I worked a few times with the Fertan Converter and i love it! i have the hole underbody from a camper van covered with the converter and it worked perfectly greetings from Germany

@Thefabforums

7 жыл бұрын

thats awesome...I think it probably my favorite

Gel has its use where you can't necessarily remove and dip, and for rust on a panel. The gel makes it stay put and not run down the panel.

Used the black bottle Fertan last week and looks like it works as advertised. Removed the loose surface rust and applied it with a new brush. Let it sit for two days and washed it off with a hose. You can clearly see the converted ex-rust spots. Will paint the places and see how long it holds this winter.

@ravdobrzynski

Жыл бұрын

and..... 4 winters

excelente producto. maravilloso resultado. saludos.

@Thefabforums

7 жыл бұрын

thanks

Great review, Kyle.👍 I'm not sure if the name brand was Fertan (maybe it was), but a friend of mine used the rust converter on an old 5' x 8' trailer and worked like a champ. Easier and less messy than sand blasting, and the end result was pretty nice. Thanks again.✌

@Thefabforums

7 жыл бұрын

yeah I could see it working well for that. i bet it gave it a look like it was coated with someing

If I put that rust remover on my CJ7 there might not be anything left. Lol

@Thefabforums

7 жыл бұрын

lol

that's one of most funny videos I have sen recently (I am an industrial chemist) especially calling 'marinating' the chemical reaction between ferrous oxide and phosphorus acid :-) !!!

@VladekR

7 жыл бұрын

oops, just checked, they use tannic acid not phosphoric acid (cheaper but need stronger oxidiser)

Yeah me too. I just busted my hump last month on my rotors and spidals. Have to look into that. Looks good. Great actual in the acid bath. I wonder if it would be good for a set of 4 caburators bolted next to each other for a street bike build I got going on?

@Thefabforums

7 жыл бұрын

yeah it worked pretty well...

LOL, you mix chemicals like I do. I'm impressed how the rust remover worked. To bad I'd have to use the bathtub for the Dana 60 axles. I've tried rust converter once, it actually worked pretty good, except for where there was heavy scale. Aerosol paint adhered to it good. Wondering what are peoples thoughts on soaking rags with rust remover, and wrapping them around the axle. It would save me from chipping the bathtub :)

@Thefabforums

7 жыл бұрын

lol

Could I use any of these products on fenders or rocker panels of a car?

great video, this is exactly what I was pondering about with my 99 Cherokee underbody that covered in rust. Thank again for another great product review

@Thefabforums

7 жыл бұрын

I think it would work great for that....no problem

Great video keep up the great work bro.

@Thefabforums

7 жыл бұрын

thanks

@davidcarpenter6121

7 жыл бұрын

would you ever do a Q&A about what cars you like and why?

Cool review man👍🏻. Might be looking for something like that for an old flathead we just pulled out of a frame in a field 😂

@Thefabforums

7 жыл бұрын

I would work great for that

That's awesome man imma have to get me some

@Thefabforums

7 жыл бұрын

it does pretty well

Cool stuff

How do brake pads work with the rust converter

can you prime over the rust converter? I'm thinking that might be good for the underbody and frame rails of my project.

@Thefabforums

7 жыл бұрын

Yeah it says you can paint or prime over it as long as its within 6 months - fertan-usa.com/wp-content/uploads/2016/12/FERTAN_Rust-Converter-Flyer_2016.pdf

Love your videos. I just bought a 1939 Packard and it has some rust issues. Since I live in Greenville could I bring it by for you to inspect and let you know what you can do?

@Thefabforums

5 жыл бұрын

Sorry I dont take on any customer work right now

This is pretty cool

@Thefabforums

7 жыл бұрын

thanks

i bet you would get good results if you put all the other products in a dip tank too?

@Thefabforums

7 жыл бұрын

yeah probably

I'm interested in the remover, I wonder if the gel is like Navel Jelly. Also in the converter looks like Loctite Extend, rust neutralizer. They do the same thing. If the price is right I'm on it.

@Thefabforums

7 жыл бұрын

the stuff seems to work pretty well

@charliespann3967

7 жыл бұрын

Cool. Have you tried block type molasses? You get it at where they sell animal feed. You disolve it water. It takes rust off and it's cheap. Takes a while though.

what does 10% look like, if you don't know ? 3 gallons = 3 x 8 = 24 pints divide by 10 = 2.4 pints / 1.364 litres, but this could different if it is a sunny day, you made me laugh, so you have made me happy, thanks.

I happen to keep 3 gallons of water in my shop too.. as well as rusty parts LOL

Could do the same with vinegar

🙌🙌🙌🙌🙌

the question is... is it going to be safe and effective to paint over without any primer/sealer issues? will the rust come back later like it does on vehicles that aren't properly stripped with rust repair etc?

@Thefabforums

7 жыл бұрын

it says it can be primed or painted over

@nickf223

7 жыл бұрын

The Fab Forums that's interesting. think I'll give it a shot when I repaint my truck bed.

@RatKindler

6 жыл бұрын

There's a guy on KZread that compared rust converter with enamel paint and found that they both had rust come through underneath in one year. The rust converter didn't work any better than paint alone.

👍👏

For the Rust remover does it say how to dispose of the used liquid?, I checked the link and it really doesn't say, just that it is environmentally friendly. Great Vid., keep the products coming I am all for anything that makes the job go quicker!

@bobs.8318

7 жыл бұрын

Found the answer on how to dispose of used contents in the MSDS, says dispose as per local, state or national regulations.- Not much help unless you know what they are. LOL. here CA.that means haz mat center.

@Thefabforums

7 жыл бұрын

lol....yeah Cali is tight for sure

Oke 6monts , i think when you put some paint over it it is stay a longer thime good

You can't turn rust into zinc. Rust is ferrous oxide which is iron and oxygen. There's no zinc there.

I REALLY hope that the fact that you used the bibster parts to test this stuff means..... more work on it is coming soon???? that rendering of it looked awesome and I'm excited!

@Thefabforums

7 жыл бұрын

yeah should get started on it very soon

That rust converter might be good for maintaining your boat trailer health. I've done a lot of repairs on trailers that rusted from the inside out.

@Thefabforums

7 жыл бұрын

I could see that

The gel maybe good for large items the have large rust scales. The converter could be a good for the inside of doors and quarter panels.

@Thefabforums

7 жыл бұрын

yeah for sure

Rusty bat I saw this episode on Breaking Bad!!!! hopefully nothing falls through the floor. JK

@Thefabforums

7 жыл бұрын

lol

Which is better Fertan's Rust Remover or 3 m 35132 Mar-Hyde 3513 One-Step Rust Converter Primer Sealer?

@Thefabforums

5 жыл бұрын

not sure, but I didnt really care for this Fertans product

@mixrug3041

5 жыл бұрын

Thank you.

@mixrug3041

4 жыл бұрын

@FERTAN USA Yes, I know. I wanted to compare which is better.

It would be great to use that converter on the rusty wheel well bubbles on modern trucks that are just starting to bubble; convert, primer, seal, paint, clear that would work great

@Thefabforums

7 жыл бұрын

yeah for sure...I have actually used it on a few small parts of the dually

Rust converter, convert your rust into gold!

The gel works best when used with scotch-brite, don't need to really scrub hard but it works better to loosen it up and work the gel into it better/ haven't used this brand but have used others/ and the key is to NOT let the gel dry out because if it does it is a lot harder to clean up

@Thefabforums

7 жыл бұрын

gotcha

I be wearing some eye protection around that shit !

@Thefabforums

7 жыл бұрын

yeah its not a bad idea

Nice vid

@Thefabforums

7 жыл бұрын

thanks buddy

~3 gallons == ~384 ounces, so 38.4 ounces

@Thefabforums

7 жыл бұрын

yeah I am not real sure how much water I had...3 gallons was a wild guess. I probably should have been more precise

1 gallon = 128 oz.....3 gallons = 384 oz ..... 10% = 38.4 oz....Probably close to the whole bottle...Didn't show how much was in the bottle

@Thefabforums

7 жыл бұрын

+zeke112964 yeah I wasn't exactly sure it was 3 gallons

now try the same with a tub full of cocacola and leave it overnight to see a comparison

I thought I turned up at a bloody rock concert.....

@Thefabforums

6 жыл бұрын

awesome

Rusty Bath*

try "evaporust" www.evapo-rust.com/ amazing stuff, can be used on anything and it wont harm plastic or anything else.......never tried something with wood on it though

@RatKindler

6 жыл бұрын

Evaporust is awesome but expensive for large parts. I use sodium biphosphate (acid) which is much cheaper and more effective than vinegar, which some people in the comments are recommending.

Rust remover not practical unless for small parts or tools. Rust on a vehicle needs something paintable that will not run off.

@ravdobrzynski

Жыл бұрын

gel

hey OU warum auf englisch????Warum nicht auf DEUTSCH?!

Turns rust into zink ! 😂😂

The subtitles is a pain

First

@Thefabforums

7 жыл бұрын

boom

That stuff is real bad on eye balls.

@Thefabforums

7 жыл бұрын

+Stanley. Watson yeah

cheaper way to kyle see mrpete222 Chanel on KZread nice old mr pete lot of video playlist Love his Chanel gr marvin Ps dont smoke a over that shit May explosie

@Thefabforums

7 жыл бұрын

I had someone else link one of his videos

@marvinlokers7412

7 жыл бұрын

put breaks in a lathe look kyle brand new!

@Thefabforums

7 жыл бұрын

lol....yeah but then I wouldnt be able to make a rust removal video

@marvinlokers7412

7 жыл бұрын

After you clean

Bro! It's good bro, like 10%, I ain't dooin all sorts of math bro. I'll put a car together you can drive but bro math is for nerds. I love moose tanks. Everyone knows you don't know. I thought it be like no rust bro