Steering and Brake upgrade is a MUST!

@carlrice6989

9 ай бұрын

what you do to the Spurs ya gotta do to the Reins ,,,,

@jasonmorales1846

9 ай бұрын

@@carlrice6989 Exactly!!

600hp and you couldn't rip on it once ?? Boo... get that pansy chevtard out from behind the wheel 🤣🤣 great build guys 👍👍

A "shop truck" with 5.87s, dual quads and the aerodynamics of a brick. and premium fuel $4+ a gallon.. Perfect... It only costs you 75 cents a mile to drive it, no big deal.

If you want to die of alcohol poisoning, take a drink every time Eric says, “now.”

@kevinfox500

9 ай бұрын

Lol! For the stoner crowd, take a hit, for the best couchlock, Ever.

Nope, modern disk brakes and a steering upgrade would be needed.

@kevinfox500

9 ай бұрын

My thoughts exactly. Wife abd I built our 69 the same way, eith scavenged parts from the yard we bought in 05. Just to get the base set, as a starting point. We upgraded to late 90s F 250 sxels and driveline, 7.3 IDI, 6 speed manual. Then we went to Summit and EBC. Ordered up bushings, steering components, and other parts. Not so much for our safety, as we had good braies for what we haul from the factory. But as someone who lost his future to a drunk driving a sketchy old farn rod, and carries his own guilt, the other side of that coin is one I Never want to see. Because I wouldn't wish my own side on anyone. Every vehicle we own, from the bikes to the van that grants me freedom from a wheelchair, the first thing we do is upgrade the tires and brakes. If the steering was good, uprades were held off until the miles add up. I love my wife and daughter. They are my world, joy, and reason for living. Even disabled the only thing that stops me, is Me. But they will never replace the one I lost. A grand to upgrade brakes is nothing compared to the value of your project. $31k compared to $30k. A thousand more dollars may save your, or someone else's life, or family.

@jasonmyers3847

9 ай бұрын

It needs upgraded wheels and tires, too. Maybe a set of new Alcoa duelie wheels.

I always prefer the original instrument clusters with the old cars or trucks

@Spiritof_76

9 ай бұрын

Totally agreed. They are so much more interesting than a group of round aftermarket gauges. Classic car interiors had so much style.

I respect the build. I really would have enjoyed the I6, though. But. I respect this. Thanks y’all.

No burnout? Sheesh!

I fell in love with this truck ❤

The I6 probably detonated because of intercooler location. Intake Temps must have been stupid hot.

You're 85% there... You need to do the front end upgrade and brakes... or did you run out of project budget? also, you did not show a full 6 gear run through. 1st gear is is probably LOW. I was expecting you to row through the gears... If It's that sketchy, then what's the point if you can't use it to it's full potential.

@kevinfox500

9 ай бұрын

Future content. They did say, put this sketchy thing away, for a while. It's not only budget that can stop or delay a project. F8nding parts, manufacturing delays, shipping issues, and needing to track down a donor car can all lead to production delays. Our shop has a couple that have sat since 2019, due to lack of new, or NOS parts. In our spare time my wife and I fab new ones. So don't worry. That beast will be back.

I would've liked seeing trans tech for the 300 inline 6 they built other than the 4 speed.

If these guys got a good balanced stance about them, they might be able to slam the doors and hood even harder

+1 subscriber from Georgia 🇬🇪 💖

Cool truck and a cool motor, but I don't know if they belong together.. that's a lot of power for that rusty old frame. Frankentruck.

Disc brakes and rack and pinion steering next.

What? They didn't even stand on it a little bit? WTHA!

@robertfarrar9411

9 ай бұрын

YEAH!!!!!

Does the horn work? If so, son, never mind them brakes.

Clearance, Clarence. Roger, Roger. Surely you can't be serious. I am serious and don't call me Shirley.

@leddygee1896

9 ай бұрын

That movie is almost as funny as Blazing Saddles!!🤣🤣🤣Mel Brooks is the king, Baby😎

@thespicemelange.1

9 ай бұрын

@@leddygee1896 What in the wide, wide world of sports is a goin on here?

@thespicemelange.1

9 ай бұрын

@@leddygee1896 where all the white women at?

You have to bring this truck back for another episode to update the steering and brakes I love the engine and transmission great combo but EBC lol come on man do it right That stooge behind the wheel cant drive a Ford anyways😂 That may have been the lamest test drive EVER👆💯

Please tell me if you plan on using this monstrosity you plan to change the rear gears and put a box on it! Personally i would have left this 1 the way it was, fixed the 6 and ran it. The FE would have found a full body truck to go in

What about the exhaust system?

Glad to see the 350 get re purposed

@helker8909

9 ай бұрын

Don’t you mean 390 FE

@Doogie_Causey

9 ай бұрын

@@helker8909 the truck is a 350, engine is 390fe

@helker8909

9 ай бұрын

Literally thought you mistyped what the engine was my bad

@Spiritof_76

9 ай бұрын

@@helker8909 An "F" in front of the 350 would have made it clear. Chevy 350 and LS swaps are so common.

Absolutely disappointed. 600 hp stick shift truck and we didn't get to see 4 black marks on the road behind it.

@johnlocke_1

9 ай бұрын

Burn outs are dumb.

@eddiehennig7835

9 ай бұрын

​@@johnlocke_1- So are you!

@3751britishcolumbia

9 ай бұрын

​@johnlocke_1 You may think it's dumb but clearly, there are way more people who think otherwise.

@johnlocke_1

9 ай бұрын

@@3751britishcolumbia I guarantee there are more people who think it's dumb af than in support of.

@Coronet_shop

6 ай бұрын

@@johnlocke_1wrong territory fool

So this was an EBC break commercial? Okay, got you.

@Spiritof_76

9 ай бұрын

Since you are into cars and trucks, might as well learn to spell "brakes." This show is a little bit tech, and a whole lot commercials. If you want to edit your comment, I'll delete my rude reply.

@thespicemelange.1

9 ай бұрын

@@Spiritof_76 didn't even notice that thanks for pointing that out but yeah autocorrect sucks. This is what happens when you use talk to text. And I was kind of being facetious anyways.

Still disappointed that they never acknowledged what happened to the i6

@bmstylee

9 ай бұрын

After a few hard dyno pulls in the truck it was belching white smoke. So the supposed unbreakable engine broke at power levels the average small block would live forever at.

@infernoking7504

9 ай бұрын

@@bmstylee ford 300 wasn't built to be a hp killer its all about torque and pulling so yeah Ik it blew up. Do that to other engines that weren't designed to do that I bet they will blow up too.

@bmstylee

9 ай бұрын

@@infernoking7504 big blocks and 383 strokers are also built for torque yet they don't break when you put some power to them. The 300 fan boys can't accept their holy relic tapped at power levels that a mildly built small block would comfortably live for 200k miles at. It's long obsolete that's why we use other engines now. You could build something that would easily make double the power with what they spent on the 300 and live a long life.

@3751britishcolumbia

9 ай бұрын

​@@bmstylee Your comment shows that you don't know much about the 300.

@3751britishcolumbia

9 ай бұрын

​@@bmstyleethere are Ford V8s that were made for torque and can handle big power as well, so what's your point? We're talking about an inline 6 that red lines at an rpm below what most engines normally shift at.

You forgot to install the chrome lady mud flaps.

@Spiritof_76

9 ай бұрын

Tacky, but completely appropriate. I'd like to see an accelerator pedal shaped like a giant bare foot, too.

What's it do in the quarter???

Is it For Sale

How'd you manage to build a 300 with no low end!?!

@Bobthebuilder.69

9 ай бұрын

It took FOREVER to spool that turbo. A smaller turbo would've been so much more streetable

Miss the turbo 300

Sweet build

600hp 600 ftlb Ok no burn-out 🤦‍♂️hope you boys ain’t getting soft. I can hear the fe from under the calling you out…..

Why the heck would you even keep the 5.87 rear gear in this truck to begin with? You could easily have swapped out a 4.56 with LSD. You'd still have plenty of grunt, and you wouldn't necessarily need two overdrive gears to drive at highway speeds without turning 3000 RPM.

FAIL for steele rubber. I tried to look up my vehicle: 0 products found for 1990 F350 crew cab, Again: FAIL

@Spiritof_76

9 ай бұрын

They make products for vehicles people actually give a shit about that aren't just disposable dime-a-dozen fare.

@ScottPlude

9 ай бұрын

@@Spiritof_76 That is one hell of an angry response. I hope you have a better day.

@Spiritof_76

9 ай бұрын

@@ScottPlude You seemed angry that one company didn't make a weatherstrip for your ordinary truck. Sounds unrealistic. Rather than angry, I was just pointing that out. The FAIL was you not understanding the point of specialty manufacturers.

@ScottPlude

9 ай бұрын

@@Spiritof_76 wow, you felt the need to respond in the first place.... maybe (just maybe) I wasn't speaking to you at all and your opinion didn't matter? You're blocked now. yes, you can block negative people on youtube.

@Spiritof_76

9 ай бұрын

@@ScottPlude Public forum? Expect to get called out for dumb comments. The people at Steele got their feelings hurt, I'm sure. Why didn't we make weatherstrips for 1990 F350 crew cabs? 40 lashes for everyone!

Do brakes, steering, suspension, wheels/tires, and decent seatbelts. Then actually drive the thing.

Just use millimetres. Just so much easier 😂

@bmstylee

9 ай бұрын

You're preaching to the choir on that one.

@RetroCheater81

9 ай бұрын

As long as you’re not jumping from feet to inches its no different. Didn’t even go into fractions. Pure decimal. Not sure why that would be hard.

🛻

I saw a Beautiful 60 Vette Convertible the other day ,,, I slowed down to gaze at the Beauty for a couple of minutes,,, then I cranked back up to a higher speed in my E36 "M" Convertible,,, maybe throw some Body work and PAINT at that RUSTED Thing,,,,? "What would Chip Foose DO ??

@bmstylee

9 ай бұрын

Remember that the rust bucket look is better than a clean rod. Let's spend 20k+ in drivetrainin addition to other parts and not bother making the outside presentable. Patina is old English for cheap and lazy.

Always loved one thing about Ford… they aren’t shy about finding the problem and circling it! 😂 Chevy babyyyyyyyyy!!!

@eddiehennig7835

9 ай бұрын

Typical Chebby lubber: "Gotta go down to the Walgreen's and git me a chrome bowtie dress-up kit and an Edelbrock carb for muh 350. Then she'll make about 500, derp!"

The flying rush bucket / I get FORD =full, of ,rust, dude.

All she needs is a crown Vic front end! 👍🤘👏

Very disappointed. I wanted to see you hammer down. What good is all that hp, if you can't use it???🤏🤦