one of those. Great review!
@timmummert9811
3 жыл бұрын
Just checked...and ordered, the attachment for $99.00 USD!
@ManorWood
3 жыл бұрын
Great !!
Also you can buy a 240 volt plug in cord for these festool cordless sanders so you get the best of both worlds.
Hi Andy, great video, if you already own the ETS you can also buy this as an attachment.. $99 here in the USA..
Fantastic review as always just about to order one 👍 out of interest where did you get that little square from looks great quality many thanks
would be awesome if they sold the 90 degree attachment for the ETS 150 Sanders. I really don't want to have to buy all the Sandpaper for a 150mm and a 125mm Sander.
Andy Thanks Great review short and sweet to the point 😉 Looks like an accessory we’re all going to be adding Can you show us the hose drop you have set up and how you’ve connected it to the vacuum I like the idea of it overhead without a boom arm
@ManorWood
3 жыл бұрын
Cheers , It’s my own boom arm it test at the moment will be for sale very soooon
you are right that edge sanding is a difficult thing , I find since getting the Mirka deros sander it's now easy, because of the low center of gravity, sure a fancy dedicated tool would be nice ...
@DBHDesignLtd
2 жыл бұрын
Iluka tools do an edge sander for the Deros now!
👍🔥
Looks very niche!
When did they have the angle attachment with the sander as a kit??
Neat guide idea, but I don’t see the point of cordless sanders myself, I always have my vac connected to a sander, so the power cable is always right there to plug in...
@ManorWood
3 жыл бұрын
If you’re just working onward the collection system on the bill in little bag is absolutely amazing you do not need a card or a black hose
@simonkade7052
3 жыл бұрын
Pro tip : watch series on flixzone. I've been using it for watching lots of of movies these days.
@millerstetson4330
3 жыл бұрын
@Simon Kade yea, been watching on flixzone for since december myself =)
I've done a great job so far, but I think I'll have more beautiful works in the future. ^O^
What's the part number on this? Want to make sure I get the systainer that holds the sander with the attachment
You can use this with a corded version of this same sander I believe, right?
Hah, I knew it! Nice man, wanted to see a video on this machine since I was thinking of getting one... guess I'm getting one :D. Looking for a random orbit sander aswell, do you know what the difference is between the rotex that you have and a festool ets 150/3 and 150/5?
@ManorWood
3 жыл бұрын
Rotax is a good all-rounder if you going to get one Sunday get that 150 I have is an air one and I use it for final light finish and is much easier in the hand to control
@zacharydixon631
3 жыл бұрын
Old reply but 3mm vs 5mm sanding stroke. 3mm is a smaller scratch pattern for more of a finish sanding vs slightly heavier material removal with the 5mm.
@Baziell
3 жыл бұрын
@@zacharydixon631 thanks for the reply. Very helpful :)
Costing me a fortune 😄. I assume you could fit the battery mains adaptor and then it's a mains unit too?
@ManorWood
3 жыл бұрын
Yes I will be ordering a mains adapter soooon
Looks very useful, but as always with festool I shudder to think what the cost will be.
@ThekiBoran
3 жыл бұрын
Looks like $99 for the angle attachment and if you don't have the etc 125 another $205. I have the ets ec 150 which is $525, I was guessing $200 for the angle attachment and $400 for the sander. Wrong. $305 plus tax in the US gets the sander and angle attachment. I might get out the cc cuz this is the shiznit.
It'd be nice if Festool had an edge jig for the RTS 400, or the ets ec 150
@DBHDesignLtd
2 жыл бұрын
Check out Iluka tools ;-)
@ThekiBoran
2 жыл бұрын
@@DBHDesignLtd I don't see a website. Besides, I just bought the Festool sanding guide and the 125 etsabcd.
So I guess if we already have the sanders we can buy it as an accessory. Get the battery with the plug in option to run directly off mains if using extractor. Is your extractor got a boom arm or just a wall mounted arm.
@ManorWood
3 жыл бұрын
I will get the mains plug , it’s my own boom I am testing it at the moment, it will be for sale very soon !!:)
May be cordless, but you still have a hose connected.
@ManorWood
3 жыл бұрын
As I said in the video I’m simply connected in the hose because I’m doing resin and I do not wanna block a nice little bag it comes with if you’re working on would you do not need a hose the sawdust does not stick or block the bag
I mean it's not a bad tool but it's a Festool and we already know the price is going to be outrageous. Sure it's gong to be easier but I doubt it's worth it. Just take a few extra minutes out of your work flow to ensure your sander is even on the edges. I mean you have a wide belt sander and probably drive a Bentley so maybe you have a different perspective :)
Another $1000.00 dollar idea.
@timmummert9811
3 жыл бұрын
The attachment is $99 USD if you already have the sander.
@ManorWood
3 жыл бұрын
Arr $99. So your guess was a little hi lol
@thewoodshop69
3 жыл бұрын
@@ManorWood look at the rest of their stuff. They could've mad a fortune on this.lol